Відео

I have never seen anyone shoot in the round pattern ladder testing. Id loose my mind.

Very commendable

What did you use for a motor and speed control?

I like the idea but without a speed control how would you control the temp of brass when you switch from .223 rem to 300 Weatherby magnum? Thanks

He was wrong. The first step is to hit your thumb. Otherwise, great video.

I haven’t seen printer paper like that for a looong time. Picked up 8lb of Midwest powder equivalent to TAC. Was a great deal.

What Grain Bullet are you using?

In 1965 I was taught to drop 10% from the maximum charge weight. The show looks good.

About 1 1/4” but you can adjust it depending on case size you work most often

How deep is the sidewall on the rotating drum?

Good video, maybe I have missed it but I don't believe that you stated what bullet or what weight that you were using. I had purchased an 8# keg pf SWPR a few years ago and now I am forced to turn to it and develop a new load due to the fact that I cannot find or afford a pound of varget. Thanks for the review.

I can't find it anywhere in the comments.. what bullet were you shooting here?

I have used tac with very good results, 175 smk, win brass,win SLR primer, 42.5 grains, O.A.L 2.850, crimped, shot from 24"varmit contour barrel savage 1/10. Tac is a little temp sensitive, I have taken the round let it sit in the sun and it spiked a bit. My preference is varget but I will use Tac, 1/2 inch 10 shot groups are possible at 100. And it can definitely get you shooting sub moa at 500. 2700 fps

I normally use target for my 69gr 223 loads. As of late it has been impossible to find a big jug and the 1lb cans are 57$ or so . Bought a 8 lb jug of tac for 295$ delivered. Tac meters better for me , won’t get to shoot it for a bit . Doesn’t have that varget smell I like

Great work. 👍

It’s quite the noticeable difference when reloading the brass and groups 😊

Good shooting , thank you for all the information.

What did you make the drum out of/ diameter/ timeing , also just wondering what caliber is that particular cartridge in the video 8mm ?

🎉damn cool!

My experience with Tac is its better suited for lighter bullets in 308win. 130gr Barnes ttsx for example sub moa groups & 3250fps in my mod70 22"barrel. And still 0.7 gr below max according to Barnes load data thanks for the vid

Like your video Sir, mount your scope anyway you like, i like my savage rifles as well as my other actions, your proof is on the target. Keep the videos coming !

Man, that Wisconsin accent! Strong.

My grandfather was a gunner on Lady Lou and said he and another dove through a doorway as a plane hit to avoid it.

Is that unburnt powder hitting the target about 1.5 seconds after hit? Sounds like something is going on there.

IMR 4320, I think, is the number of it. It's not to far off from varget. I got several bottles of varget I bought and not using. I bought it to use in my boys 243. They both don't hunt much. I have used Tac in my 204 ruger and 223 rem. It's hard finding the right powder. For my new 280 ackley improve. It's a 1@8 twist. So, I'm planning on trying Hornady ELD X 175 gr. And ELD M in 180 gr first thing.

I see you recently posted part 2 so I wanted to see part 1. Most definitely a great powder in 308. I'm getting 3200fps in a 24" 308 with 130 TTSX

I have never found TAC to be anything close to match accuracy

I have found SW Precision to be as accurate as Varget in my 6 Dasher with Berger 105 Hybrids. I'm now working up a load for 6BR as well.

I had a situation like this with h4895 and some honady sx beans tweaked my seating depth and came up with a load that shoots bug holes I thought I completely missed the paper my second shot then I opened up the hole with my third just for proof

Don’t trust your chrono trust your paper use the center load and tweak your oacl cardboard will lessen the tear out I load 1 hole groups for all my rifles with many different powders

You may tweak the oacl and see if that tightens up your extreme spread

Technically, no a 5th shot won't, not by itself, but 4 or more groups of 3-5 (gun cooled down like you would expect it to be each time you go to the field) WILL make a difference in your assurance of accuracy. You said that flyer was you, but did you know that when you let off the trigger? Too many shooters take the blame for what's actually statistical noise. Hornady episodes 50 & 52 (entitled respectively "Your groups are/are still too small.") cover the truth about statistics in determining accuracy. The only thing small aggregate groups are truly valid for is weeding out bad loads or identifying other issues.

The PRS guys have been using SW Precision for a number of years now. Usually, SD and ES are lower than with Varget. BTW; Those rings are entirely too high.

Reloader 15 N40 They work . Try lapua brass , quality bullet .

I used to pay 20 per pound for this powder, but thanks to u-tube videos it's 60 dollars a pound or over!!!

Nice video. Consistent powder. I think that it helped with those longer bullets with good bearing surface.

No velocity readings, no standard deviation, no grouping by charge loads. Not a good sale pitch.

Seems like nice powder. Left is Left. Right is Right.

nice my range goes out to 720 yds.

Was buying this for 20 bucks a pound,now it's 60 to 70 bucks. That's how panic buying and hoarding drives the price gouging from the companies.

I came to love Shooters World powders years ago. Excellent performance and very low cost. In the early days, the biggest problem was load data. Availability is still an issue, as it seems that they only import it a few times a year. Unfortunately, the cost has skyrocketed, bringing it very close to the cost of more mainstream powders.

You can't have grouping with only one shot you could use any powder of any amount and it will still put a hole in the target, one shot tells you nothing.

Bullet weight and brand? you may have said somewhere in the middle I missed it.

Varget is always at the store I've never seen your powder.

I can't take that setup serious 😂

Absolutely a great video well done and nice grouping!

Is the bullet make and weight a secret?

Awesome job!! Thanks for the great video!! ( i made mine out of an old license plate and deck screws) 😂

Fantastic, I do love a bit of home engineering.

One of the best bedding jobs I.ve seen thank you for showing it😊