Відео

@@Worldpeace-su3qk good stuff

@@Worldpeace-su3qk thanks for the tips!

@@prestigepropertywashing I like watching your videos because you don’t cut out anything from your video roles . The only place you have to go is up more knowledge more experience, but make sure you tape electrical outlets and don’t let the SH light fixtures is gonna be a bad scene carrier fire extinguisher as well

@@Worldpeace-su3qk I appreciate that man. And all the tips. I’m very good at bagging, taping, and masking everything off now. Include everything I can to give people a real sense of what it can be like on a job.

@@Worldpeace-su3qk I flush it with water until fresh water comes out of my gun. I’m running 5/8 from tanks to proportioner to reel then have 300ft of 1/2 on. Had an issue(lack of pressure with my 5 orifice soap tip with 5/8 inch chem hose and when I switched to 1/2 inch it was fine.

@@riversidepressurewashing2024 door knocking, Facebook posts, neighborhood groups, local veteran gave me a few jobs to take care of for him that he couldn’t get to.

@@captlogic9621 long story short it was my 5/8th chem line on my reel. Had to swap it out and have 300’ of 1/2inch and it does just fine. It’s a remco issue.

@@prestigepropertywashingso the 5/8 was just a little too big for it? Runs good with the 1/2 now?

@@Under_PressureSW yes runs good with a half-inch chemical line. I definitely recommend checking out Christopher Runions video on the way he has his set up. He has the same pump and it looks like he has the best efficiency I’ve seen.

@@BuzzFlash63 💯

@@Farmalleric a county business tax receipt aka business license to operate in your area.

@prestigepropertywashing ok thanks I appericate it I was just curious I'm thinking about starting my own little gig so im just in the research phase right now I have a 5x8 trailer and two 55 gallon tanks

@@Farmalleric of course! Also good luck with your build!

@@Farmalleric what equipment do you want to go with on your set up?

@prestigepropertywashing I'm just looking to do soft washing I was looking at doing the 12v pump and the the mix valves to start then upgrade as I go. Don't wanna dump alot of money till I know I can do this full time hopefully then I'll invest in better equipment.

Generally, we don’t worry about the other side of the fence unless the homeowner of the fence specifically states they want it both sides cleaned. This cleaning mix was about 1 to 1.5%. Considering we watered before during, and after- it dilutes it way under one percent.(house hold bleach(not chlorine) is around 5-7% to give reference. I’ve never had any issues with it killing grass or discoloring it when watered properly. Behind this fence was an overgrown weeded asphalt driveway. Picket style fences do pose the concern for cleaner to drip down and leave streaks on the other side. Personally, I have not cleaned any wood picket fences but that would be a situation I would definitely discuss with the owner of the fence and maybe even the neighbor and let them know that that is a possibility. The neighbor may want their side to and could be willing to pay for it.

You are very welcome man! Thank you! Going to be positing more videos soon!

Thank you! Glad you liked it!

Thank you James!

He most likely does not trailer with water in it…I personally dump 90% of my water that filled into the tank at the end of the job.

I own a Pressure Washing business in Florida most of the Pressure Washing companies I know have a second pump on the truck for soft wash. The banjos and fittings don’t go bad that often and you do not need them on the truck. If you do regular maintenance on your downtime most people that are Pressure Washing will have O-rings for their quick connects so they can replace them on the job. Most Pressure Washing trucks usually only have one pressure washer especially if it’s an 8 gallon a minute my 3500 psi cold water with a clutch cost $6800 2 years ago.

Wonderful! Thank you for watching! Glad I could help

5/8 from water tank to proportioner 5/8 from Chem tank to proportioner 1/4 from surfactant tank to proportioner. 5/8 from proportioner to the pump. 5/8 from the pump to the reel 5/8 on the reel.

Okay, right on. Thank you for sharing.@@prestigepropertywashing

3500lbs

Editing 2 videos as we speak! Uploading sometime soon! Roof-house- and concrete wash 😅

Haha thank you. I try 🤣

I can get through around 400 sqft maybe 600 if use my blower to blow it off instead of rinsing it off prior to cleaning. I try to keep water coming in as I use it so I don’t have to worry about running low.

@@prestigepropertywashing thanks yes I do have the Hudson about halfway down my tank .

I’m glad you enjoyed the video! The hose label on the hose reads” flextral grip Loc j2-06 nonconductive 3/8” 300psi WP hose”

This is a 5x10 trailer

@@prestigepropertywashing thanks

I have a 4200psi but it’s 4gpm I have thought about upgrading to a 6 or 8 gpm. Are you happy with the 3500psi or would a higher psi be better?

@@davidkeeling5434 The PSI is perfect for everything I need it for. With a shooter tip I can get decent height also, 3-4 stories depending on wind. I definitely don't have any regrets with the 8. Rinsing is a breeze.

Hey do you mind if I reach out and have questions about the build I’m looking to do something similar I’m here in Tampa about 40 mins from you.

Thank you! I appreciate it!

Thank you! Anything else you might like to see?