- 82
- 133 607
RainbowRC
Приєднався 15 лис 2008
Xmaxx too fast to bash now??
Just a quick bash session with my xmaxxs. The car is getting very very fast, but is still reliable and can take jumps and handle just fine. So enjoy the video and if you want to see me record things, let me know in the comments or whatever and tell me what you would like to see or see me do thanks 
Переглядів: 1 120
Відео
Traxxas XRT first run and bash
Переглядів 740Рік тому
Just a quick video of my brand new Traxxas XRT. The car is bone stock except for a 46 tooth spur gear. I also turned the reverse down to 50% and also turned the breaking down to 50%. Everything else is box stock and is doing very well. Soon I will have electronics coming for it to make it a lot faster and then it’s going to be a great car.
Bash session for my xmaxx…can we break it??
Переглядів 1382 роки тому
A little bash session for my truck. It’s been a while since I made a video but I am back and I’m going to see if I can start making videos again. So yeah I’m a little rusty recording videos but I will get better again and if you guys need anything or want me to do anything just let me know.
Back!! With a nice bash session and it feels good
Переглядів 3182 роки тому
So a quick little bass session with my xmaxx. So nothings changed I just put the stock tires back on the truck. In my opinion the factory tires tend to be the best all-around tire even though it isn’t the most durable tire. But anyway enjoy the video and let me know in the comments if you want me to do other cars or other upgrades to the cars.
Traxxas Xmaxx bash session and hopefully break it 😈
Переглядів 922 роки тому
Just a quick bash with my xmaxx since it’s been a few weeks since I made a video. Been busy with my partner so haven’t had much time to record. Family always comes first. Anyways here’s something a little shorter to get me back in rhythm of making vids. Thanks for watching guys and girls!!
Quick Xmaxx bash session after a few weeks off
Переглядів 1222 роки тому
So this is just a quick bash session on my xmaxx. Nothing fancy just a quick bash so I can get some videos going and get back in the rhythm of making videos. So my gearing has changed to 25-30 and it was 23-30. My spur shaft broke again which caused my pinion to break and I had to change out to a 25 tooth pinion. The gear that broke was a saga racing year which is the first time I’ve broken on...
GPM diff pinion test in the Traxxas Maxx
Переглядів 5392 роки тому
So this is a test of the GPM rear differential pinion. My stock pinion for my Maxx went out and I have been wanting to try the GPM pinion so we’re gonna see how it does and if it will last with my bashing ways lol. First test seems to be very good and promising. 
Traxxas Xmaxx testing heavy tires and hot temperatures
Переглядів 7102 роки тому
Quick little bash session of my XMaxx and heavier tires. So right now in Louisiana it is early spring so it’s about 90° outside and I wanna see how all my fans are doing in the heat. The Lucid fans that I’m running I got during the beginning of fall so temperatures were in the 80s at the most. As always the fans are on receiver power so the most I get is 6v or whatever the receiver puts out as ...
Traxxas Xmaxx bash session with stock tires and lots of power?? Let’s see if they hold up
Переглядів 8142 роки тому
Quick video and bash session of my xmaxx. Some guys say the stock tire for that truck is trash and I’m here to say they are not trash. The stock X max tires are really good tires they just need to be vented. Once they are vented then they last as long as any other tire 
Traxxas Maxx fixed ESC problems??
Переглядів 1,5 тис.2 роки тому
So I’m running my Traxxas Maxx today. Yesterday I was having some problems with my ESC cutting out and I believe I might’ve fixed it. It does appear to be doing the problem still but not anywhere near as bad. So I think what happened was I had a loose wire on my motor wire causing the ESC to freak out and turn off. It did do that one time in this video but it wasn’t doing it anywhere near as mu...
Traxxas XMaxx bash session with nothing broken lol
Переглядів 1 тис.2 роки тому
Just a little by a session with my Tra X Max. The truck is finally repaired fully. The front differential and the CV Drive cups are all brand new. I did have a problem with my spur shaft from it breaking but the company warranted the shaft and gave me an extra one. So we’re going to see if we can break it again hopefully we can pick the truck up without it being broken. Also there was a guy tha...
Traxxas Maxx bash session
Переглядів 6922 роки тому
So today I decided to run the maxx for a little bit. My motor fan wire has come loose so I can’t run it too long but I had a guy in my other video said that he wanted to see the maxx running so here’s a good video of it running. It’s going pretty well it’s been really good the max is a good truck but I wanna take it easy this time because I don’t have a fan on it. I have a fan coming it just ta...
Traxxas X Maxx bash with new body finally
Переглядів 7952 роки тому
All right guys so here’s a little bash session of my xmaxx with a new body. As you guys know if you watch this channel often, I needed a body halfway bad and I finally got one. This body is the solar flare body and it’s been done with drywall tape and shoe goo. Also I trimmed the rear of the body off to see if I can prolong the body breaking. So on my last body, the rear of the body started bre...
PR Racing gears test on the Traxxas X Maxx
Переглядів 6172 роки тому
So here is another video of me running the PR racing gears. So as of right now they have about 10 runs on them and they are doing very well. So after 10 runs they have almost no wear and are doing a lot better than other brands. I am not being paid nor am I sponsored to say things and if they break they break and I’ll let you know. But the truck did break again lol. I broke another CV axle and ...
Traxxas X Maxx test of the PR Racing mod 1.5 gears
Переглядів 2,6 тис.2 роки тому
So here is a quick product review and test of a new set of mod 1.5 gears for my xmaxxs. It is a company out of the Netherlands and I want to test those out on my truck to see how durable they are. They appear to be very well-made and come with a brand new spur shaft but it does take a few weeks to get the product. They are €115 but I ended up paying like one $125. I’m broke the X max in this t...
Traxxas Maxx bash session…can we break it?? Idk
Переглядів 1,1 тис.2 роки тому
Traxxas Maxx bash session…can we break it?? Idk
Bow House RC spur shaft for the Traxxas Xmaxx
Переглядів 1,5 тис.2 роки тому
Bow House RC spur shaft for the Traxxas Xmaxx
Proline Mx57 mod that makes them so much better!!!
Переглядів 2,2 тис.2 роки тому
Proline Mx57 mod that makes them so much better!!!
How to put connectors on any lipo battery plus general tips
Переглядів 2372 роки тому
How to put connectors on any lipo battery plus general tips
New Proline Mx57 badlands first test on the Traxxas Xmaxx
Переглядів 7 тис.3 роки тому
New Proline Mx57 badlands first test on the Traxxas Xmaxx
Traxxas Maxx VG Racing springs test
Переглядів 3,3 тис.3 роки тому
Traxxas Maxx VG Racing springs test
Traxxas Revo with SH .28 nitro engine first fire up
Переглядів 5873 роки тому
Traxxas Revo with SH .28 nitro engine first fire up
Traxxas Xmaxx testing madmax land rippers and new gearing
Переглядів 8983 роки тому
Traxxas Xmaxx testing madmax land rippers and new gearing
😂 i put my body one backwards once and thought my settings got flipped to reverse
what about xmaxx tires
I never understood and still dont understand why companies make such ugly wheels. The xrt wheels are ridiculously ugly. Proline had nice looking desperado wheels then went to the raid wheels which are ugly. The mx43 prolines are crazy ugly.
Yea I agree I don’t love prolines wheels and yea the desperato wheels did look the best but they were 3.8 wheels
I think it may have been running out of fuel. Dbl check the tanks not dry before you riches the low needle. It did not sound lean to me not at all.
Yup it could use a very small and I think small leaning out on both needles and lower the idle a bit. It does sound sweet though. 👊😎
Nitro engines don’t like to stay rich it causes to much tension on the rear bearing and crank up to the piston. Make that guy scream and open up bro. It will last a lot longer in the long run.
There is such a massive amount of more low torque in that engine. Depending on your idle gap which I bet is still 1 mm It sounds like it’s set 1 or 2 hours rich in the low needle. And the idle gap may still be around factory setting
You put some great Proline Badlands on the Jato to get some grip off-road. Well done! I’m thinking to do the same, but not sure what wheels to buy because the jato chassis is not the easiest to fit wheels. Which wheels did you mount the badlands to? Thanks
You need the proline brute basher body!!
Do you know what is the different between Pro line badlands mx57 pro10198-11 and Pro line badlands mx57 PRO10198-10 ? Which one has a belt and better? Because it is different only number.
One is probably for a 24mm hub like for an arrma and one is probably 17mm hub. Unless they came out with a tire overnight then neither are belted. You want to stay away from belted tires anyway unless you are going for speed records. Bashing should never use belted
Do you know what is the different between Pro line badlands mx57 pro10198-11 and Pro line badlands mx57 PRO10198-10 ? Which one has a belt and better? Because it is different only number.
Have you has any diff or drive train issue running the 3.8s did the orginal arrma wheels have a narrower offset?
Appreciate the video
Badass! I was just looking at those wheels earlier at the hobby shop they look really good
What are they if u don’t mind can u send me a link to them?
Wait, 2 batteries!? How in the world? I’ve never seen that.
So since you got it stock out box, how much has it cost you to get it to where it is now?
Will it still do easy backflips?
Ehh yea and no. It will but it wasn’t as easy as the regular mx38s if I’m being honest. After these I never ran belted tires again bc I just don’t love them. They look cool but I went back to non belted
@@Hittin2thabass I think you're right, I watched a video after yours and he was doing standing backflips on regular mx38, and on dirt, no less! I just put fling kings on my erevo and like them a lot, first upgrade after 3 sets of factory tires. I will get mx38 also...
Nice tires. When you said you are using loctite, do you mean using loctite on your wheel nut hubs so the tire doesn't come off so easily?
Yea I added loctite to the screws that go into the replaceable plastic hub. I wanted something that would hold better than nothing but not be super glue tight bc I have lost screws in the past on those hubs
@@Hittin2thabass From what I understand, loctite is not designed to be used in plastic parts. That's why I never do that 🤔
246g original Badlands 392g Stock e-revo 2.0 456g Non-belted badlands 418g Belted badlands (new MX38)
Man thank you for explaining the tie rods. Had my knuckles on wrong which I knew but when I got them off I forgot which one was which again and put them back on wrong once again before I saw your video
Oh dude you’re very welcome. ThTs why I do these vids to help people out. I’m glad I got you fixed up in a sense lol I sold my 2.0 but I need to get another one. I thought the xrt would be like a big 2.0 and it’s not. I miss my 2.0
Xmaxx rolls over again take two.
Do you have 10mm hex extensions on?
Are you running hex extensions
Can you confirm the tp 5660 (1550kv) motor or put a link for the upgrades! Pls
1100kv,20/35 mod 1.5 ..Best for bashing
Nah 25/35 with the 1100kv I got that in mine it’s stupid quick!!!!Also does anybody know of any fan mounts that fit on an xrt with an 1100kv? I also have the m2c mountzilla motor mount and I’ve been looking for something for a while now for cooling but can’t find anything, please someone help
What fluidd do you have in your centre diff
Of course... it's not stock to the XRT
The xmaxx is stock suspension wise
Be nice. I’ve had mine for many moons. Upgrades also. It flys like a Thunderbird
Nice.... just build kraton exb 8s with castle creation xlx2 1100kv combo 39/39 ⚙️ it's stupid fast 😳
Nice looking maxx. I like the white body
Driving on a track is so much different especially with a bigger RC. It's one thing to hit one ramp in the middle of an open field. It's another thing to connect jumps sequentially. Just saying. It takes time and definitely takes money. Until you learn to track.
i have the red XRT and its awesome great video
Oh yea it’s a good truck for sure
It is very important that the Castle XLX2 Controller fan runs continuously like Hobbywing!, I already burned out a Castle, never again Castle, I now drive Max 5 with 2x 40mm fans.....Best Greats from Austria/Falco....
Mine don’t really run all the time bc I don’t have mine geared that high
why did you switch from Hobbywing Max 5 to Castle ?
Bc it’s faster
Center Diff Spool ?
No I have ear plugs in the center diff
Can you still backflip like you did with the non belted/stock tires? And do you have any other gearing other than stock on there?
Yea I can but it’s not like the unbelted ones and iirc I had 18/52 on the e revo. I sadly sold it and I regret it but I ended up getting an xmaxx but still I miss my e revo
@@Hittin2thabass oh ok so you still can but you need to change the gearing a bit?
Great video. Are you running two 3S batteries? I’m new to RC trucks. I’ve never seen this before. Why?
Bc you double the voltage going to the esc so it’s faster
Because 6s is sick af!! Vg springs for the win!
Nice job!
Thanks
HELLO THERE RAINBOW RC WILL THIS MX38 WORK ON TRAXXAS WIDE MAXX V2 STOCK GEARING ?????
Did you feel like the compound is to hard on the belted tire? I bought the belted trenchers and felt like the compound of the tread was so hard they actually felt slick in the grass vs my original trenchers. Just curious if anyone else has felt this way?
Yea they are not as grippy as I would’ve thought
What gears are you running with them tires
I believe that’s 20/52 bc that’s what I ran on that truck for years
I just got this erevo 2.0 ain't got them tires just wondering if I could run the factor gears ?
Yea you can unless it’s a super big wheel and tire or something. Factory is 18-54 so I was running more speedier gears than factory and I had no issues with heat or something.
Are you still happy with this motor and is it overheating like the traxxas ones? Also what are the cooling fans you are using?
Yea the castle motors are really good and the fans are yea racing motor fan kit with their metal tornado fans
@@Hittin2thabass Is this motor suitable with the traxxas esc? And you are using the sensored motor right?
@@orhunturkdonmez4847 yes the 1515 series motor can be used with the stock esc and yes I have mine sensored since I run the esc and motor
orange looks sweet
Oh thanks and yea I like the orange too. The new body I have is the solar flare which looks good too imo
Mx43 much better than these tires Me my first run the tire fell off
That’s bc you need a better wheel nut to hold it on that has a 24mm adapter built in plus they are a lot lighter than the mx43s
@@Hittin2thabass im using them on dbxl
@@tamerabufarwa7531 uh ok you still need that adapter wheel but
Glad you back Bro and wish you the health of 1000 healthy Oxen’s 💯😎
any issues with these wheels cracking?
Nope have not had any problems
Lol, so simple, but good catch. Tires ballooning are simply more fun and better for bashing!
Are those the 4s lp tire or bigger 6s tire
That’s the 6s backflips and I’m still using those tires. They last forever seems like
@@Hittin2thabass cool I have a set gonna give em a try on mine 👍
R u running a stock servo?
Nope that’s a reefs raw 500 servo
This motor use roto start?
No that’s tiger drive roto start on the motor and a 7/32” hex drive on my drill. I took a 7/32 T handle Allen head and cut the T off so it’s a 12” long hex drive
You running a BEC for that Raw 500 servo ?
Nope just straight to the receiver