Відео

Good work and great instructions

Simple and straight to the point . thanks

Fantastic informative video I was struggling, just realized my compressor is running at 8 bar should be at 2.7 bar 40 psi max. Do you have a video on clear coat? I had cobwebbing yesterday, so I gave up

You have taught me about the spray gun, thank you sir.

Thank you 👌👌👍👍✌️✌️

Very interesting that there was no polishing of the final clear coat required.

Thanks Russell. I have gained some very good advice from you, Scott and Chrissy. All of your staff are very polite and answered all my questions thoroughly. Your paint mix matched up very well for me. I really appreciate you all.

Orange peel.

Russell you should make more videos! Best paint store in the Northwest!

thanks so much forn this excellent course

Very informative the best short video on pain gun adjustment thanks

PHENOMENAL video! About to spray my 1970 442. Been painting forklifts for 5 years but wanted the car to come out looking like a professional job. The horizontal run test was like a lightbulb coming on. Never thought to test it that way.

one thing I did for my airless was get an old plywood plank and started to staple those free brown paper and cardboard from packages to it then I can tear off the paper as I use it and I don't have to "store" the paper

Nicely done, simple, straight forward and informative. Thank you.

good video that is that the iwatta series 2 WS400 AND LS400

Great Video Thanks

Excellent Video... Thanks 👍🏻

I have to say this is the best informational video on how to use a spot blender I have found. Your responses to the other questions have been great too! I would like a little clarifier. Do I need to sand off the old clear coat on the rest of the paneling that I am not doing a repair on or does the spot blender save you time on not having to sand it? Also, do you apply the spot blender over the new clear coat as well?

This work perfectly I have the same green gun,x2020

😮Does Auto Paint Plus sell OEM colors such as 1970 Chrysler b3 blue, and would this clear be more cost effective do to less product being used

Paint it one day bake it for 5min then try buffing 3-4 days later ..what’s the point of that ..dumass

Can u use this as a primer and paint over it

When did John Cena start painting cars

Thank you your video 👍👍

Merry Christmas Auto Paint Plus!!

Best video of set up I have seen!!!!🎉A++++++

How is the results when you spraying with the air green spray guns?

You're standing right in front of the blend area though 😢

How can I get my hands on some AA Yellow?!

wHY the orange peel texture?

Awesome video. Russ knows his stuff!

Can you tell me the names of the cans, each one, please🙏

Is your air hose leaking air or what’s hissing

Great video. I've never heard about spraying the pattern horizontally to check that the volume is even. That's a great tip. I've had some trouble with tiger striping at times and I think this will be very helpful. I'm usually around 30 psi at gun with single stage acrylic enamel. Is that about right for that type of paint?

Great video. Thank you

How you sand it ? please show me

Good advice. I set my pressure at the air compressor's outlet but didn't realise the gun itself may not be letting enough air through so I'll try opening it right up. The manuals for these aren't great, they tell you what the adjusters are for but not quite what they do like you have here, thank you.

This was awesome! I was literally going to my DIY booth to spray some primer for about the 2nd time and remembered that I’ve never really sat down and learned the dialin process. Thanks for putting this together!

I hope this one don't Crack and split like most others

Looks like high build or father fill to me These two products work fine for me I dont see any difference

Once set, won't the fan pattern for straight solvent (thin) be different than when thicker paint comes out?

Hey excellent paint job , what ratio do you reduce or mix the S1918 blend base ?

Great video, no unnecessary filler. Thank you.

Im still learning. I laid down some epoxy primer and it came out great. I laid down black urethane and it was textured! I probably need to mess with the knobs and also my spray tips.

I have to agree with some of the comments, a short and to the point video great for beginners which I am too. Thank you. Did not think to pour some thinners into the gun and test the fan pattern before paint is used. A question though, will the fact that paint would be a bit more thicker than thinners will that drive the need to adjust the gun for paint or am I over complicating/thinking it? T

Praise the Lord. I may be able to dial mine in now.

Lolol trying to make a good gun look bad very informative vid thanks

Would you recommend this spray filler with 1/4 inch dents, tiny holes, and welding imperfections? Car was in a wreck and I'm making a project to restore it (96 Camaro). Good with my hands but not a pro at this type of stuff and saving time is always a plus.

is the first product you used, prior to base coast, the same as adhesion promoter?

I can just tell by looking at that quarter panel that it is not straight at all? It definitely needs a nice evenly spread coat of filler and blocked out nicely before spraying any of that on there. Doing the filler work really good is a much better way to go that loading this stuff on so it can crack down the road. Just speaking from experience after doing high quality restoration work for over 30 years.