![Travis Hess](/img/default-banner.jpg)
- 17
- 139 699
Travis Hess
Приєднався 9 сер 2013
Outdoor and Motorsports enthusiast. Here you will find trip and build documentaries and honest reviews of today’s and tomorrow’s innovative products.
1995 F150 OBS Luxury Prerunner Build Plan
Let’s dive into the plans for the, new to me, 1995 F150.
Переглядів: 1 317
Відео
Ultimate Diesel Truck ??? Carli Dominator Kit Install 2020 Ram 2500
Переглядів 5 тис.3 роки тому
Probably the baddest suspension kit on the market for any full size truck. In this video we will dive into not only the intensive install of this kit but also the functionality with the VP of the company. This truck is fully spec with every option Carli has and the shocks are custom valved 3.0 Kings with stainless steel shafts.
Cutting into my 2020 Ram 2500 to install some AEV products
Переглядів 15 тис.3 роки тому
It was bound to happen, I tend to do this to all my builds. This time we install some AEV Highmark Fenders at my friends shop, Kalil Fab. He is my go to for most of my fab work and when I want to add some prerunner flare to one of the trucks. From my knowledge this was the first 5th gen Ram to get these fenders installed/
Decked USA Tool box First Look and Install.
Переглядів 8 тис.3 роки тому
Introducing Decked USA new product, a modernized truck Tool Box. Gone are the days of the heavy, sometimes rusted, ancient boxes you keep in the back. Stoked to have gotten my hands on one the past few months and put it through its paces. I must say I'm thoroughly impressed with the fit and finish and overall use you can get out of it. Let's get to installing.
2021 Kawasaki KX450 Makeover
Переглядів 1,4 тис.3 роки тому
Installation of a complete kit from Acerbis and fresh one off kit from SKDA. Hope y'all Enjoy. Huge thanks to Acerbis and SKDA for the continued support throughout the builds. Let me know your thoughts below
Baja Design Install and Rugged Radio Install on 2020 Ram 2500
Переглядів 2,1 тис.3 роки тому
Today we are diving into an install of Baja Design Lights and the brand new digital radio from Rugged Radios. All the wiring on my truck is always handled by my friend Greg at Wired by Greg as his work is impeccable. If you're in the market, hit him up on IG @wiredbygreg Thanks for Watching and please don't forget to like, comment and subscribe
Too Tech Race Suspension on 2021 Kawasaki KX450
Переглядів 10 тис.3 роки тому
Welcome back to the channel, before we dive into what we are doing, I would greatly appreciate it if y'all comment your thoughts below, subscribe to the channel for more videos about to drop, and ring that bell. Today we are going to dive into the suspension on my 2021 KX450. Most of you may know, but some of you won't, the 21 KX450 is many peoples choice for bike of the year with the slight re...
A Visit to Banks Power to install the Pedal Monster and iDash Super Gauge
Переглядів 69 тис.3 роки тому
Time to install a Banks Pedal Monster and iDash into my 2020 Ram 2500. Notoriously these trucks have significant lag in pedal response. However, Banks Power has come out with a unit that works with most vehicles on the market that is safe to use and does not mess with your ECM. So lets get into the specifics on how this module and monitoring unit can help improve your vehicles throttle response...
What is Ceramic Paint Treatment? Is it worth it? Lets share a wealth of knowledge from Shine Supply
Переглядів 3,3 тис.3 роки тому
With many pondering what ceramic treatment is and what it does, I decided to film my latest project getting treated at Shine Supply. They have done a few of my vehicles both personal and work and their attention to detail, and passion for what the do and create, is exceptional. I appreciate those that will watch the entire video, for by the end of it, you will be able to take care of your vehic...
Suspension, Wheels, Tires and more for the 2020 RAM 2500 Build
Переглядів 6 тис.3 роки тому
On this episode we stop by places like Camburg Racing, CJC Offroad, Innov8 Racing and others to pickup some parts to begin the process of building out this 2020 RAM 2500.
2nd Gen Raptor Lighting Upgrade, 3rd Brake Light, Race Radio, Forged Wheels and Ceramic Tint
Переглядів 1,5 тис.4 роки тому
In this video we will be making a few stops and completing a few installs. First, we head to Tint Pros in Huntington Beach, CA. We will be finishing up the complete ceramic tint package. From there we will head over to finish up the wiring of my Bulletproof Diesel 3rd brake light mount with dual NMO and Rigid Industries A Series. We will also be cleaning the wiring up for my Rugged Race Radio R...
Rigid Industries LED Lights Install and Wiring on Raptor / Quick Visit to Adventure Expo - VLOG #6
Переглядів 2,5 тис.4 роки тому
Back at it with Vlog #6 and today I am sharing the installation of my Rigid Industries lighting with @wiredbygreg and then we make a quick visit to the Adventure Expo in Orange County. See photos over at @travishess_ (IG) Lights installed (Rigid Industries): A Pillar: 360 series 6in., Drive Pattern, Amber Backlight Fog Lights: 360 series 4in., Drive/Spot/Spot, Amber backlight Lower Grill: 4x D ...
Its Wrapping Time with Beyond Wraps - Vlog 5
Переглядів 6364 роки тому
Welcome back to the channel and today, we pay a visit to my friend Marvin at Beyond Wraps. With this build, I contemplated wrapping the entire truck as I did my previous builds however, with it getting ceramic treated, I just went with some Satin Black accents. I think it turned out great. Definitely one of the more comedic videos I have put up. Dont forget, for daily updates, visit my IG: @tra...
VLOG #4 - ALMOST FINISHED IT - Rigid Industries Lights and FMF Racing
Переглядів 4684 роки тому
Hey y’all and welcome back for Vlog #4. Last Friday I had the day off and thought what better way to spend it then to start installing some long overdue parts, not only for my Gen 2 Raptor but also, my ‘19 KTM 350SXF. Huge thanks to Jerry over at Camburg Racing and D over at FMF for squaring the bike away and to Rigid Industries and SDHQ for the continued support the past few years. If you’re i...
Tech Savy with Scosche, Wrenching with Rigd, Arrowhead Weekend - Vlog 3
Переглядів 5404 роки тому
And we are back, first trip in the Raptor outside of bringing it home from Ohio and it was awesome. Along the way we made a stop to our friend Tucker over at Scosche, turned one wrench at Rigd Supply and off we went for 4 days in Lake Arrowhead. Like what you see? Don’t forget to Like, Comment and Subscribe. That little bell thingy will let y’all know when a new video is up. We have some good o...
HOW TO: Quick Detail with Shine Supply on my new Ford Raptor
Переглядів 5 тис.4 роки тому
HOW TO: Quick Detail with Shine Supply on my new Ford Raptor
I SOLD MY $100,000 LONG TRAVEL TOYOTA TUNDRA
Переглядів 7 тис.4 роки тому
I SOLD MY $100,000 LONG TRAVEL TOYOTA TUNDRA
where's the shop at in in canyon lake ca.. I saw after you visited Carli direct .. would like kody to install my fenders if he can
A few years ago I bought the AEV front bumper with the side pieces that are made to go with the high mark flares, knowing I would eventually buy them. The contour of the AEV bumper is very close to that of a stock bumper (4th Gen) so I cut the end pieces off a stock bumper welded some tabs and powder coated them so they fill the space until the flares get installed. It actually looks better than the stock AEV non high mark bumper ends, inner factory plastic ties into it nicely looks factory. I have some pics on my instagram page.
Still like it?
good video, just picked up a 2021 with 6 hours, can't wait for spring.
Dan the man! 🤘
I normally don't drive my truck much but my brother installed one in my truck the other day and now I just want to drive my truck. It's like having a new toy. Incredible product
How about a 05 Dodge 3500 , what you got ?
I have a white 4th gen that I want to do this to so it’s neat to at least get an idea of what it would look like.
How did those generals work out for you? I wanted them but I ended up going with Mickey Thomsons..
I want to add this to my 2018 Cummins 6.7 that has a Raceme tuner. Can i have both plugged into my ODB II port without having issues with both plugged in at the same time?
Wish someone made a fiberglass fender option like they do for IFS long travel
Why not start with a 15 year old ram with rusty fenders that you wouldn't worry about cutting into?
Can you run this with a banks tuner too
Tools needed to install banks paddle monster
I took mine off before going to the dealership and it left nothing behind im actually really impressed on how well this works. The throttle response is amazing!!!!!!
Just ordered mine today for my ram 1500 that has the v6. I just wanted to know does this have any effect on transmission wear at all as this will definitely be engaged at all times lol.
Great info! I have the ‘22 kx450x and want to set the sag. But wondering is there A specific size hook wrench. The owners manual gives a part number but I can’t seem to find it. Thanks in advance 👍
no check engine light?
I got one but must have instalked wrong no.power to unit no lights
I’m sold lol
Must reduce mpg
I installed it on my 2019 Ram 6.4 and it's amazing, I just stay in city mode, the pedal lag is not gone and the truck responds quickly once it's moving. From a dead stop and pushing the peddle to 1st movement lag is not going away, but it zips through gears quicker and more snappy.
I thought the box came wit tiedowns on the bottom
Ram Runner on roids! Very nice set up.
Great looking truck and video. I love the thumbnail but would love to see exterior pictures and know more about the suspension and wheel/tire combo.
Track mode. Who takes a ram 2500 6.7 to the track. Is this component hard on the transmission.
Those 39’s look like 33s under those wheel openings
I INSTALL THE PEDAL Monster on my Ramm 3500 HO,( single wheel ) pedal works good in all Stages,But I got the Service pedal light and the check engine lights, any sugestion?
Any update on how you fixed it?
Hello guys, great video again! Which wheels and tires should i get for my ram 2500, 2014? Method 17 and open country R/T or Method 18 and Nitto Ridge rapler? Thanks guy
man, for $800, you would think they could at least assemble the accessory toolbox for you....that sucks, looks like that box doesn't sit flush with the bed rails...
Toolbox already came off 😂
This chap is awesome 👏
Great video Travis, I personally don't see why for all the dislikes, they must have been aggravated when they watched the video or something. The video is of great quality but maybe those people wanted some more talk about the toolbox itself.
Very much appreciated. Did my best at the time.
i own a 2021 kx 450 too , had her for 11 months already , beautiful machines haha , what color coupler are you running ? im running the white coupler .
My only problem with this product. I NEED 3!!! 19Miata/20Grand Cherokee5.7/20Ram6.7
Hey bro, by any chance do you still have the flares?
Hey bro, by any chance do you still have the oem flares?
I’m sold.
Thanks another item to spend money on for my new to me truck... excellent vid
Did you put the 40s on after?
Bought my Ram 2500 Laramie Diesel in February, Did notice the big lag towing my 5th wheel. my neighbor showed off his in a 2021 3500 Big Horn, Absolutely impressed then, more impressed now. Thanks, You just got me off the fence and mine is on order today, Great review !
Were those holes already there when you removed the factory fender flare? I’m wanting to just delete mine but worried if it’ll leave those holes on there
Hi, I have a 2020 Ram 2500 mega cab, leveled on 37’s and interested in buying the pedal monster. It’s been 10 months since you have installed yours. Any issues? Check engine lights? Or just any issues at all? fuel economy? Thanks for your time! Fred
A candle that burn twice as bright burns half as long
Mine will be here today. Do you not have to disconnect the negative battery before installing as I've seen in other videos?
I have one for my 2020 charger; however I may not install it because he said something that made me cringe. Using more fuel 😩
I just installed mine. And works great BUT NOW MY CAMERAS AREN'T WORKING 😡 WHAT CAN I DO??
I need a OBD II power strip with all these plug in gadgets
And it is proudly made in the USA...