Відео

Hey man, I really enjoyed watching all this series, also helped big time rebuilding my S85. Thank you for this content as there’s no many videos out there about S85. I have just finished putting everything back on and started up the car first time, everything looked ok. I let the engine idle for 20 min then drained the oil, but I saw some glitters and shaving from the oil filter, I changed oil 3 times with 20 min idle and drained oil with same shavings and glitters. Is this normal or should I be worried and pull the engine?

I agree fully. The s m g is amazing in our v10 m5s

Very true. Where is all the S85 content?

That ultrasonic cutter works so incredibly well against Hella's permaseal (very tough to remove)

any updates?

If you were to get a face lifted E60 (the 2008-2010 style), you are pretty limited on headlights and tail lights when it comes to aftermarket support but if you’re careful and crafty at the same time, you can achieve the custom look on your 2008-2010 E60 and for me, I want to customize my headlights and taillights later on down the future

I own an E60 and BMW was ahead of its time with these tail lights. They're still my favorite and look as modern as anything else out there.

How did you set pre load on the spring ?

Good video. Was very intimidated by the prospect of having to retime the s85, but it actually looks pretty simple, even when compared to the s62. I think the only time this gets even remotely complicated is if/when you have to remove the units.

Just wanna let you know your videos have been of tremendous help when rebuilding my s85, its almost finished! Thank you!

Hey what happened to the follow up video you mentioned?

Can’t wait to get my M5 going 💰🤣

You should’ve had the MAFS unplugged so it would run without the plenum

Looks cool, carefully opened the lights. But there are 2 dubious points in my opinion, the first one had to be chemically removed from the chrome, soaking the inside of the lantern in chemistry overnight and then painting it. Secondly, it was probably worth assembling the lanterns not on double-sided tape, but on some kind of sealant, it will be more reliable and there will be no fogging, but here sealing will not work well. Anyway, well done, thanks for the helpful video.

How did you install rear crank seal ?

So if my bearing spun.. I have to replace thr connecting rod?

Look's geeat

Great video I bet a workshop wouldn’t take the time & care like you have so $7k is worth it in the end. I’m no mechanic but why torque something down & stretch it twice ? You’d think they would say torque it up to 30 then 60 then 90 ?

Good afternoon, I do all the steps with the tools that appear in the video, I rotate the engine and the exhaust tool on the left side that enters its location. Where can the problem be if it only happens with the exhaust vanos on one side? Thank you

y hook me up with the tune

Did you replace the cam shaft bolts? Or is that not needed?

nice job, looks great..is there any way to replace led bulbs on that red lines. i have issue on left side, the lines glow fainter

Hi nice job, can you put some new lenses on my headlights I have LCI

What are those led tubes(lines) called? From what material are they made of?

Which is the torq on the crankshaft for put in time ?

Did you have trouble with main bearing with walls ? It’s fits bad on my

Thank you everyone,!

Hi sehr gut gemacht, i like it

Hi, i have an s85. The timing was off, i removed the gears without timing tools, i tried for a 15 times with timing tool but no result at the exhaust cam bank 2. All the other ones are on time. I replaced the exhaust and intake gear. No result. Does the exhaust and intake gear have alighnment between each other? I dont understand why just the timing of the exhaust gear at bank 2 cames too late?

Will scotch brite remove old clearcoat from headlights?

Guys..when i have done this job i saw some sealant coming out on the outside of the engine in couple places...has anyone noticed that?

Mate, how did you scrape off the old sealant on the block? The brown sealant between the block and bed plate

mate, i am going though this process now...is it hard to do the vanos pump backlash?

Good job bro. sometimes it ain't about the cost, its the love that requires payments to be made. Most of the people that complain about cost, must pay someone to do the work.

in need to remove cyl head 6-10.....is it possible with engine in car

What website forum did you use to get the torque specs?

Looks great! Whats that tool your using to cut them open?

Great video will be trying this on my 550i e60

That was awesome mate. Just 1 question. How strong is the double sided tape that you used to stick back the lense cover? Will it stick for long term?

So i have a question how did u get the crankshaft done or did u send it to someone would u pls lemme know and how can I contact u so if u don’t mind tell me how u hot the whole job done thank u

Great job man. would u do my rod bearings and how much would u take if u will thank u. I live in utah,salt lake

Great video about the vanos! Can you explain how many rotations are needed or how can you tell that the exhaust cam spring has the right tension on it in order to screw in the back the temporary bolt for both of gears to line up? I didn't fully understood it from the video. Thanks!

made in china????????????

If I did vanos and rod bearings as soon as I bought one would I be ok for at least 50k with proper warm up of course?

Hi. Great to have guys like you going through the issues. I have E60 M5 and has issues. Won't cold start without ether, after that fine but is down on power. Finally threw a fault code (27b6). What I would love from anyone out there is what your V10 sounds/sounded like before you pulled apart.

What did your oil look like after that first change?.. Mine had a nice metallic swirl after the first break in oil change. Lol

Very interesting man ! Subscribed 👌🏼

So informative, how do I get access to this service manual? Thank you for this great content.

i feel the same way, the smg is an older tech, its not gonna be lightning fast. i feel like that's what gives the car character. same way people love the aventadors with the single clutch, and it kicks u in the back when u shift instead of being super smooth. i like stuff like that lol. agressive cars.

Great video. Im actually going to do my lci lights and was looking for a how to video... Great stuff 👌👌 What is the name of the heat thing you used to split the lenses apart?