Відео

Thank you! Hope I helped!🥰

Of course! I totally agree! This material literally saved the nand...and my time!!

Thank you!🥰

Thank you so much 🥰

You are right!There it is the 1 and 2 pin which are connected to ppbus_g3h both.

Thank you so much!

Thank you very much!🥰

Thank you so much! Yes the soldering paste should be kept I the fridge. It will last longer. But there are ways to refresh it.

@@AnyrepairENG Thanks for replying. You mean refreshing by adding some flux paste to it? Something else?

Yes flux makes it good again.

Check out if the is a thermal issue first. After that you must check for vram issues or gpu issues...but these require electronic skills and equipment.

You are right! I miss you too! I will get back to you very very soon with interesting videos!

Iqm getting the schematics from vinafix.

Have you check for voltages and ampere consumption?

Yes it is cost effective that way!!😎

Thank you so much!🥰🥰

Yes it is the best practice, thank you very much!

Yes it is much harder...thank you very much!

Wow, very glad I helped!🥰

Thank you so much!

Hello, yeah the electronics, die often that way. Obviously something is burned, it could be something simple as a mosfet,or something more difficult to find and replace. In my opinion you need the help of a professional...!

@@AnyrepairENG so something's burned I see, I got no car and don't know any professionals who I could ask to lend me a hand so I'll have to try doing my own research on UA-cam and try to make it work again, you gave me a clue already so thank you and please wish me luck

@@tuto4322 the best of luck my friend!

Thank you! I agree very time consuming...

The soldering tips are JBC original. The brand of the soldering pen is aixun a9 (jbc clone). Hello from Greece 🥰

@@AnyrepairENG it is sugon a9? Or aixun t320 or t3a ? Thanks

@@skysurfhf aifen -a9

Thank you very much!

Thank you very much! The soldering tip is 210, temperature used 350 Celsius. The flux is really good, is the chipquick smd291.

Hello, sorry to hear that! Iam very sceptical on placing a new bga chip that large with only a heat gun on top. It surely needs a preheater and low temperature on top about 290. Advanced soldering skills and luck are needed. Also a holder for the top nozzle.is a must! The success probability is very low, you know every first time, is difficult. Ps:you shouldn't jump the 2 mosfets... the repair process now is very difficult..

@@AnyrepairENG when I jumped the mosfet it just shutdown the charger. That’s how I discovered the short. At first I thought it just wasn’t charging and powering up. New video is chip is half the cost of a used motherboard and local shops wants the same price to install on bga station. I had forgotten about checking the memory chips for shorts first tho. How would I check them now? Asus gl503vm.

Check for ohms on the memory coil. With the gpu on the board it should be 16-60 ohms. Then there is no short!

Hello and it is a bios issue? How?

@@AnyrepairENG YES SOME TIME TOUCH NOT SHOW IN BIOS

AND SOUND IC IN HP 840 G5 NOT DECCITED

AND WIFI CARD NOT SHOW

​@@HASSANHASSAN-xy3ozI dont think that it is bios issue. Maybe you're missing some voltages or communication lines.

Greetings from Greece!Thank you for being with us!

Greetings from Greece! Nice to have you on board! Please check my other videos too!

Hello, you can see it, on its led display, it is set to 120 celcius

Hello,thank you very much! The cpu is capable for displaying graphics, so it is activated!🥰

Yes it is not easy!

@@AnyrepairENG it fkin impossible you aernt even real

You are so funny...that's real!

Thank you so much! I will do it asap!

This is the way to transfer the serial number and windows key to any ready to flash bios. It is not a way to clean me region, just watch the video.

Thank you too! I will try to make one too!

@@AnyrepairENG yahooooo next one

Yes this a a common desire, in all our community!

Hope I helped you to understand!

Oh brother if it work for you, tell me to send you the photo with the right resolution....😉😉..I wait for your feedback, if it works or not!

@@AnyrepairENG I will let you know within 24 hours

@@AnyrepairENG Hi, Thankyou for the video and the hack actually worked. But after some time the same problem aroused and the laptop is again giving the message to use the charger that was shipped with the laptop

FYI I am using the original 230 W lenovo charger that was shipped with the laptop and I have removed the charging port because I got it repaired from the service center and the port was heating so much that it was ruining the jack of the charger so I tried to connect it directly and it was working all fine till now. But now when I turned on my laptop it was again showing that message. Do you have any solution ?? By the way thanks for the hack I think I should once more repeat the fixing of the port.

@@SiddharthAtrey thank you so much for the feedback!

Ok stay tuned!!

im waiting also :)

Of cource I will do so! Thank you!

Thank you so much!

Thank you! Good luck with the repair!

Yes this is the only way to cheat the board to sense 230w adapter

Yes this is the only way to cheat the board to sense 230w adapter

Hello, thank you very much! The ddr4 ram voltage is 1.2V, but it requires 2 more voltages the Vtt 0.6V and 2V5 (2.5v) in order to register to the cpu

In my opinion removing the micro sd card, it is more difficult,as it is plastic and everything is stored in it. I didnt want to miss a chance!

@@AnyrepairENG Yeah, still... it would be interesting to see how the contacts to SD card were made. I dont think they have been soldered, no way. They probably have some sort of spring contact pins on pcb, and card is simply glued to it.

@@fradd182 yes its not possible to solder the sd! But I couldnt risk the storage...

@@AnyrepairENG I understand, but i dont think that glue would need more than 130 c to melt. Im just suggesting to give it a try, if you ever come across the stick you can take a risk with.

@@fradd182 of cource I will and thank you for your suggestion!

Something simple can save the day 😉

I think they dont want to mess with cpu replacement, since it is a risky think to do and expensive to buy. It is not sure that you will buy a brand new one or a used not working cpu. I charge 100 euros for the job + the price of the cpu.

@@AnyrepairENG and how did you go about heating it? It didn't seem like hot air so I assumed it was sort of plate

@@LPgmxDan on the bttom side the preheater is IR but the upper heater is hot air. I own a ZM-r6000 station.

Thank you. At first I would check my disk. Then I would disable the discrete gpu, for testing.

Hello, on pin 4 you should have ppbus-g3h which is 12,6 volts. If you are having 7V there is something wrong with the mosfet's input. Check if something is pulling down the 12.5V.

This is my Greek channel profile (Anyrepair), you should check for partial shorting!

Yeah, and kills electronics!