Відео

I'm 6'1 280 lb I'm a big guy I have a 2009 Chevy Impala I just fixed this exact problem no noise but no heat on the driver side so yes it took me half the day and I had to have my son help me put it back together cuz I was getting frustrated cuz I couldn't get my fingers in there the only difference is I didn't use pliers to adjust that white part I just stuck in the unit and just Twisted it until it fit into the matching bolts and it works fine blows out hot air now and I got them two of them off of Amazon for 20 bucks so basically there are 10 bucks a piece and there's actually three of them all together one on the driver side and two on the passenger side so now I have an extra one the passenger side would only take 20 minutes so much easier

Thank you for this video. Like you said, all the videos on here are about the clicking noises, and I don't have any noise. I have no heat like you, but I don't have dual-zone. So I'm wondering if that same actuator is my problem or if it's in the HVAC control module.

Cool! Exact model match! Th'ankhs

DEEP SHAME on GM.And the Stealerships want way too much to repair.

Took me 2 hours. But honestly could’ve took me 20min. It’s just so cramped that it’s hard to work your hands in it.

11 dollars amazon and no resetting not 4 hours

I've got an 06 SS, and I gotta slide the temp blend adjusters up and down about a billion times to get my heat to work for both sides. I'm assuming your fix is what I'm gonna need to do. THANK YOU! GREAT VID👍👍👍👍

my blows cold air on the driver side and heat on passenger side how do I fix that ?

I was glad to stumble on to your video as I got the cold air blowing on my balls only problem. I also had the clicking in the glove box twice. Each time I disconnected the clicking ones wires with a flat head screw driver and finally replaced em today. It was a bitch for my meaty hands to fit in the tiny spots. You're right. You gonna need that magnet. I taped the screws on to the socket and removed it as I screwed em in. Next week I'ma do the one on the driver side and the blower motor. If that don't fix all the problems I'ma just use the car for target practice.

is this the same for malibue 2013?

Mines make clicking noise and doesn’t blow any cold air

THANK YOU SIR!!! This is the video I needed. my doors were not clicking but not heat on drivers side.

I turn the heat on it blows cold air not good at all.

Buy ac delco parts don't buy auto part places they work for about 3 months 👍

too much talking. Get on with it.

Dang Man just do it already and stop talking so much

Chevy dealer wants to charge me 849.00 😮😮

Bought one at auto zone but in the future I will be buying Ebay

The dealership overcharged you for real. That part is $13 $14 dollars, I’ve replace all 3 of my actuators myself.

Pat what if both side blows cold air?

You really don't know shit about this

I'm a 57 year old lady and you are right it took me about 2 1/2 hours to fix mine the right tools are everything .....

Dang and you was worried about your editing skills? ❤️ The video

Dope!

Same problem 2011 impala

I've seen a few videos on UA-cam about how to replace the door actuator on Chevrolet Impalas. I replaced the one on the driver side but it didn't fix the problem. That was last summer because I was getting cold air only from the passenger side. Now that's winter the passenger side blows cold air only and the driver side blows hot air. I don't know what to do and taking it to the dealership is out of the question.

Awesome perspective on the problem. You debunked and debugged and demystified the process. Thumbs up.

Same problem here, so does this problem also drain life from your battery because it's an electrical issue

Smh my 2012 impala doing that now. It’s on my passenger side that’s blowing air and mine WAS NOT making a clicking noise either.

I've changed the pass side actuator 2 times now it's clicking again but I actual watched it work and it's opening the door all the way and it closes the door but when it closes the door it never stops that's when it starts clicking as door can't rotate more because it's closed but actuator doesn't seem to recognize it's closed so it keeps on going slipping on the gears causing the clicking .is it out of timing or a limit switch not working that I'm unaware of or control module bad ? Idk please some one help it's a 2013 Impala of course

Lmao I'm 6'4 I had the same problem

What if the driver side stays cold and the passenger stays warm no matter what you do (ex. driver side will not get warm and passenger will not get cold)? Side note: Have already replaced the passenger side because of the clicking noise

I'd welcome a car that only blows cold air down here in hot are louisiana rather than the insane inducing clicking noise! Count yourself lucky brotha.

Where is located if you don’t have dont have “driver an passenger “ it just the basic one?

So my 2012 is blow hot air on my driver's side but blowing cold air on the passenger side. Also in the summer time my driver's side would blow hot air , while the passenger side would blow cold air. Can you help me please?

The AC DELCO brand is from China.Autozone Dorman 35.00 JUNK.Found them online that work for 15.00 lifetime warranty.

Never busying a chevy ever again, this is the junk you get!

Replaced both these parts in my 2010 Impala. That irritating clicking. Those actuators are garbage. Go on line and look and basically everyone has had an impala has replaced them. Then they charge a fortune and the one on the drivers side is impossible to reach. Chevy should have to pay for this. Exactly why I'll never buy another Chevy. Mines a 2010 with 98k Two tire sensors replaced, passengers airbag sensor blinking now, ignition recall, traction control malfunction recall. They are throwing these cars together with junk Chinese parts.

Part made in china. Chevy the new chinese brand.

Good job very helpful

I changed the one on the driver side today on my 09 impala but now it won't start? Battery is good but the starter doesn't turn..

This is a piss poor part. I have already replaced all three on my 2014 Impala. Thank goodness the part is only $11.60 on E Bay.

2011 Impala. Same problem on both sides. Last Chevrolet. EVER.

What’s wrong if it blows warm air but want get hot

piece of shit chevy..i'm on my 3rd acutuator lucky for me that there are videos on you tube to fix em'. Screw Mr; Goodwrench!!!!

I have the same problem with my 2008 impala, but I have two problems the driver side blows nothing but cold air when I have it on heat. And it has the loud clicking sound. Would I have to purchase two actuators? Or can I just buy one?

I have the EXACT same issue except mine is the other side (blows warm air on the drivers side and cold on the passenger side)...........after owning the car for a month and just ignoring it for now (It was summer and I really wasn't using the heat anyways)..........I FINALLY got the ticking noise to go along with having no heat on the passenger side. The ticking is coming from the same actuator you changed in this video. I was originally thinking maybe my passenger side actuator was bad (maybe both are?) but now that it's ticking I'm going to go ahead and replace the drivers side actuator tonight and cross my fingers that not only does the ticking stop, but the car with actually have heat on both sides!!! I know for a fact it is the drivers side that was ticking because I listened to where it was coming from, then was able to put my fingers on it and felt the ticking, which i then just unplugged for now because i didn't have the $ to buy the actuator. Once unplugged it No longer ticks and i no longer have heat at all. I'll let you know once I replace it tonight if it fixes the lack of heat on the passenger side. (Which I do not think it will.....I have a feeling one of the passenger side actuators is also bad)

so that means is the actuator?

I have exactly the same problem on my impala, doesn't make any noise just blows cold air

2008 impala makes hvac clicking sound but its not the two located behind the glove box. Is there a third one located near the center of the dash?