Відео

How do you even turn the renegy core one on?

saw a review that model uses 3.9A at idle can you confirm or say the idle consumption of your unit? thanks

Damn, those look like a seriously thin gauge. Like paper thin. Id have gone with unistrut imstead. 12ga rails, 1/4" fittings. These thinga look like cheap chinese copies of unistrut/superstrut....

Thanks for the informative and well shot video. You're a cool dude!

Midnite stuff is like how USA made quality electronics used to be made basically industrial quality and professional stuff, love the company its attitude humble down to earth not afraid to have good customer service check the webinars learned alot

Hi great video. Inam wondering how to put PV first and A/C second. What i am looking to accomplish is when battery come low with PV. It would switch to A/C

How many cycles do you think they have done? And how are they used? Like what’s maximum amps pulled from them. How often do you let them sit fully charged or go flat? Thanks in advance.

When you finished the setup what was the angle that it came with?

I almost bought them but nobody showed how to change the angle so it must be a problem. Changing the angle is important for solar panels! Good video i enjoyed it. Maybe one showing changing the angles.

People love tech videos especially when you have long microscopic views of random peoples faces. Just sayin'

Thanks for runnig through the entire assembly....had bought the kit...and you've made the assembly quite clear....the panel mounting jig idea is something that I'll use.....east coast locale.

You are correct. Once you take off. Allow it to hover over the pad for a few seconds. Then leave. I land 99% of the time on the pad right in the middle. It does auto-correct as well. I love this drone. I use RTH when I'm in tight places like the beach ⛱️. I have my large heavy-duty pad and some cones. I set it next to my beach chair. People are always amazed when it lands perfectly on the pad. On my last visit to the beach, I was in the water lol 😆. Low battery and RTH activated lol 😢. I forgot I moved the pad a little before walking to the beach. But thankfully it still landed on the pad but one leg was off the pad. Which in the video kicked up dirt. Next time I'm going to make sure the pad is where I want it before taking off. That was on me. I realized it when I was watching the entire time from the water. I started to cancel and correct it. But I decided to allow it to do it's things. Anyways new subscriber I just sub to your page. Oh it can indeed land in tight spaces long as you LIKE you said allow it to recognize the pad first.

I have 8 400w panels currently 2 in series into combiner.so I'm using all 4 inputs. I just upgraded my controller to an all in one and it requires 120v to start with a max voltage of 500v. Without having to run all new wire, watching your video it looks like I might be able to put these eight panels in series within the combiner box. Is this correct? I know you just did two strings I have four so would that mean that the last fuse holder would be like the second that you have wired?

I couldn't of done it without this video that's for sure the actual manual is horrible

Nice clean setup. It's been my understanding that when paralleling, ALL cables should be of the same length (+ and - alike). Looks like you have shorter negative cables than the positive. Have I been misled?

I just ordered an eight hundred watt renergy system for my cabin. The wire from the charge controller to the inverter, is that just a regular battery cable connection?Type

How can you even reach 60amp charging from solar with the 100v /1500watt input limits?

When i put my inverter in use it saying sla?

They do have the 3000 watt version now!

Very good thanks for the help

What setting line on the inverter controls the cell over-voltage alert? I'm not finding that line description in my user manual. Thanks.

I needed to know what the blinking LED was indicating... and you explained it perfectly Thank you.

Finally the video we’ve been needing for a year!! Thank you.

How did you ground the eco worthy??

I’m concerned about running a refrigerator on a gfci

Thanks for the video. Can you jump start with a car battery? Or does it have to be with another LiFeP04?

Well done!

Any idea if this can balance 16 batteries in 4s4p (12 volt batteries)

Thank you Gary. This is a great video. Unfortunately my charger inverter is not a clone of the series you discuss but it is a copy (even uses the same case). Are you familiar with the PowMr brand? I have the 3.6kw model in 24v. (POW-LVM3.6M-24V) It uses the same kind of display and identical menu structure but many of the settings are different numbers and it does not seem to have as many set points as the one you are using. I am astounded that these manuals don't give more detail on the functional operation (when they bulk charge, when they float and when they boost etc) Your video was a huge help validating my decisions of max charge voltage, min battery voltage and so on but still lots of questions to resolve. I would really like to know ALOT more about the function of the internal BMS in the ECO batteries too. I have 4 of the 280AH in 2S2P. Is there any wifi or other interfaces to read the internals on these batteries? I found you in the FB group I am Tim McRae on FB

Hi, when i keep clicking through the menu i have a few setting that arent in the manual. I believe 39 and 40. One has option from 0-254(i think) what is this? And the other a selction of codes. Csn you help with these hidden setting that sre available to look at but not in the manual? So i know which to select

Hey there, so is the PV input voltage on the all in one display screen. Is that reading what the combined solar.panels are producing in volts? I hooked my four 250w panels up in series/parallel and my pv input reading is 58.0 volts coming into the inverter. The sticker on the back of each panel says 37.6 open current voltage. That seems off but im no expert. Man this stuff can get confusing

Hey Gary your setting 35 & 37 are the same should the 48v system not double in line with the others? Cheers

so i have the eco 5000 watt invertor - the same control screen you demoed. Thank you for that video. I have studied the manual and i cannot seem to find anything indication the number of watts my pv is producing. I see the number of volts which should be 19.8 x 12 = 238. It would be helpful to now the wattage since my panels are rated in watts. Same thing when i run my generator (i will ask you another question about that later). BTW, do you consult for a fee? I'm happy to pay you for your time. Thank you.

So the percentage on the controller isn’t correct since your 36% is actually 70% right?

I regret buying this shunt, it's been so unreliable, it refuses to talk to the One Core controller, keeps dropping off from DC Home, needs resetting on a daily basis I contacted Renogy support and was told it wont work with a non Renogy battery !!, then they said you can't use it as a standalone product and you have to buy a One Core panel to use it !!, these are both incorrect, as I pointed out in their own user manual it can be used with any brand of battery, I am using this in a second vehicle with a Li-Time as a standalone through DC Home and all it's been is trouble, latest is a red light flashing and can't find out why, there was a firmware update to One Core a few days ago and not it doesn't talk to One Core anymore, IMO don't waste your money on this it just going to cause you headaches.

i have a 48 volt lifpo system - all eco-worthy - 5000 watt invertor , 14.3 280 amp 4 battery, 2400 kw array and a invertor genertor which will be used manually when the fault indicates pv unavailable and batteries need to be charged. How important is a ground to earth?

Hey there again, here's my current situation, I'm getting a max charge of 26.8v from the three 250w panels in series. When I watch a movie and run the ceiling fan and small frig, the voltage reaches 25.0v or maybe a bit lower at bed time, then I run a regular fan over night my inverter will ring the alarm in the wee hours of the morning due to low voltage, thoughts on that? so with that said im going to try the 2s2p on my four 250w panels to see if i get a better responce. My question is now and i may have asked you this already but i want to run a generator sometimes to top off my batteries before i go to bed. So even if the inverter has not reached the #4 setpoint and i start the generator manually will it just automatically switch to that power source to top off the batteries? Or do i need to change #1 or #6 settings on the inverter for that to happen? I have #1 set on sbu and #6 set on oso.

Charge Controllers need Battery Power 1st to recognize Its 12 or 24 Volt and then enable Your Solar Panels. For proper operation.

I have bought 2 Renogy 1000 (Lycan and Pheonix) power boxes with issues, and repaired them, I can make 5 pots of coffee with them before the internal battery is dead 900w 14 minutes per pot, so when working properly they are pretty good

have you hooked to generator for main power yet? I cant get mine to work with generator it trips gfi on generator as soon as I plug it in

Can u measure how many amps certain size can handle

Gary is amazing, what a good man, had an issue with my inverter, emaied him, he caled me and fixed the issue over the phone. Anytime you want a gift certificate for dinner Gary, say the word, thank you

yeah ive herd that RENOGY is avoiding there customers i wonder why lol cant be that there products are junk

Hey its me again, so I have my #4 set at 21.6 and #5 set at 28.0. I have four 250w panels in series 1000w, and two 12.8 280wh in series. With that said when I turn the solar panel breaker on it show the red light and an error #9. Now when I take away one 250w panel to make 750w it works fine. #9 is set at 28.8.. I have no heavy loads right now. Any ideas?

Thanks for the video, i'm looking to buy one of these on facebook marketplace for a very good price. Does the switch on the bottom turn off the entire unit or just the power inverter? I would like to be able to turn off just the inverter to reduce quiescent power draw when i'm not using any appliances. Thanks

Found this in the top part of the description box: 880 views Aug 27, 2024 MEDFORD This video goes over assemly and components of the... Are you from Medford..? I have the Eco worthy dual axis tracker. I have Six 200w bifacials mounted on it. Video in my channel

Mine lasted 4 months before it started hissing with a black screen.

อกแตกยัง ไอ้โซ๊ยตี๋

Have you seen it swap sides? Or does it tend to always have to charge one end of the bank? Thanks

Thanks, Gary! Very helpful. Good to have someone with experience talk through the settings. The manual doesn’t give much info.