Відео

At www.ibcparts.eu

Hi! ibcparts.eu

Hi! Visit IBCparts.eu - the site is in multiple languages.

@@ibcparts thankyou so much

@@ibcparts in english ?

Of course, the connection system can also be suitable for drinking water, provided that the filtration is appropriate for this purpose. It's important to note that in any still water without added preservatives, microorganisms can proliferate, and if they are excessive, they can be harmful to health. Methods like UV filtration can be effective in ensuring the water's safety.

We can :)

@@ibcparts could you plz link me where I can purchase? I did visit your website but couldn’t see a option for the UK in Country/region

There are various types of threads on the valves, some more frequent than others. NPT is also amongst them. The S60x6 thread type is the most frequent in EU.

Dont stack 3, because the load capacity of the tank is 1200 -1650kg (depends on the type), so 2 is MAX. All openings can be completelly sealed, yes - they are designed this way and have gaskets in them.

Hi! Lower tanks are filled through the top two. So, water goes from the top container to the lower one and when lower one is filled to the top, the top container starts to fill. It works like if you would have one big 4000L tank.

@@ibcparts what keeps the bottom tanks from over filling? Do they all equalize

@@hotroda.5821 Hi! Venting ensures that the tank fully fills - without venting, it won't. It can't overfill because venting is designed with that in mind. You can find various venting solutions on our website and use the one that fits your needs.

it will, i presume the vent is higher than the top input

Hi! The top lids of the lower IBC's have to be vented. If they are not, the water will not fill the whole container. If they are just unscrewed, the top containers will not fill, because water will flow out through the lids...

Hi! We didn't test it for engine oil - that is not our field of expertise. The gaskets on the adapters can be replaced with EPDM or NBR material. The gaskets inside LDPE hose fittings are made from EPDM rubber and can't be replaced. Please check if that complies with your fluid. Either way, you do it at your own risk.

Hi! Here it is: ibcparts.eu/en/nakupujte/reducirji-in-prikljucki-za-ibc/camlock-prikljucki/hitra-spojka-camlock-%e2%80%8bza-ibc-cisterne-z-ventilom-fi-60mm/

Hi! PTFE tape should not be used in any adapter mounted to the IBC container. Every piece has its own gasket. We add an additional EPDM rubber gasket for our products.

We will make a new video, this one was made in a hurry.

ibcparts.eu

Hi Michelle! You can order it here: ibcparts.eu So far we only have one payment option - bank transfer. That will change later this year.

Hi Michelle! You can find that here: ibcparts.eu/en/product-category/sistemi-za-povezavo/

ibcparts.eu/en/product-category/ibc-cisterne-ventili-in-dodatki/pokrovi-in-filtri/

​@@ibcpartsI need two of these items.

@@user-sg5nm7gh2r Hi! You can purchase it here: ibcparts.eu/en/nakupujte/ibc-cisterne-ventili-in-dodatki/pokrovi-za-ibc-cisterne/tritonflex/

Thanks Dominic!

Hi! For example, you can simply line up bricks or some concrete squares of a suitable height at each corner. Provided, of course, that the ground is properly hardened - so that the weight of the tank does not cause the bricks to sink into the ground.

Hi! No, the pressure stays the same... You can increase the pressure with placing the tank higher. The pressure increases by 0,1 bar for every 1m of hight.

Ibcparts.eu

Hello, Raul! That is a good question, and one that I honestly cannot answer. Will try to find out.

@@ibcparts Thank you very much 🙏

Hi! Yes, of course. As many as you want.

Yes, from now on we also sell to the US. But for now we only accept bank transfer payments.