Відео

@@alexbell9196 if your fan is blowing towards the front it’s not correct. That was a problem in 2019. The fans were wired wrong it could be a problem with the newer ones. Also, I’m sure it’s an easy mistake to make at the factory.

@@williambarry8015 thank you I’m glad you enjoy them

He’s pretty smart he hasn’t yet he’s always held it but I put a tarp down and some moving blankets and some absorbent pads just to be safe This is my delivery car for my business the lower part of the backseat is removed and I have a big tray that slides in where the seat cushion would be it can be pressure washed once removed I don’t really need the backseat All this car is used for is shuttling packages it’s a work vehicle I wouldn’t put him in my truck but the car I’m not really worried about it.

Not if you want your exhaust to stay in one piece, I sold that thing it would rattle itself apart I was on the third exhaust assembly with only 800 hours on the tractor

@@matthewmilam286 I don’t blame you, what did you replace it with? Thanks for the reply

I don’t know what you’re talking about I have owned 2 of them My dealer was great about taking care of minor issues I’ve had

Just google Trigger Wireless Accessory Controller You can order it from anywhere online Amazon Walmart Or you can go directly to the Trigger Website

Thanks so much

Mahindra USA, Inc. 9020 Jackrabbit Road; Houston, TX 77095.Toll Free 877.449.7771.

I have a rubber coupling on mine it’s been on there for almost 500 hours now I haven’t had any issues

I bought it from a local dealer Honda of Paris Tennessee before the pandemic

If the cable got out of adjustment and you kept running it it’s already too late sub transmission needs rebuilt If it starts not fully engaging and jumps out of gear if you don’t stop right then & adjust the cable it’s Game over Just a couple times of jumping out of reverse or low gear It’s going to need a rebuild It rounds off the edges of the gear Sort of looks like a drum but it round the edges and won’t allow the gear to engage fully but it’s caused by incorrect cable adjustment every new machine after running it for a few hours it will need to be adjusted After it wears in but if it’s not adjusted as soon as you start having problems it Permanently damage is the sub transmission requiring repair

🤷🏼‍♂️

I don’t want Noisy exhaust I have evolution Powersports it’s loud enough

@@matthewmilam286 Doesn’t have to be louder. You could have the same noise level with a much better sound, if you went with two separate pipes all the way.

@@muaythai193 I don’t care anything about having dual Exhaust There’s not enough benefit just a waste of money because not only do you have to buy the exhaust you have to buy a programmer The added flow messes with the fuel mixture I just don’t care anything about it that’s somebody else’s cup of tea not mine I have duals on my KFX Since I’ve already done it I have no desire to put them on the talon Besides I haven’t heard any yet that sounded good

@@matthewmilam286 you have. you just have a different taste. the one in the video sounds awesome, haven’t heard anyone say that they don’t like the sound, you’re the only one. 😂 and you don’t need to reprogram if you don’t go straight pipe

@@muaythai193 OK I see where you’re coming from I was thinking in this video I already had the exhaust on it But I just watched the video again to Refresh my memory I have the stock on it in this video but as long as you get Evolution Powersports It does not have to be programmed it’s still has that Throaty sound It’s not too loud in the higher RPMs It just rumbles If you listen in this video ua-cam.com/video/dAbQU6HT3ZU/v-deo.html It is rumbling my Metal building & Camera It sounds good way better than Gibson or any dual Exhaust It’s all stainless Very simple to install the fit is Perfect very very high quality I purchased mine from SXS Blog They gave me a hell of a deal. They are some really good dudes over there

I know you ask someone else about the hydraulic oil / fluid and I've tried several but the sad part is the best hydraulic fluid I've used in my mahindra emax25 is Sinopec 10w30 gl4 made in China it beats Shell and mahindra brands the sinopec has great water dispersion abilities and of course it's nearly half the price.

The heaviness has nothing to do with it it was a heat treat problem the steel was brittle it would crack instead of flex You could almost hit one of the faulty mufflers with a hammer and a hammer would just go through instead of denting

The heavier / thicker made all the difference in the upgraded one they put on mine and it's made of the same metal, the thin combined with brittle material of course is a design failure. I tried to weld the tailpipe on the old one and it just cracked in a mother spot, but they did have the tailpipe bracket on the frame the new one the dealership put the brackets on the engine instead of the frame. Yep heavier, thicker is better.

@@williamray5467 I used a generator engine to frame rubber heat resistant coupler I have over 2000 hours now with no issues It’s not all about the thickness Harmonics Metal fatigue plays a big part The Isolating rubber mount helps soak up some of those harmful harmonic Vibrations

Harmonics is right it is a very important issue to resolve, however it appears you have the muffler tail pipe mounted on the frame the muffler in whole should be mounted to the engine so it can move with the harmonic vibrations of the engine so you have not created a harmonic balance condition so you by passed the intended design by keeping the engine rpms high. To each his own ,personally when I am in the field and need to get off my tractor for a while I want it to at least idle at a modest level. I am glad you feel like you've addressed the issue to suit your needs.

@@williamray5467 boo what r u saying???

Don't seem they actually put the upgraded muffler on yours, I know they also have an upgraded muffler tail pipe mounting kit, I think that's what they are calling a upgraded muffler but it's not.

Boo what esle????

Yeah definitely I’ve had it for almost 2 years now It’s been a good machine I haven’t done any major repairs just had a small problem with water getting in the tail light I have a little over 6000 miles on it now no Axle replacements no issues Just make sure to do regular maintenance Grease wheel bearings stuff like that & one of these Hondas will last you a lifetime

I’m in the process of fabricating a hunting blind for my talon. It is a great machine and I’m absolutely addicted to drifting this thing at high speeds.

Zip ties but it was a terrible idea don’t waste your time It worked but it would get dirty real quick and it was a pain to clean

@@matthewmilam286 Thanks for the reply! I still think your idea has merit. I have something I’m going to try. If it works, I’ll let you know.

My buddy had an overheating problem With his

Answer #1 Daedong 1.0L 3-cyl diesel that’s for the e-Max 25 I’m assuming it’s the same Daedong Company building the engine for the 22 Answer #2 I’m not really sure about Running a wood chipper it would probably be best to look at the Implement spec sheet itself and see what the horsepower requirement is and RPM range Answer #3 Honestly with all the work you’re needing to do I would highly suggest At least the e-Max 25 It will do everything you mentioned it might take you a little while but it will do the work but I don’t think a 22 will have the power you need or maybe look @ the Bigger version a step up from the e-max 25 the Max 26XL I have bladed my driveway with my 25 it does a good job it just takes a little time and you have to add extra weight To get the traction you need. Answer #4 Yes I consider Mahindra To be a good Reliable tractor just as good as the other brands I have really abused mine Using it in Ways it was never intended everything considered It has been very reliable. I like that Mahindra used cast iron For the rear gearbox Differential unlike John Deere uses aluminum in their mini sub compact tractors Having said that weight is always your friend When Buying a tractor but yes all of the brands have their own problems Mahindra is no different I’ve had a few issues but I still consider it a quality tractor. My tractor is one of the early eMax Tractors they hadn’t been out very long so it had a few issues & Mahindra took care of everything Since all of the small issues have been fixed I haven’t had any problems. I think with the newer eMax Tractors Have been redesigned and updated so you shouldn’t have any problems if you buy a new tractor. I completely understand it’s always good to gather information before you buy something Personally I wouldn’t be hesitant to go out and buy one You would be surprised how much you’ll end up using it honestly I really like this little tractor it can get in all the small places Do you normally wouldn’t take a tractor We have used it for everything hell my buddy was building a house We used my tractor To move most of the kitchen Appliances into his new house he had swinging patio doors so I was able to drive the tractors into his house Taking all the heavy stuff where it needed to go once you have it you will be surprised how much you can do It makes life so much easier.

Kioti is a twin sister to Mahindra according to what info i can find.

You say I’m racist because I want to protect Southern heritage But yet you call me gay So that makes you a homophobe