Відео

Thank you for a very helpful video. I don’t know why Breville did not explain this in their maintenance instructions as it is clearly needed. On my 9 year old machine machine I could not get the plastic cap off until I discovered that there are two small holes on the cap top. I was able to measure the distance between the holes, 5/16 inch, and made a little tool with a small piece of wood with two small nails set at 5/16 inch apart. With this I was able to start the rotation and then unscrewing the nut was easy. When I looked at the back of the disc I was amazed that it worked at all. From now on this is going to be part of my monthly maintenance.

I have this computer and I hate it! will never reccomend it to anyone!

What about a 2016 mini coop, 8k miles and is selling for $13k? I find that really suspicious. History report is saying its only had one owner.

How is the brevile grind control three years later

Just the answer I needed to start brewing my morning coffee again. Thank you!

Absolutely saved my bacon, installed the same ballast on a 2021 Chevy Traverse and added the extra power wire to get it working. Saved a bundle. Fits perfectly.

Our two most-used burners were extremely uneven flame-wise, and I had followed all the "level the stove" and "clean/soak the burner head" advice with no luck, so I purchased a new head off eBay and tested one. Problem solved! I just received and replaced the second burner, with a similar result--everything is back to nice and even. I'm not sure that cleaning the burners creates the issue, as we clean the whole stovetop in the same manner, but only the two most frequently used burners had the evenness problem. Regardless, new parts worked, despite not being able to see any difference between the old and new by eye. If I get ambitious, I might pull out my micrometer and feeler gauges and see if the gaps and heights are significantly different, but for now I'm just going to be grateful for a stove that no longer burns everything on one side of the frying pans.

Try to clean different way.. keep power on... unlock coffee grander, than disk will be turn to holl 😊

We spent $15... for our first.. at thrift store 🎉 Thanks who ever let go ❤

I try to drive my truck at least 2 xs a week (50-100) miles highway mostly to keep the vehicle going. My mechanic said smart idea.

Hello Automight, Would you show us how to adjust the water temperature! I followed the instruction but the but it seems the up arrow or down arrow button not really activated after being press and hold down for longer than 3 seconds as it said!!! Thanks in advance!

Is there a way to not use the grind feature ? Someone got me ground coffee, I put it in the basket but the grinder still goes on. And it’s so loud ! lol thanks !

So you can use a jug for the waste water instead of drilling a hole on drain tubes?

Hi Automight I have a brio moderna and its been good but it just started the annoying beeping alarm may I ask how did you reset the alarm please?

How did u filter RO filter with the filteration head provided? The RO filter does not fit in that head

Just wanted to let everyone know that you do not need to remove the shifter or the small piece of wood under the shifter. You only need to remove the black plastic square around the small piece of wood and then the large piece of wood holding the window switches. Then you can get to the screws holding the cigarette lighter in place.

does anyone know how to de-scale it? I just bought an used one but i haven’t been able to find any tutorials on this specific model:(

What about a Volvo V50 2.0 diesel from 2009 with 125000kms? Those engines can easily reach 300k kms. Im just worried about the age of the car...

what do you think about 2002 mazda 323 protege with only 62500kms on the clock? is that dodgy or? the seller mentioned that the car has been owned by 2 owners and it got a new battery late last year and has always been garaged. based on the pictures from the seller, it really seems to be in good condition but as you mentioned the car could’ve been sitting in their garage for years so im a bit skeptical

Does anyone know how to descale 😔

I've got a 1990 Toyota Corolla, Carby Seca Liftback only has 28,000kms. Really wanna change the carby to an fuel injected.

all my Yamaha speakers are wired with no negative or positive markings. So I'm guessing it doesn't matter which wire goes into which plug. My Yamaha receiver just has the insert wire spring clip system.

I'm looking at a 2016 Accord Coupe with 12k miles. Seems impossibly low. Have not test driven it yet but once I do I'll probably pass on buying it thanks to your video.

Hi, i have the same machine and it gave me error code 002… i noticed the Ntc Sensor wire is rusted and kinda broken… does anyone know if that could be the cause for the error code? I contacted Breville but they weren’t helpful…want us to buy a new one….

I have a 10 year old unit. Never had any real problems. The grinder seemed to have gotten stuck. I cleaned the chute and grinder like I have done 100 times. Did not work. I was looking around for a new one and decided to check the internet for a solution before I spent another $360 for a new unit. Found this video and my life changed, lol. I took the disk off in 15 seconds and sure enough, a lot of coffee rounds jammed and stuck on the disk. Cleaned it and BOOM, works like new. Thanks for this video. Took 10 minutes to clean it. I read negative comments on this coffee maker and find them hard to believe. Mine has been amazing for about 10 years. I only do a major cleaning about twice a year. I clean the chute about every 6 to 8 weeks.

I’m so glad you mentioned those things in your review. Thank you.

Thanks. I was wondering how the cover on the nut came off. I will try this.

Where does the Coffee filter go

TY for this video. Was getting a 001 error and was not looking forward to buying another coffee maker after spending all that money on one.

My disc won't stop spinning when the coffee is done brewing, very weird. If I tell it to brew, it will spin until it finds the hole and brew properly, but it spins forever when done until it hits some kind of error state. Cleaned it again to make sure gunk wasn't the reason. Any ideas?

My dog ate the "nut" that holds on the disk, when I was cleaning the machine. Any idea where I can source a new one? Breville doesn't carry the part and their parts supplier doesn't either.

Great job but i would say its a bad design Breville made, that Disc should have been a part of regular maintenance and cleaning at this point, and should have proper easy way of opening and cleaning, not everyone can do that but pro or hadymans, they probably did that so they can sell new units after couple of year, bad business.

I can't remove the empty coffee filter message unless I unplug unit and plug in again. Do you know what could be causing this?

MAY GOD BLESS YOU!

Excellent solution. Breville does not mention taking the disc off anywhere. This video is the fix. Thank you

Thanks for this video bought my own breaks and parts

You whine a lot, no car payment, and as soon as you get these you change everything and check everything before you even move it! It's usually got factory 20 year old stuff in it

Excellent, helpful video, but in doing this I came upon one problem that perhaps you have encountered and know how to fix. The first use after doing this, I got 2 of the 001 errors. After that it has worked well, but I have one issue. Today, I was cleaning/descaling the unit. During the process of rinsing after the vinegar cycle, it started giving me 001 errors again. When I opened the door, I noticed the silver disc is 180˚ from where it should be, so the opening is sitting at about the 7 o'clock position instead of the 1 o'clock position. The disc can only go on the spindle one way, so I didn't put it on wrong. Do you know how to fix this?

This is so true

I bought one of these 2 years ago and now it won't dispense any water... 350 dollars to waste I contacted Brio and they won't do anything to help. I called everywhere around me looking for someone who works on them but couldn't find anyone who will work on them... complete BS

It’s there a light bulb where the ballast goes ? Or how that does work I’m trying to replace the light bulb technically the high and low beam but when I removed the ballast there’s nothing there besides a metal plate

I'm currently negotiating a deal on a 2000 Class B motorhome with only 13,000 on the odometer. I got to thinking about how plastics and rubber out gas from day one. You made a good point if somebody's actually driving the thing once every couple of weeks, but if something sits especially for 10 plus years, I think you're right you should probably pass. Ironically, these older vehicles with low miles tend to go for more too when they really should be going for super cheap. When cars look new and shiny people get excited though, I know I certainly did. Good post and I hope people take your advice. I know I'm passing on my purchase. It was actually the Carfax that made my decision. There was this huge gap where nothing was reported, no service, no oil changes, etc. Big red flag.

I'm thinking about buying a 2006 Lincoln Town Car with 45k miles. Just had new brakes on all 4 wheels, new tires on all 4 wheels, new radiator hoses, various fluid flushes, all within the past 1,000 miles. I've heard the Ford Panther platform (Crown Vic, Grand Marquis, and Town Car) is reliable so it seems like it could be a good idea. Thoughts?

Thanks

my man.. this was a fantastic tutorial on how to clean our Breville.. Thanks!!!

This is happening to my Cadillac CTS, I have no power at all to my headlight. My Daytime Running Lamps work on my headlight but not my HID Bulb. I’ve also checked fuses and relays. Could the ballast be the issue?

Thank you! This is my problem! Solved!!!!

Now imagine buying a mint mid 2000's ferrari with low mileage...lol

He has no idea of what he is saying burners have to be cleaned regularly you can do that by cleaning the burners with detergent let them soak for half an hour you don't need to buy new ones for years

Thanks to the channel. As always,very interesting,everything is clear and understandable.