Відео

wala pa idea boss, pa sugest naman within luzon try ko ^_^

Kelan kaya pwede makapag colab sayo boss ?😂

Honestly i forgot, but i think i used 2mm thick. And it really helps with the junction temp

@@joshlopezofficial6676 i did the same thing i use 2mm but still my junction temperature goes to 109 can i use 1.5 mm please tell me

Just check if the pads are touching the heatsink. It should be fine

@@joshlopezofficial6676 ok i'll try 😞

@@TADKAGAMERSfor 2 memory modules on top use 1.5 mm. and For the right - left modules use 2 mm. use 2 mm plastic washers for the back screws to make more pressure on the core. ( i have mech 5700xt oc)

pag mag ffishing lang napunta sa lemery sir, my rest house po kami jan

Exactly. This is the answer!!

Thank you!!

@@angelorusso9345 you are welcome 💖

Why do they have to be diffrent thickness?

​@@ak-47m​ its not optimal. it is going to work fine, but at peak performance, the gpu will not handle the temperature properly. The gpu will shut down if the temperature is too high I did it the first time i changed the pads to 2mm all of them. The pc was shutting down every time i played specific game Make sure the thickness is right to skip all the headaches

Hi po ^_^

Yes po yan po ^_^ sige po

ahhh opo na sabi nga po ni daddy ^_^ salamat po

Nag hubad lang at medyo sumakit daliri ko ^_^

Sariling bangka boss ^__^

The thickness is 1mm,some coolers the 1mm will be too thick so you squeeze it to make it like 0.75,i got new pads and tem went down from 94 to 72 amazing drop tbh

Calatagan po yan sir ^__^

@@joshlopezofficial6676 san po exact address sa calatagan yan Master?..private area po ba yan?

@@norbertermita5036 yes po sir, private place po sya ^_^ kaya di ko na din po sinabi exact location sa video

Thank you Master. Mahirap pala mapuntahan yan. Buti nakapasok kayo Sir kahit private yung area

GoPro 360 sir

@@joshlopezofficial6676 ah okay master. Mejo mahal pala

Thermal grizzly po

I think it is 2mm

Same

@@TetsuoCL 2mm sides, 1.5mm top 2

i did it and i got instant 110c on gpu core. I then opened it back up and squished the thermal pads to make them smaller in thickness and that solved my problem but also made my mem junction go up.

@@YourBassNeeds yeah same happened to me after that. I used 0.5mm washers to increase pressure to a certain extent. That solved the issue pretty much but not completely :D

@@YourBassNeeds Ok so I better leavy it as it is or just change paste not the paste and undervolt it more.

@@CptSlow89 you can change the thermal pads aswell but the two outmost VRAM modules need to have slimmer thermal pads than 2mm.

or what? if it isnt conductive paste then no harm

Its the mech only

I used 1mm thick

@@joshlopezofficial6676 in the video it seems 2mm actually. Are you changed them after because of contact reasons?

@@AnxStudios sorry my bad. Yeah i actualy changed it to 2mm

@@joshlopezofficial6676 np. Did your core hotspot changed any? I heard there can be contact problems when you change the pads. Somebody said his junction raised like 6c.

@@AnxStudios after doing this my juncyion shot up to 110c. If you use 2 millimeter you will need to sqush them down to make them smaller

Update?

bad contact with gpu die. need smaller themal pads or squish them together

Try usinh grizzly thermal paste... and i did not use washers ^_^

I removed that extra strip and it solved the issue. you can clearly see at 21 seconds (video) that there was only 1 strip and not 2 strips.

Did your hotspot temp drop? Mine hits constant 110 immediately. I'm thinking changing the paste. I have a 5700 xt mech oc too.

@@AnxStudios mine has a memory junction temp and core, no hotspot. Everything running great now .

@@g0at3 thats good to hear but you must have a hotspot temp all the 5000 series gpus had. It can be called junction temp sometimes. If you use Hwinfo or go to your adrenalin driver sensors you can see it. These gpus dont make decisions with normal gpu temp. Cause its a average temp. Hotspot is the hottest spot on the die itself and has a maximum of 110C limit. If one of the sensors on the die hits 110 gpu will start throttle immediately.

@@AnxStudios you are right I read that wrong. My hotspot is 19 deg cooler than the memory junction. Running at 70 right now. I realized I just don't ever look at the hotspot because mining kills the memory temps long before the core temps.

2mm

I think that temp is normal ^_^

@@joshlopezofficial6676 ok, thanks 😊

Nice !!!

can we get a link?

Yeah... kung di lang po mahangin masyado mas madali mag cast ^_&

@@joshlopezofficial6676 oo nga bro, galing din kami sa Iba cove nung Sunday grabe hangin parang bagyo😊 Ang hirap mag cast, ayun zero ha ha

Mga march ayos na ayos na yan ^_^

it's the vram temp, not the core temp. -14C And -19 at the hot spot.

2mm thick sir..

@@joshlopezofficial6676 Thanks Master!!!!

Next vlog po master ^_^

@@joshlopezofficial6676 ok thanks.

Oo nga po eh.. next time mag dadala na kami for sure ^_^

Loka loka wala !^_^