Відео

I'm a pedal newbie. I purchased this pedal to use for bass but then I discovered it was actually guitar pedal. However It did sound well with you bass so I will see what I can do with it. Like you said, I am only out $25 US.

I have a first version ID Coe stereo 40 which i bought used for $100USD a few years ago. I'm happy with it and plan to mod it with switched 1/4" output jacks to drive external speakers I plan to build for it. these will be 4X12" vertical tpwer cabs with built in mini amp boards and power supplies each for even more power output from the cabs. that when stood together side by side wuth the amp acting as a head will in effect be a full stack. with output of up to 200 total watts or more depending on the amp boards i install in the cabs. my guitar has 3 quad rail/coil humbuckers with wiring like a 50'sles Paul with coil splits too many tone veriations to count. Add to that all of the effects built into the amp and I get virtually unlimited tones available from my little rig already. with the 40 watts I have on tap. and cranked up full it/s loud enough to annoy the nosy neighbors. or I can go stealth mode with a good pair of headphones. that way i can hear it as loud as i like and nobody else can hear. .. as loud as the amp is to begin with, just imaging it with the powered cabs i will add soon. lol Wanna Play???

Sounds like a cheap piece of $hit.

Any ideas where to purchase the Tremolo bar? I can't find it.

Yes!!!!!! thank you!!!!!!!!!!

Great video, thanks a lot!!!! Could you please ask where the ground wire that you have connected in the center of the 3pdt is soldered? It seems to go to the input, but it is not clear where exactly. Subscribed and thanks a lot for your contribution.

Dear Bass Pedal Show Team, I am writing to request permission to feature or use the song titled "Timmy Time Metal Version," including both the cover and duo versions, in a project related to your show. The song is a metal rendition with explicit content, and we believe it would be a great fit for a segment or collaboration. Please let me know if this is possible and if there are any guidelines or licensing details needed. Thank you for your consideration, and I look forward to your response. Best regards, Keven Casimero of the Philippines ❤❤❤

how do u replace the batteries?

eBay only dropped its seller fees in the UK, so reverb might take a hit but here in the states (and everywhere outside the UK) we still have the same eBay fees.

Whats reverb lol

Thanks for the man hug guitar bro, it's been a fucking horrible day man for a while I needed that

Hello, Just wanted to ask, I know it has been some time since the video came out, but what's the action on your low B and high E sides? I find the guitar to be extremely hard to set up without getting buzz everywhere, but it might be just my unit.. hence asking :)

muchas gracias, en serio , me ha sido de gran ayuda🙌

👏👏🙌❤

nice FGN. Does the string thru stop tail combo actually improve resonance? also, how does the circle freeing system feel under the fingers?

Mode 2 is my favorite to use on pushing an already dirty & gritty pre-amp. The tone range in mode 2 covers the whole spectrum, which works nice on amps that have a natural midscoop. Mode 1 reminds me of a RAT, or OCD, goes from a light drive to full on distortion. Mode 3 has a more fuzzy character to it, almost like there's a slight clean blend going on among the mayhem. But, you really need to push the volume in Mode 3. Overall, it's related to the Plumes, but it's more it's own thing, I'd say. The gain character is different, and the range of the tone seems wider, or at least shifted to be more useful for lower frequencies, although it still has that sort of mid-hump. Took me a while to appreciate this pedal, but now it's a mainstay on my board.

Jones cribs manufacturing,, PLANT ,, isn't my baby blood I was born with 👶🎤🙏🧚‍♀️👶🎤🙏🧚‍♀️🖼️🆎🅾️🅰️🅱️🚼🚼🚼🚼🚼🚼🚼🚼🚼🚼🚼🚼🚼🚼🚼🚼🚼🚼🚼

Me not born with voice impersonationist for science blood 👶🎤🙏🧚‍♀️👶🎤🙏🧚‍♀️🖼️🅱️🅰️🅾️🆎🔊🔊🔊🔊🔊🔊🗣️🗣️🗣️🗣️🗣️🗣️🗣️🗣️📢📢📢📢📣📣📣📣🅱️🅱️🅰️🅰️🅾️🅾️🆎🆎🎚️🎚️🎚️🎚️🎚️🎚️🎚️

I'm a twin reverb head cyber sex bully ,MINNESOTA TWINS MANUFACTURING ,, PLANT 👹🎮🙏🎤🖼️🅱️🅰️🅾️🆎🏘️🏘️🏘️🏘️🏘️🏘️🏘️🏘️🏘️🏘️🎚️🎚️🎚️🎚️🎚️🎚️🎚️🏘️🏘️🏘️🏘️🏘️🏘️🏘️🏘️🏘️🏘️🏘️🏘️🛌🛌🛌🛌🛌🛌🛌🛌🛌🛌🛌🏘️🏘️🏘️🏘️🏘️🏘️🏘️🏘️📍🗺️

Pedal car manufacturing ,, PLANT , Isn't my babies blood ,, me not born with that kinda blood 👶🎤🙏🧚‍♀️👶🎤🙏🧚‍♀️🖼️🆎🅾️🅰️🅱️🚌🚌🚌🚌🚌🚖🚖🚕🚕⛽⛽🏎️🏎️🚗🚗🚘🚘🚓🚓🚔🚔🆎🅾️🅰️🅱️🎸🤡🍦👅🚐

The hardcore sounds more like an overdrive, the blumes sounds like a fuzz cos of all the low end that comes through

Different LEDs make different sound? Now I want to make one with 3 LEDs and a 3-way switch.

I have this exact guitar. I bought it for 300. Barn find that still had all of the paperwork. It was bought and never played. It’s my very favorite guitar. Extremely well made and is crazy versatile. I won’t ever sell it.

Just got an 03 off ebay. Pawned mine years ago. 100% complete with original hard case. I am excited.

Speaking of fuzz face... 😁 Haha! Great vid dude x

Great video dude!!

Thanks for stopping by, here to help with questions if I can. Cheers.

Nice perfomance, nice shooting, overall nice!

Fantastic tone 🔥

That bass looks so sick! Great cover.

Vintage

does this work for an electric bass?

Demo for about 1 minute without really demoing anything and then flap your gums for over 5 minutes. Great job 👏👍👍👍

Note that the "front end" of the EHX/JHS "Lizard Queen" pedal IS a Bazzfuss. It feeds a Tim Escobedo Push-Me-Pull-You octave circuit. The stock Lizard Queen connects them directly, but it is a relatively simple matter to wire up a toggle that bypasses the octaving part and takes the Bazzfuss part directly to the volume control.

That sounds freakin awesome! What components did you have to swap to get the silicon trannies to work properly?

This youtube poster's experience was different than mine. I just got one May 20, 2024 and there is nothing wrong with it. I went over everything and it's in perfect factory condition. Double boxed, packed really well, no complaints at all. Other than the round wounds it came with that is. Gonna get La Bella flats 2nite.

Dude, you're gold! Thank you)

That almost sounds like the Crossover DRI album.

scratchy bass, doom it

strange, this tone sounds similar to a General Fuzz from Outlaw Effects. But using a silicon transistor, there is gaping in the clips like a germanium transistor. Rockon

When I first got my ME50 about 20 years ago (actually 20 years ago this week 😳), I remember a lot of people saying the thing sucked.😕 Now, every time I turn around, people are talking about how awesome it is. Took me until just a couple years ago when I got more serious with my playing that I realized how good it sounds. 😎

Hi mate... I'm thinking of making a pedal.. Where in the UK can we get the parts from?

Looks easy and efficient, thanks for the upload. How does the *R1 (10k)* influence the sound? ( I mean, if I _change the value,_ how will the sound be _different?_ ) Same question about *C1* and *C3.*

Found this kind of confusing. I see the in. Where's the out?

Thanks for the hug mate.

The new TurboRODENT will be here soon with a facelift and a toggle for the filter rather than the Ruetz mod.

thank you for playing metal on a bass thats designed for playing metal 🙏

nice, this could be my first vero build, thanks for the vid!

i have the parts set aside for the pedalpcb board, just ordered it today. hope it comes out well!

Just want to tell you that I have a great day indeed.