Відео

Can you twist the top cap off of the cartridges on these? The scentfire cartridges the top can twist off and I can add more liquid to them. Wondering if these cartridges can do the same.

Hello everyone, can anyone tell me how long the engine is designed to last? How many miles does it last?

Had a similar issue with my OEM Mission bolt with Lumenok, say the same tool and video…only to find out the ‘new’ ones have a small hole that you insert something and lift up to turn off. Found this out AFTER I literally pulled the nock out of the bolt trying to pull/wiggle/twist and yank.

The forbidden cart

The lighted nocks are shit waste of money. Pissed me off how shit they work

Just put 80 gr of Smokeless in it

I built a small table using the wood from the shipping crate that mine came in. Used 2x2’s for the legs. Slides right over the motor. Protects it while also providing additional space for setting wood.

What ammo do you ?I have heard it dont like Minimags?

Next week, on Gunlist: lightly used muzzle loader, $100.

That is actually sick you got Horton limbs on ur wicked ridge, Horton is no longer made that’s something to keep forever

Your using just a floater jighead with no curly tail or body on it ?

Nice walleye that's where I be at catching walleye at

Nice walleyes have you ever fished the Maumee River walleye run

Have you compared this to the wyndscent 2.0.

I just bought both of those on Amazon. Can't go wrong with UTG in my opinion. Rugged products at a great price! I'm eager to try it out!

Had exact same problem. Gave up on lighted nocks. Ravin, why not develop a Hall effect switch using a permanent magnet to turn off?

Thanks for the info man. I have same issue with the limp seperate

Nice never seen the top speed on this thing! I can only get max 40 miles per hour on my property.

The video and subject matter are spot on! Because I want a lighted nock,what I did was also mentioned in your video. Emery cloth,sand the nock down until you can start it into the bushing at least 1/4 of the way by hand It still should be sufficiently snug while doing this step. Next pull it out “by hand”, and put string wax on it. It should be snug but not too tight!! You shouldn’t need to stand it on the ground to push it in. Use the alignment tool and push it in with your palm. Iight should turn on and that stupid ass extinguishing tool will work. Sucks but I open up all my packages of them lighted nocks and sand them ridges down then put them back in their packaging until needed. That’s when I apply the wax. Been working great for a long time! Just wish Ravin would pull their head out of their asses and do some quality control on the business end of the x-bows. Can’t realistically shoot anything consistently with a couple thousand dollar or more x-bow if the ammo “so to speak” is JUNK!!! Please Ravin,Try to argue that with your customers !!!!! Quality gets Respect Junk costs you more than you can imagine. Strings cables arrows nocks- you pretty much lost 90% of your customers by being money hungry! Now you lose!! And you lose a lot Stick that in your database

Are your parents siblings?

Go to Zombie they have all your bushings, I have the exact Bow. They hooked me up for less than half of cost.

I shoot them through a ravin r29x. It’s not hard to turn them off and you don’t need that tool. You do need strong fingers or a pliers. If you don’t have fingers as unbelievably strong and supple as mine, take your arrow, put some thick fabric over the noc or a couple layers of your t shirt or pants, old rag, whatever, and grab the noc with the fabric on it so it sits with the noc completely in the pliers running the same way as the arrow does. In other words the pliers will be coming straight off the arrow shaft. Then, squeeze the noc in the pliers while holding the shaft with thee other hand and then SLIGHTLY put pressure on like you are trying to snap it on half. JUST A TINY amount of force will turn the noc off. Takes literally 2 seconds to do.

I know this an old vid but dam 55 mph out a 376cc and it gets there kinda quick to, thats a stout lil wheeler.

That's quite a few serious issues for a $900 crosdbow. I was considering that model but after watching this video and another one with the cable issues I would like to revise my options.

TenPoint customer service is outstanding, I have been using them for years.

Waste of money. Don't bother it doesn't work. I've tried it since it came out. And it's never done a single thing g for me. Save your money.

Pull start parts are able to get the recoil and capacitor from suzuki all factory parts

What is the what is your dad

What’s your wheel setup

👍

Gotta a good spot there! Its always combat fishing when we go😂😂😂😂 👍👍 on the vid!

Thanks for the review. What are the name of those noise dampeners you used?

Would you be willing to show a Michigan guy the ropes this spring?

I'm getting my husband this bow for Christmas. What are those rubber things you put between to reduce vibration and noise?

Can you retrofit the wyndscent cannistwr to fit the scentfire

You think you can refill those cartridges?

Hey bubba how’s it holding up ?

I got that 10pt vise grip for my knocks and it works amazing thank you very much bro and HH this season

I'm use to just using regular bolts but got tired of losing them lol not cheap.. I have this tool that came with the new knocks but it doesn't do much because there so tight inside the bolt

Actually I got the replacement tips last week and just got knocks today and just tried to loosen the knock and it won't budge... I may try Cabela's dundee or bass pro in Perrysburg to check for that tool..

I just got lighted nocks for my r20 didn't get the THING that didn't work to shut it off for u...only thing I found was warm up the end so it's loose but still don't have a great way to finish turning them off other then vise grips or something.. but if u have a easier way now could u let me know

Never had any problems like what you are describing. Worst issue I had was an order I placed was going to ship a couple days before I was leaving out of state, ordered a week and a half before I was to leave. Had to cancel the order, which they did without question. Now, when they are cancelling orders without question, that there is great customer service. I ended up ordering what I needed from another source which it arrived the day before I left out of state. The only other issue I had was with their cube lights, the relay was not connected properly, I ended up getting a second set sent out which the relay was connected properly and so I had 2 sets of their cube lights for the price of one. The second set is now installed on my current truck.

What's the limit

Great video. I find it a bit confounding that Ravin can build an excellent compound bow - the bow is a work of engineering excellence. If they can build a crossbow, why cant they build a switch to turn off the lighted nock. I just don’t get it… Ravin needs to wake up and fix this.

Great idea.. might work good for my micro arrows.. probably just the right amount actually.. 600 plus is to much for but my arrows are smaller so that should work. Thanks

Nice walleye are you fishing the Western basin

any chance you have a service manual you'd be willing to share?

I don’t even shoot arrows but wow what a proper in depth review. Andy uk👍

Okay thank you

Nice walleyes if you don't mind where are you catching your walleye at on the rocks I would love to do this