Відео

@@mancmackem nothing I can think of if I’m honest mate I’d take a little look and see if you can see broken wires I’m the door panel it’s so common on these

​@@6uiltdifferent​@6uiltdifferent thanks! Final question, should the passenger side make a sound like the drivers side when you lock the doors via key fob or by pushing the handle in from inside the car?

@@mancmackem no worries and I’m pretty sure it shouldn’t I’d have to double check only the drivers side would lock all doors when pressed etc

@@andrewt885 yeah should be fine mate as they fit on the standard runners you just can’t go as far back with them compared to having no bulkhead

@@someone8476 no need to be sorry always happy to help no matter how old the video is 🙂. They was fitted wrong on this video I noticed after I uploaded it and changed it follow how the manual says and you should be good mate

@@6uiltdifferent thanks mate, I've fitted them and do quite like them. I wished did sprayed the brackets white before fitting as they would've blended in that way but ah well. Any suggestions for getting the bonnet lined up perfectly afterwards? The bonnet panel gaps aslre a tad worse amd it's starting to bother me ahahah.

@@someone8476 I wish I did the same it’ll definitely be on the cards when I get the car sprayed for sure as for bonnet gaps it’s a case of trial and error unfortunately loosen it off adjust resecure check and try again

@@6uiltdifferent OK, I'll live it a go tommorow hopefully. A day off as I'll be there all day probably attempting it

@@mateuszt4460 still need to do configuration better be be safe rather than skip steps

​@@6uiltdifferent Ok, thank you!

@@mateuszt4460 no problem all the best

@@rajsingh_king hi mate I’m pretty sure I had android Audio on it but it never seemed to work right if I recall correctly it’s been a while since I had removed this radio and changed to another head unit

@@6uiltdifferent oh okay cool! How's your new head unit bro? Any good? I can't seem to find an updated video on your channel

@@rajsingh_king it’s not bad just running a jvc one and no I didn’t film it life was a bit tough back then and was taking a break from doing the videos but we’re back

@@TheSubpremeState if that’s what’s causing the light then yes

@@ArntOveMelby touran 2003-2020, as for the electric side I’m not sure as we haven’t done this might have to be a case of trial and error on your part

@@norm4260 cost unfortunately where they can save money they will

@@CdotPoppy always ceramic coat if you can…. If not just stay on top of cleaning and use a ceramic foam to preserve etc

@@shadows4775 have you got an abs light on or scanned for codes?

@@6uiltdifferent no codes no abs light just handbrake light. It's mad .

@@shadows4775 very strange I’ll have a look at my setup and see what’s what as I haven’t really messed with it on the mk6

Check the wire that goes under the centre console and make sure it has a clean connection and make sure the wire has no breaks in it.

@@0luc83 unfortunately it all depends on what size spacers you’re running (if you’re running them) along side the shims if you’re not running axle spacers then I reckon the original bolts would be fine

@@6uiltdifferent Thank you for the reply, saw it a bit late :D I'm running 5mm spacers and am planning to stack 2 on each side for a little more camber, do the shims come in a pack of 2 or will I have to order 4 total? Thank you :p

@@0luc83 they come in a pack of 2 just be careful as it can knock the toe out and give you more issues so just get the car tracked after and make sure the toes still in check otherwise you’ll be munching through tyres like I did haha

@@6uiltdifferent okay thats cool, thanks for the info :)

@@0luc83 no worries

@@K999WLF yes mate

@@Natty.G92 hi mate they’re not bad could do with an amplifier though

@@Commo85 no dramas mate 😂😂😂

@@brandondenoven3119 vag can pro is around £30-40 Vcds is quite a bit more expensive unfortunately just google it and it should come up plenty of people selling kits

@@tonystreet3574 no video this week life takes over sometimes unfortunately and Parkin racing developments sells the bearings

@@6uiltdifferent thanks mate

@@tonystreet3574 no worries mate

@@RomanKolinek hi mate if you give us a message on Instagram I’ll give you a diagram for the relay box they’re located inside the car there’s 2 relays one to unfold and the other to fold the mirrors

@@runcycleskixc I defo wouldn’t 😂😂

@@slybunda no it’s a gas mig welder

@@owenbrown2322 self tapping screws

@@mykoijourney4979 yeah get an uprated one the one I purchased was 150Amp 🙂

@@6uiltdifferent that’s fantastic thanks for your help mate 👍

@@mykoijourney4979 no problem mate

@@paulmcdougal-fc8qp no worries mate 🙂👍🏻

@@leehiggins9690 thanks mate was definitely the right decision 👍🏻🙂

@@TheKittyRanch 100% and yeah I don’t want that happening so I made sure everything was correct or Atleast tried to 😂 👍🏻

@@CdotPoppy much better mate it’s very tame

Unfortunately there wasn’t a video on that as it was a bloody disaster getting all the right wiring etc however it’s all hidden behind the dash

@@callum3118 now running meister r and thanks mate 🙂👍🏻

@@tonystreet3574 I try sir glad it’ll be some help to you doing it this way will make a big difference too 🙂

​@@6uiltdifferentjust watched it again, what's the point of putting the car up on blocks?

@@tonystreet3574 you need the weight on the car to set the links up and to sit in the car or mimic the weight of yourself sitting in it so no tension is on the bar unless you’re cornering ie the bar can do it’s job properly 🙂

@@6uiltdifferent fuck it Ted, I'm coming to Surrey (joke)

@@tonystreet3574 😂😂

@@MrLordofthelions just type mk4 caddy tail lights and they’ll come up

@@norm4260 thanks mate and not a clue luckily I’ve just fitted new coilovers (didn’t film it as I’ve had a few teething issues with the car) however they wasn’t gonna be filmed anyway you’ll find out in the new year etc. getting to the point my new ones are a macpherson strut which means the springs built into the shock like the shock so I don’t need to worry about the brackets now 🙂

@@jefcharles thanks for your kind words the camera died at that point unfortunately and before I knew it there was no way I was getting that back off and on again I was covered in brake fluid not all videos have bits where they cut off the important bits I promise you that, but I can’t get it right everytime. As for ad revenue I get like £30 a month if I’m lucky so upgrading my equipment is a distant memory at the moment all I can say is if you want better videos where I have better equipment maybe share the video and get your friends to subscribe 🙂 ps we don’t have parts sponsors even though it’d be this is all funded by us thank you for your comment though I will take what you said on board

@@spammo3337 yes mate programming is including in this video 🙂

Thanks mate and not doing bad hope you’re well too

@@adamford2189 big ADAM

@@tonystreet3574 never is mate just take your time on the front strut bolts they’re a pain if they’ve never been out before you’ll be fine though

Nice 1 bud, plenty of WD!

@@tonystreet3574 try and opt for a product called plusgas it’s the king of seized parts bolts etc

@@blairmccormick4351 thanks mate much appreciated 🙂

@@Vredeopaard me too even though this car is stressing me at the moment haha hope you’re well mate 👊🏻

@@6uiltdifferent i am good mate thanks , yes somethimes it is stressing.

@@Vredeopaard good man and definitely haha

@@BaaarnnzBoyDiagnostics no problem at all sir be sure to subscribe 🙂👍🏻

@@6uiltdifferent just subscribed thanks once again look forward to more videos

@@BaaarnnzBoyDiagnostics appreciate that mate thank you 🙏🏻

@@SakibAhsanTamim-p1t go for it sir

@@carlalmquest7985 either way works however I find using that torx screwdriver works well it’s way smaller than a t30 maybe a t10 or something and yeah the chain holds tension until you crack off one of the cam pulleys so don’t be alarmed you’ll know when you’ve locked the tensioner back as you won’t be able to pull the screwdriver out unless you yank it hope this helps

@@carlalmquest7985 you can do stem seals with the head on by the way

⁠@@6uiltdifferentnice one, thanks mate. Yes have everything ready to go to do it in place with air compressor to hold the valves. Hopefully will go ok. Just the chain that I wasn’t 100% confident with, especially when you’re trying to do the tensioner blind 🤣. I have been trying a small flat head and was long and bendable, so plenty of length to reach in. Will see if I can find a longer torx like the one you had 👍

@@carlalmquest7985 no worries mate and good Atleast you’re not giving yourself extra work, it is a bit worrying at first but once you’ve done a couple you feel more confident .even if you have a long pick as the cosworth guide shows them using one of those so that may work for you aswell let us know how you get on 👍🏻

@@6uiltdifferent will do mate, thanks for the help. Much appreciated. Great videos by the way. Definitely helps a lot as you have seem to have done quite a few of the jobs I am wanting to do. Keeping mine completely standard but your guides still help a lot with the majority of it

@@huwdavies7503 no problem at all glad the video helped 🙂

The one thing which I’m struggling to understand is how the camchain adjuster is pushed back in and then retained? I see how you release it but not how you then push it back in under tension? Thanks.

@huwdavies7503 once the tensioner is released you rotate the engine backwards then place a locking pin in the engine all the steps are in the video trust me

@@16jack13 thanks mate and leaving it till I’m Able to get it painted a lot of people try to cover the rust but instead create a water trap for it and by the time you can see it it’s too late hence why mines just left as is

@@CdotPoppy yessir

Thanks Tony much appreciated mate and it’s a common one on these I’m pretty sure there’s a seal on the scuttle panel that goes bad I need to look into this myself as mine does the same however as you can tell most of my scuttle panel is missing as I removed it

@@6uiltdifferent nice 1 mate, im going to look at diy ing something!

@@tonystreet3574 just make sure it’s clipped in properly to the windscreen a lot of them Aren’t you’d be surprised

@@6uiltdifferent mine is not clipped down

@@tonystreet3574 that’ll be your issue