Відео

No Problem..!

@@علیسمیعی-ش4ذ Hi, I only repair my own Car. Thanks for your comment.

@@علیسمیعی-ش4ذ As head gaskets go, this is one of the easier ones to fix. Any competent Mechanic will be able to fix this too factory Specification...!?!🤔😇 Ask your Local Garage to Fix it for you. Me, I only repair my own Cars. Thanks..!🤔😇👍

Thank you, Modern cars are not EASY..! This is a Job for the professionals..!🤔🤔😇😇

H thanks for your comment, mate..! This is not meant to be a Oscar Wining Video. It is just me doing what i am am trained and qualified to do, with a little showing off thrown into the Mix..! I think it fits the purposes, i have outlined..! If God almighty sends me an assistant then i will have an assistant, OK...!🤔🤔😇😇

Your Welcome Mate, i hope you got it done to Factory specifications..!🙏🙏

@HowToSaveMoneyOnCarRepairs With this video i sure will 🙏

Hi Mate, i just make the videos to show off but don't worry i know how to do most things...! If i don't, then i look on youtube and find the answers i seek..! thanks for your Comment..! 🤔🤔😇😇👍👍

Hi, i am not sure if this is a comment or a question, you are asking..! If it is a Question then the Best Gaskets, The Ones, i have used are: CORTECO FAI Auto Parts AJUSA VICTOR REINZ PAYEN ELRING Never had a problem with these Gaskets. So i recommend you use one of these Gaskets, OK..!👍👍😇😇

I Don't know, for sure..! If you want to be absolutely sure then purchase a Haynes car repair manual for this Car..! 😇😇👍👍

@@FrancoisProjects I wired My Electric Switch (Which is a Motorcycle ignition Switch) to The Red Central Door Locking Button. The button in the Centre of the Dashboard, with a picture of a padlock on it. This job is best left to an Auto Electrician or a Mechanic.👍

I wired my Key Switch to the RED CENTRAL LOCKING BUTTON on the Dashboard but i have some knowledge of Car Electrics. I would suggest you take it too a Vehicle Electrician and let them, do it...! 👍👍

My passenger door doesn't lock. I ordered aftermarket central locking kit. Hopefully it work

Thanks for your Comment.

I have a 2009 Fiat Punto, 1.4 litre for Sale, with MOT. If you are interested email me. Thanks 👍👍

The Crankshaft timing Mark, which i highlighted with Tippex..! If you are attempting to do this work yourself. I highly recommend buying a Peugeot 207 Haynes repair Manual.

@@HowToSaveMoneyOnCarRepairs did you leave the crank at TDC before putting the timing belt on ?

@@lllla7624 Yes.

It says in the haynes manual to use drill bits, to establish and lock the camshafts in the correct position. Do that..! follow the Haynes Manual. If you fell you are not confident enough doing this Job then call a mobile Mechanic, to finish it..! 👍👍

@@macfie9331 l already have Axle Stands. I did not use them this Time because the Car was on a Slight Slope..! The best opinion on this occasion, I felt was to Support The Vehicle on Tyres. As you can see in the Video...! Thanks for your Comment..!😆👍

It's good enough..!

@@samboon3424 I did this to stop the Engine moving while I was removing the cylinder head bolts. With my breaker bar..!

@@HowToSaveMoneyOnCarRepairs ah ok, I’m doing this at the moment without the engine mount on, however one bolt isn’t moving and the bolt’s head is starting to warp. Hopefully it isn’t rusted

@@samboon3424 How did it go? I'm currently doing the job and can't move it. At least 2 head bolts are stuck. I tried almost everything. I don't think it's rust but maybe gunk or the upper part of the bolt bonding with the aluminium cylinder head.

0:00

@@ClarkNicolas-mz5uz Hi yes, the Sumps on Kia Picantos do rust and Leak. You need to replace the Sump and they are Cheap to buy.

Exactly..

I am glad the video helped you. Thanks for your comment.👍

@@HowToSaveMoneyOnCarRepairs Я уже поменял, всё получилось, спасибо!👍

did you have to take off all the engine mounts?

@@samboon3424 No you don't have take of all the Engine Mounts. Just the the Engine Mount that Covers the Timing Belt. You jack up the Engine by putting you jack under the Sump. The Sump on Peugeot and Citroën Vehicles is specially reinforced for this purpose. Buy a Haynes Manual for Peugeot 207, there is plenty of useful information in there..!

@@HowToSaveMoneyOnCarRepairs Ah ok thanks for clarifying. I do have the haynes manual but it says 'Do not jack the whole car up from the sump,' but then says in the timing belt section to 'jack the engine up from the sump.' So it contradicts itself. Guessing it just means the engine can be jacked. Did you use a block of wood on top of your jack to support?

@@HowToSaveMoneyOnCarRepairs also is there any point in locking the camshafts if you've gotta remove them to get to the cylinder bolts anyway?

@@samboon3424 Nope just follow The Haynes Manual, if you have any doubts...! The Authors are more than Qualified and you won't go wrong, thanks for your Comment and best of Luck..! 👍👍

Go watch somebody Else then Mate, Okey..! 🤔🤔😇😇

It should go all the way in, unless there is dirt on the driveshaft Splines. Also if you have taken off the inboard (Inner) CV Joint then you must make sure (The Spring that is fitted in these CV Joints) is put back. That Spring holds the Driveshaft in Place..on Citroen and Peugeot Cars...!🤔🤔😇😇👍👍

Glad it helped you.😇👍

I agree the Video is Good, Make sure you Subscribe..! Thanks..!

The Camshaft (Sprockets) are secured by Bolts..! Once you remove these bolts, you can slide (The Camshaft Sprockets) off..! If they are a little bit stiff, tap them with a RUBBER HAMMER. A Haynes Repair Manual is a better Reference for all this..! You can Buy Them on Ebay...! 👍👍

@@HowToSaveMoneyOnCarRepairs I have the manual, but they are not really specific about it. I got hem off though. The exhaust one was easy. The intake one was harder because they have put a 38mm plug on it. Probably just because not everyone has that at home. :)

@@HowToSaveMoneyOnCarRepairs What size spanner did you use to counteract the camshaft when you loosened the bolt

@@samboon3424 Hi, i losened the camshaft bolts when the Timing Belt was on. All the spanners you need are in this Set, Buy, US PRO SPANNER SET 14PC COMBINATION METRIC 6-26MM RING OPEN WRENCH SET 2277

The Sealant i used is V-Tech Vital Red RTV Sealant. Heat Resistant to 365C. You can Buy it from Euro Car Parts, Machine Mart OR Ebay. Good Luck with your Repairs.

Ok..!

Me neither..! These are African Roadside Mechanics, trained from 10 OR 12 Years Old by their Master. Most have been deserted by their Parents and left to fend for themselves. They sleep on their Masters Floor...! They have little or no Schooling, they have been trained by their Master to do it this way. Their techniques you mentioned, will make the Brake Pads wear Prematurely and unevenly. Also make the Brakes unbalanced. The cardboard will perish almost immediately and make the Brake Pads Rattle in the Carrier..! So defiantly not done to Manufactures Specifications. I am guessing they want The Customer to return for additional repairs and pay more Money..! 🤔🤔

Buy a new One..! The unit comes with a new seal, so that should solve your problem. They sell them on Ebay..!

@@HowToSaveMoneyOnCarRepairs thank you very much for the tip buddy! I already buy original from fiat with code, manufacture, but it hasn't any seal, nether glue or silicon or rubber seal xD

Headgaskets are a known problem on these Cars. This causes Oil Leaks from the Headgasket at the front of the Engine. If your Car has as many faults as you say then I would suggest you Scrap It and invest your Money in a New Car...!🤔😇👍

Glad it helped you, watch my other Videos..! Thanks..!

Yes, he was a Good Man.👍👍

It is force of habit broh...! WD 40 Prevents damage to bolts and makes them easier to undo. It also prevents Rust that is why, you are seeing me use it here. Every Mechanic has his way of doing things. I believe my methods are within the Guidelines..! Have nice day, mate..!🤔😇👍

It was a successful job performed to Manufacture Specifications and the Car is still on the Road Today. Driving as the Manufacturers intended. So I will ignore your Comment, Mate..! Maybe I will get One Of your Women to Help me next time, ok..!🤔😇👍

@@HowToSaveMoneyOnCarRepairs Hahaha. That's the best response to that

@@niquedegraaff I always reply to Comments. I am on youtube for the right reasons to interact with other People and share knowledge. The Sealant i used is V-Tech Vital Red RTV Sealant. Heat Resistant to 365C. You can Buy it from Euro Car Parts, Machine Mart OR Ebay. Good Luck with your Repairs. 😇😇👍👍

Ok, glad to hear that..! 👍

That's me haven't succeeded taking it out.

Hi, i think it should be the Same One for your Fiat Aventura. Check your Local Parts Supplier. Thanks and Subscribe..!👍👍

Yes, you can get better Access, if you Jack the Car Up...!