- 177
- 501 176
malbor
Приєднався 7 чер 2006
Just a mix of videos on what I find interesting. Sometimes it's BBQ, sometimes it's animals, sometimes it's lights in the sky. Almost always it's at least interesting :)
Imbros Gorge Switchbacks from the Southern Shore of Crete
We visited the Imbros Gorge in Crete. If you come from the north side, it's some switch backs and such up about 9 miles. If you go to the south shore however, it's twisty, windy way for just a few kilometers! It's quite a ride.
Feel free to set it to 1.5x or better for the fun of it :)
Feel free to set it to 1.5x or better for the fun of it :)
Переглядів: 49
Відео
Chania lighthouse, Chania Greece. 9/7/23
Переглядів 25Рік тому
Chania lighthouse, Chania Greece. 9/7/23
Waves in Chania bay, Northern shore of Crete in Chania Greece.
Переглядів 33Рік тому
Waves in Chania bay, Northern shore of Crete in Chania Greece.
Had to cut one of my palm trees
Переглядів 99Рік тому
The palm had what is called "butt rot" GANODERMA BUTT ROT OF PALMS Ganoderma butt rot is caused by the fungus Ganoderma zonatum. This fungus degrades the lignin in the lower 4-5 feet of the trunk. It does not cause a soft rot, so the truck seems hard. -All palms are considered hosts of this fungus. This fungus is not a primary pathogen of any other plant family. -Symptoms may include wilting (m...
Extremely loud helicopter(s) at 2:14 AM. 1-27-23 over the Villages
Переглядів 865Рік тому
This or these helicopters were very very loud. Helicopters are normal and loud. This was something else. I was waiting for the lights and the Close Encounters theme to start playing.
How not to make a left turn
Переглядів 342Рік тому
Griffin Avenue and 27/441 Doh De Oh by Kevin MacLeod is licensed under a Creative Commons Attribution 4.0 license. creativecommons.org/licenses/by/4.0/ Source: incompetech.com/music/royalty-free/index.html?isrc=USUAN1100255 Artist: incompetech.com/
A woman hits a fire extinguisher
Переглядів 57Рік тому
Interstate 95 North, Around Exit 52/53 in Virginia. 12/21/22
Almost hit on Interstate 95
Переглядів 188Рік тому
Driving North on Interstate 95, 12/21/22 Just before the Delaware Memorial Bridge. I've munged the sound because the radio triggered a copyright match. Truck almost hits us and causes chaos behind us. We're a few miles from the Delaware Memorial Bridge.
Merging onto the Turnpike in Florida truck nearly runs us over
Переглядів 322 роки тому
He had a lane, decided he wanted ours.
Fire Rainbow over central Florida - 7-4-22
Переглядів 432 роки тому
Taking the dog for a walk after the 4th celebration and there was some fire in the sky!
Club Car Precedent Brake Pedal Pad replacement 2004 and up
Переглядів 1,1 тис.2 роки тому
Club Car Precedent Brake Pedal Pad replacement 2004 and up
UFO over The Villages Florida. 8/11/21
Переглядів 3823 роки тому
UFO over The Villages Florida. 8/11/21
Vehicle Fire, Interstate 95 North Bound, somewhere in South Carolina. 5-8-21
Переглядів 353 роки тому
Vehicle Fire, Interstate 95 North Bound, somewhere in South Carolina. 5-8-21
Smoking a brisket on a pellet smoker using beef tallow.
Переглядів 2,4 тис.3 роки тому
Smoking a brisket on a pellet smoker using beef tallow.
Low and Slow Chuck Roast for pulled beef on Pellet smoker
Переглядів 1,6 тис.4 роки тому
Low and Slow Chuck Roast for pulled beef on Pellet smoker
Stop Soldier Suicide supercars driving past my house
Переглядів 674 роки тому
Stop Soldier Suicide supercars driving past my house
Roaster Chicken cooked on pellet grill
Переглядів 154 роки тому
Roaster Chicken cooked on pellet grill
2004 Dodge Ram 3rd Generation Control Arms repair
Переглядів 7 тис.4 роки тому
2004 Dodge Ram 3rd Generation Control Arms repair
I made an even more detailed (but crudely shot) video on how to remove the seats! ua-cam.com/video/s8se7Cnecg8/v-deo.htmlsi=uemM7QDzbL8knbwb
❤️❤️❤️
Race someone! Lol
You are cooking your beef like it's pork. You are doing it totally wrong and I love it! I like how you had the confidence to use those seasonings. Everyone says those are for pork. They say to use pepper salt garlic onion on beef. I have one on the smoker right now. I'm going to run out and add that apple seasoning on half of the roast right now. It's my favorite for pork, never had the balls to use it on beef. Thank you!
You are a lifesaver!!
Looks overcooked lol
It was wonderful ;). I have made many more since using pretty much this without the extra grease.
Do you know if a 2006 HVAC (heater box) module will fit my 2003? Both being dual zone of course.
Best blend door install that I have seen.what kind of tape is that you used to patch up the cut outs.?
HVAC Aluminum foil duct tape. The kit from heater treater included it. You can also buy it at any big box store and probably most hardware stores.
Hi, can I use this clip on my channel please?
Sure, have at.
Fluid film the hell out of underneath it will stop the rust dead . Messy when working but rust problems disappear. That stuff creeps so good boots and nuts come right out
Get well soon.
Hey I have exact same car and same problem, did you find the point of entry?
Came through the cabin air filter, so through the air entrance which I've never spent time to find.
@@malbor it’s right above the engine air filter I put a piece of steel mesh and screwed it in with self anchoring 1 inch screws
*PromoSM*
Can I ask an honest question? When I drive in Corolla seats my right butt cheek kills me. Probably siatica. What causes this? I think the Corolla seats are just too soft but idk
NOOOOOOOOO is what I thought when u mentioned the rodent
😂
Hey ! May I use your clip in my video with credit and link ? What happened before-after this ? Where did this happen ?
I have that setup at a beach house in Mexico, can't hear it it's near the street terrain is pretty long. Runs the whole house with 4 ac. Automatic transfer switch.
I did the same upgrade. Gained near 2~sec reduction in unloaded round trip time of the ram. As the old engine was 3,200rpm And the HF is 3,600rpm wide open.
Can I also use this one too
Yeah, sure.
Can I use this one too
Knock yourself out.
CAN i use this video on my channel?'
Sure. It'd be nice if you include the follow up from the Riverdale police officer who called and thanked me. ua-cam.com/users/shortskfIlce-H824?feature=share
this was soooo...helpful man and I thank you much o grande..
Much appreciated
Thank you
Next time you have a seized threads do this you'll never do anything else... Get bolt hot smash a candle into it until you get liquid wax coming through threads and give it a go... Thank me I n a video...
Ha, I just watching this and thought what if I just jostled it enough to break them and picked up the shovel with it plugged in and dropped it lightly (but with some force) on the bottom and sure enough it cracked free the brushes and works again without having to take the rig apart. Might try to do that if you want a possible solution that doesn't require doing much. I just have to remember to plug this in periodically and run her to keep it alive - it had been a year+ since I'd used it. They are awesome when running great.
Thank you for posting.
Hi! Can I include this video in my new compilation? In the description I will put the link to Your channel, while the name of your channel will be put in the compilation. Thanks 😀
Sure, go ahead. You know there's another vid on my channel of a woman hitting a fire extinguisher? I uploaded on the same day.
@@malbor Yes, can I use it too?
Yes, go ahead
Hey malbor, can I feature it in a dashcam compilation? Credited of course. I will be waiting for an answer.
Yes, feel free.
Hey malbor, can I feature it in a dashcam compilation? Credited on screen & link in description.
Feel free.
I had the pleasure of installing them on my old 2006. Those doors are very well engineered and constructed. And their instructions were 100% on point. Your vid was great for installation - I am planning on doing my doors on my 2004.5.
I heard folks say to do it the right way...well doing it this way is easier then having to disconnect battery along with other connectors around the front dash along with steering wheel with air bags and the one Infront of passenger side. But doing the work like this is great and cheaper since shops charge way too much an some do it just like this and still charge you high dollar for letting them work on your vehicle. Great job👍🏼
I just got mine off my Silverado. Using the Sawzall with a Diablo Carbide Blade and air chisel. Some heat too helped. PB Blaster didn't do shit.
How many lots lizards can fit in that cab?
Your fault for waiting so long to stop!! Delayed braking will get you rear ended!!!!!
Uhm...the car in front hard stopped. All I did was make sure I didn't hit it. The law is "assured clear distance ahead". I had it, the Jeep didn't.
@@malbor if he stoped hard then you should've known!!!!!!! Fuck!!!!!!!!!!!!
Wrong. Each driver is responsible for their own gap. The Jeep was clearly not paying attention.
I have that exact same grill and just pulled a brisket off it
thanks 👌
If looking for replacement bushings, these are referred to as "Track arms". The control arms are the ones that control up and down movement.
The issue is that the service manual calls them a "Suspension arm" and if you look for parts on suspension arms on Rock auto for example, you'll find the control arms as well as suspension arms. If you look for the "control arms", you'll find these suspension arms too. The manual does not refer to them as track arms. The track bar is something else entirely.
I know this is an older video, but would you happen to know what the part# wouldve been for the 2 door kits. That was below the radio. Or was they both the same? Having difficulty trying to get these. Thanks
Hi, the parts are still available. heatertreater.net/dodge-ram-02-08 The area below the radio uses the mode1 and mode2 doors. I have no connection to that company but the hvac was still fine when I sold the truck last year.
Thanks a lot Bud.. This helped me fix my Toro Curve 1800.. It was just the connections I changed the frets and cleaned the connection.. I really appreciated this video.. Have a great day!
The motor in my 1800 stopped. Took it apart and had exuberant arcing between the brushes and commutator. Shocked to see how exposed the motor is to the weather. Cleaned as much as I could (brushes/commutator). It works but still have arcing. Hopefully it will get through this winter.
Wow...that's some serious wind and rain! Big like from me!
This is awesome! Love the Scooby song! I watched it twice!!
Wow...done to perfection!
I’m having problems getting hot air to flow. So looks like I need to do this sooner or later. Did you put the pieces you cut out back in place or just discard them and tape over everything??
I taped the original pieces back in. If you follow the heater treater kit instructions, it leaves some decently strong attachment points. For the record, I sold this truck back in June. The flaps and the HVAC were still working fine after 6 years. I know some people consider it a hack job, and it is. That said, not having to evacuate the AC and having a dash that doesn't rattle because it's not been out was worth it to me for this.
@@malbor I’m sure you can take your time a bit and cut it more cleanly??
@@ty6896 Probably. I used a dremel. Shrug. It was a utility truck for me, but in the end, it really didn't make any difference how it was cut. I cut it, replaced the flaps, taped it back up and it was rock solid for 6 or so years.
how did u make it angle itself?
I added a crossbar to the main shaft and used pulleys on either side of the crossbar to connect a cable to a vertical mounted winch. I ran the cable through the winch so that it fed and let out the same amount of cable no matter which direction it turned. I then added limit switches to stop the winch when I hit end of travel. It worked. The problem was the cross bar was not stout enough and unless the winch was at one side or another it would stress the crossbar. Ultimately I had enough bend in the cross bar that I lost much of the travel. It also added about 40lbs to the setup making it somewhat heavy to put into the hitch. I ended up taking all of this off and bought the winch provided by snowsport. It was a fun engineering experiment and it could have been enough, but spring rolled around and other projects got my attention. I've since moved to Florida, so I sold the truck and plow a few months back.
You can see more here: ua-cam.com/video/wPlQQG3NN10/v-deo.html
So how does it sound from inside the house?
You can hear it, but you can't have the TV on or something else going. It's on a side of the house where there are two rooms we didn't spend any time in. If you were in either of those, it'd be louder of course.
@@malbor You CAN'T have the TV on?!?! That's f@king LOUD!!!
Hello, is it alright to use this footage in my new compilation? Credited :)
Sure, no worries.
Couldn't you have just washed your filter
It's a paper filter, so, I dunno, maybe. They are like $14 bucks. Not a big issue for 20000 miles or so.
@@malbor I wound up ordering one off Amazon. Thx for the content