- 44
- 153 861
Roboticus Prime RC
United States
Приєднався 8 чер 2012
I'm just a man that wants to share his hobby of RC on the cheap!
Back on Track! Christmas G Scale repaired! #gscale #modeltrains
I was able to get my Newqita loco back up and running. Had to make some brass shims to make the gears stay in contact with the worm gears.
Переглядів: 3 260
Відео
Pennsylvania Meteor First Start in 20 Years!
Переглядів 231Рік тому
My John Deere 2630 moving hay. Should I make an RC version? #johndeere
Переглядів 836Рік тому
WPL B16 Axle Upgrade Part 2 #wplb16 #wpl #upgrade
Переглядів 536Рік тому
I've got My WPL B16 on the bench. Time to upgrade the axles!
WPL B16 Axle Upgrade Part 1 #wplb16 #wpl #upgrade
Переглядів 1,5 тис.Рік тому
I've got My WPL B16 on the bench. Time to upgrade the axles!
1/16 M4 Sherman and M26 Pershing in the Snow
Переглядів 1,2 тис.Рік тому
Took my tanks out in the snow. I let them sit outside to acclimate to the cold to prevent snow from sticking to the tracks. I may have let them stay out a little too long in the below zero temps. I had to let the electronics warm up, and it took a bit of moving before the gearboxes loosened up as well. #henglong #m26 #rctank #m4 #pershing #sherman #snow
Can I Fix my G Scale NEWQITA RC Loco?
Переглядів 262Рік тому
The Christmas train is in trouble? Here's my attempt to quickly fix it. #gscale #rctrain #newqita
Engine Pulling Backwards #gscale #newqita
Переглядів 303Рік тому
1/16 M26 Pershing and M4 Sherman in the Mud!
Переглядів 2,2 тис.Рік тому
Took my Heng Long M26 and Taigen M4 for a romp in the mud! #henglong #mud #taigen #m26 #pershing #m4 #sherman #rctank
RC Tank Track Cleaning #henglong #pershing #m26 #rc #rctank #m4
Переглядів 3 тис.Рік тому
Christmas G Scale Train Hauls an Abrams Tank! #gscale #tank #Christmas
Переглядів 6 тис.Рік тому
WPL C14 Monster Truck in the Mud!
Переглядів 716Рік тому
Years ago a very dear friend of mine built this custom WPL C14. He made the custom bed from a WPL B1. Sadly, he never got to fully enjoy it as he passed away before the upgrade parts arrived. I was able to bring myself to finish it with a few of the ideas we had for it. Namely a lifted suspension for some monster tires I custom modified from an old Newbright RC. And the crowning achievement, 4 ...
1/16 M26 Pershing Hauled by a G Scale Train
Переглядів 2,8 тис.Рік тому
With the FOB's M1 Abrams and M45 Pershing out of action, this only left them with a 76mm armed M4 Sherman. Luckily, they were able to take delivery of a new M26 Pershing, by rail! #henglong #gscale #rc #rctank #m26 #pershing
Heng Long 1/16 M26 Pershing Recoiling Airsoft Turret Build (Part 6)
Переглядів 2,3 тис.Рік тому
It's DONE! Come watch me take it for a spin!
Heng Long 1/16 M26 Pershing Recoiling Airsoft Turret Build (Part 5)
Переглядів 450Рік тому
Time for final assembly!
What longer barrel is this? Does it come with the HL barrel recoil unit?
It's a custom-made one. I made it from a brass tube and to scale length. The recoil unit, I made from Taigen Tiger 1 unit. There was a lot of custom work to get it to fit into the Pershing turret. I have a playlist of the whole build.
Do the new ones with tk7 make that cannon casing clanking sounds ??
I don't think so.
*promosm* ❤️
How did you build this if i can ask?
Sorry for the late reply! I actually have a build playlist! ua-cam.com/play/PLd3aZwk--8AeF-1kYIYCOAE_pvVoHBtKX.html&si=Ve-XBaYG4kfDAfyN
A whole rescue operation!
Broke a track and an axle.
@@Roboticus_Prime_RC To break the axle, you need to try very hard! Is it made of brass or steel?
@@tanks_models That one is brass. They were basically just press-on, and stripped the ridges on the axle. My tanks are very heavy, so easy to do. I'm in the process of upgrading it again. Just need to find time to finish it. ua-cam.com/play/PLd3aZwk--8Ae_uVHEDznfIA0wwSP2sL3s.html&si=mCCNoMrDfdetBxau
We need more dirt! These models are capable of more
Like this? ua-cam.com/video/KXS1TmRby2g/v-deo.htmlsi=VIoWNZcxpixA7qp5
@@Roboticus_Prime_RC How do you like that? ua-cam.com/video/-WysCmjzvtk/v-deo.htmlsi=NKa2296ejlHWD2px
What are the tires and wheels off of.
They were originally off of some newbright truck I bought at a yard sale for $1. I cut the centers out, the spikes off, then glued them to the WPL wheels.
Nice bro
@@paul707.7 Thanks for watching!
nice! metal tracks?
Yes. The Sherman is running MATO tracks, and the Pershing has Taigen.
very nice - would think necessary. ugh…Mato. hope you didn’t apend hours with a metal file removing their name off each track link like I did in my T-90 tracks.
@@ericdbates I don't recall there being a MATO stamp on them. I just put them on and started running it through stuff. Lol Taigen didn't have the duck bill tracks available when I built this tank, so I went with MATO. I'm thinking about upgrading the Pershing to MATO as well.
they look great! worked well. yes, the T-90 tracks had “MATO” raised in metal on each track pad (both sides). I bet I spent 8 hours removing it. Sherman’s probably don’t have the room. :) anyway, nice work.
I have a Heng Long Tiger. Nice Pershing. I would like to install recoil, that's the only thing I think it needs.
You're in luck! The Tiger 1 has all sorts of aftermarket parts for it.
@@Roboticus_Prime_RC Good news. I had the tank in storage(1 year) because of moving. Getting back to it now.
Nice ride 👍👍👍 Toyota looks great.
Giant model train
Very nice..
Man that crash scared me!
Cool stuff my guy.
U should show the build process and talk through it. That would awesome
On the axles? Sure.
LGB!
It's actually a NEWQITA Toys locomotive with some Bachmann rolling stock. It looks like a copy of an LGB.
@@Roboticus_Prime_RC it really does.
@@gabrielmikhail7525 I might try to cram an LGB gearbox in it. The ones that are in it are giving me trouble.
You could do a magnet mod to it. Instead of using screws to hold the hull halfs together put micro magnets on the screw posts. I did this to my Henglong Tiger I , works great and allows quick access.
Did you do anything special to keep from getting snow/ water in your components? In other words how did you go about waterproofing if you did?
I've done no water proofing. But, I also don't go into very deep water. If I wanted to really push it, I could put the control boards in a bag, or small Tupperware inside the tank. The motors can run submerged without issue. Snow is a non-issue. Just let the tank sit outside for 15ish minutes, so it is the same temperature. The snow won't melt on it or stick to it then.
Very cool I want a tank like this first my collection
The Sherman is mostly a Taigen. It has a MATO turret and tracks because Taigen didn't have the 76 turret or duckbills at the time. They do now, though. www.taigentanks.com
🤗🤗🤗🤗
😊😊😊😊
Very nice
Nice 👏🏿👏🏿🏁🏁🏁
Nice tanks 🔵🔵🔵👍👍👍🙂🙂🙂🔵🔵🔵
Someone should at least put a bow on the turret. Humbug.
Cool cargo. Abrams?
Just something I picked up at a garage sale.
Nice 4ws truck 🔵🔵🔵👍👍👍🙂🙂🙂🙂🔵🔵🔵
Cool build! Sure you're friend would approve.
Lol I was going to do that
Nice 🔵🔵🔵👍👍👍😀😀😀🔵🔵🔵
That was great. Nice collection you have there.
Glad you liked it!
Very cool video
Thanks!
Very nice tank 🔵🔵🔵👍👍👍😀😀😀🔵🔵🔵
You know I have this same tank in heng longs 7.0 version as I have said before. But mine doesn't have the barrel recoil either. So I ordered the heng long barrel recoil unit from toucan hobby and I'm going to try to put the barrel recoil unit in my pershing so it matches my m1a2 abrams, my king tiger, and tiger 1. They are all heng longs. Motion rc sells 4 heng long models in the pro versions that have barrel recoil. And they are the M1A2 Abrams, King tiger, Tiger1, and the Panther G. Great video and very informative. Love the barrel recoil!!
Heng Long really has come a long way since I bought this tank. Most barrel recoil units you buy are for IR turrets. This one still shoots the 6mm BBs.
@@Roboticus_Prime_RC the one that I bought (recoil unit) has the b.b. and recoil function.
Could you have saved yourself alot of time splicing wires together for hull recoil by just buying a new 7.0 board? I just trying to learn a little more about these tanks.
Those were not available when I bought this tank. It's 8 years old. The only thing available at the time was something expensive like an IBU, so I spliced two of the RX-18 MFUs together to disable track recoil. And, when I bought the new Taigen board, Heng Long was still using the RX-18. My second kid delayed all RC projects until now, so I'm using parts I bought a few years ago. This tank is getting the Taigen V3 MFU. The only reason I have to do any wiring at all is because I ripped the guts out of their Tiger 1 recoiling airsoft turret to make this M26 turret. Thanks for watching!
@@Roboticus_Prime_RC oh. Ok I completely understand. Great video!!
Nice tank 🔵🔵🔵👍👍👍😀😀😀🔵🔵🔵
Great video my friend, like😃👍👍 thanks for sharing... New friend.
Cool you should put the camera closer to the tank 🔵🔵🔵👍👍👍👍😀😀🔵🔵🔵
I do these days. This is an olllld clip.
Nice truck 🔵🔵🔵👍👍👍😀😀😀🔵🔵🔵
Cool 🔵🔵🔵👍👍👍😀😀😀🔵🔵🔵
Nice model! How did you add more wheels in the back tracks?
I kinda go over it in this video. ua-cam.com/video/VjxiCBiQ6yo/v-deo.html I cut a few mm out of the middle of each tire, and super glued them back together. Then I cut the outer ring and hub out of a set of rims and glued them to the back of another set of rims. Doing it this way let's you have duals without making the truck wider. There are aftermarket rims you can buy that let's you just put uncut tires on for duals, but they make the truck wider. I'll be making another set soon for another truck I want to build.
Could you please tell me were to purchase the recoil kit .
This specific mod isn't a kit. Taigen made a recoiling airsoft turret for their Tiger 1. I'm gutting one of those and modifying a Pershing turret to recoil. Part 1 covers the tear-down. ua-cam.com/video/grgpyX7WXKU/v-deo.html I get most parts from www.taigentanks.com/ They do have normal IR recoil kits, though.
@@Roboticus_Prime_RC Thank you for the information . Keep up the great work .
Super movie. Good job. Tank repaired?
Not yet. I'm getting ready to replace the turret and electronics. The track just needs a replacement link. I'll fix the track as part of that build series. The buried tank is very beat-up. The previous owner must have had another tank with a super hopped up airsoft, because it has a bunch of 6mm holes and dents in it. It will need a complete rebuild.
Damn that's cool. What did it cost you?
Initially? $80. I've put a few hundred into it over the years. I have spare track links, so this break will only cost time.
Ye
👍
Nice . Just got one a few months ago. Can't wait to do some upgrades on it .
I've got a few more older videos coming up on this tank with more upgrades.
kool
©© c is this your video . took off your channel ua-cam.com/video/s1wSjZs8E7g/v-deo.html
Just subscribed. Can't wait to see what other rc customs u have coming in the future
You're in luck! I'm getting ready to make more content. IRL just got in the way.
@@Roboticus_Prime_RC I feel ya on that. It's the same way with me.