Відео

Don't cut the skid , place for the oil filter. I just remove the front bolts and bend the skid plate down ,to have access to the filter housing ,then back up to reinstall.

Great vid Scott! Any 09-14 will work..BUT, you absolutely need to ONLY exchange your original pump that is connected to your brake module by unscrewing the 4 star screws and carefully prying apart with a knife or flathead. Attach the new pump to your old computer housing and reinstall. If you just install the new module without these steps, the brakes will work but the abs, esc, and brake light will stay on. Your car is married to the old computer and need it to function correctly. Besides this, the pump is usually the issue due to the original corrosive factory brake fluid. Don't forget to bleed system after.💯💯

I cut a flap and welded on hinges and a bracket to hold the flap using a thumbscrews, much easier now

I'm looking to do something like this. I want to do a trap door though. My luck is a rock would shoot right through that open hole and smash the oil filter assembly. Hey Toyota.... this shouldn't be this hard.

I did something similar on my 4runner

I have a 2007 tundra 8 cylinder 4wd. Does anyone have measurements so I can mark out. I won’t have any problems with the cutting and welding.

Where on eBay did you find the steel circles? Thanks Max

Was your ABS light on when having this issue?

How did you swap cpu units with the modules?

Nice job! I think you should weld together some ramps, too!

Hello. Thanks for the information and video. I'm considering purchasing a 2011 Hyundai Genesis with elect brakes and adaptive cruise control. It has an open recall for the brake cap, and im.sure had the standard dealer repair for the abs system you referred to in the video. The oem part number for the abs control module is (58920-3N3A0). I believe it would be worth the chance if I could apply your fix to the car. My question is, was your vehicle a v8 or v6 and will that matter regarding the 2013 swap? The car I'm considering is a v6. Thks I know this is an old post but maybe you can assist and let us know how your cars braking system is holding up. Thks again

Those ramps make me nervous.

same question thanks, I have a 2015 genesis all the lights coming on told by different dealer the ABS Module is the propblem. The dealer purchased from was worthless. I was just told $2400 for ABS Module and found part on e-Bay $72 -$260 and up. if i get the part and need the tech and his machine to bleed the brakes should I even try doing any of this myself? or have the same tech do all of it? I was already told by my shop unable to install because cannot program it.

Hyundai Dealership don't care to fix their car correctly because they want you back again soon with other problem similar to the last problem .

Great idea

Fall 2021 update. We still love the car. V8 is still rocketing me forward, and no brake issues at all.

Hi, I know this thread is quite old but hopefully you or someone else may be able to respond. I have a 2009 Genesis 3.8 sedan and I just recently started having the common brake issue I assume is due to corrosion in my ABS module. My car’s module has the part number 58920-3M050. You said you put a newer module with part number 58920-3M060 in your 2009 and was it a direct fit replacement? I just wanted to verify before trying to purchase one myself and I don’t want to buy one prior to 2013 so that it hopefully won’t have the corrosion issue. Thanks!

This was very helpful in planning our Kayaking trip from Marymoor, where did you launch your Kayaks from?

Good to hear! Cheers!

Hey man I'm having a problem with my genesis 2013 When I break the car goes to 1 side... But a was thinking that the problem was on the suspension.. But today thay tell me that the abs module is just passing fluid to only 3 wheels. So they give me the same price on the dealership.. So do u think is the abs module? Thanks

Has anyone run into the EPB module failing and any solutions for that being a cheap fix?

My parents just bought a 09 genesis with 60k brakes were just done but Mg dad says he feels the car bumpy when it comes to a stop. Brakes were just done by previous owner Pedal feels good but the car is bumpy when it comes to a stop

I have the same car color and all but mine is a 2010. Awesome car, but damn those brakes and the electrical system

Im gonna try this fix because i paid the dealership 950 00 to replace this ipc module and they replaced the brake switch, i still have issues starting, and they really dont know what the real issue is, im gonna try this and pray this helps , its overall a good car except this issue

How have your brakes been thus far after posting this video? I recently just purchased a 2010 hyundai genesis with 75k miles on it and it had the dot 3 replaced with the dot 4 fluid but I am still concerned that corrosion may have already taken place in the HECU that I cannot see which is why I'll probably go ahead and do the correct fix for it and not the bs Hyundai tried to pass off as a "fix" because after the additives wear off in the dot 4 fluid the system is open to corrosion again.

I followed this video. fixed it right up. $133 for used low mileage ABS unit from ebay, paid my guy $150 for labor, and flush. BAM! fixed. Thank You!!!

ypu have adaptive cruise, and electronic e brake?

Thanks Scott!!

Hello, not related to the brakes, but I heard you say at the time your Genesis had 183,000 miles on it… Have you replaced your transmission fluid? I am looking at buying an 09 genesis with the 4.6. I’m just concerned about the cost of changing the transmission fluid. Having experience points, do you have any insight to this?

Having the same problem with my 2011 genesis sedan v6

Do you know the part number? I am having this issue with my 2012 Genesis Sedan R-Spec. Pedal goes to the floor too.

I have a problem with my breaks going to the floor was did you have this problem before I start changing random parts please help

After swapping the unit, did you have to reprogram it? How about bleeding the brakes? Thank you in advance.

At the end I'm breathing on the beam...its a cold night so if it was light, my breath would make a foggy cloud so thats why the beam is so visible. also the house in the background is my pissed of neighbor