Відео

it worked, thanks!!

Great tutorial for setting up the Z axis. All worked first time. Keep the good work.😃

I fixed it in 2s with a knife, just stuck it under the plastic where the plastic is moved it around a bit and worked like magic.

I have the problem that you indicated in the minute 11:37, double printing and deformed circles, I did everything you indicated but it remains the same, is there something to configure in grlb?

thanks worked. best mouse out there

you made my day! GRAZIEEEEEEEEE

Good video but I can't download the setup files any thoughts? No ad blocker and tried 2 different browsers.

How do you do that? I can’t get mine to and no one will help me

I got this to work on an Xtool S1. However, I am limited to the distance I can set the camera permanently as I have to maintain clearance so I can open the lid. I guess removing the lid and getting some laser glasses might be an option. I don't want to fix anything permanently to the laser enclosure. Any Ideas?

I also use Neje E40 but why don't I get the same results, how do you set up the device? or settings in the software

Good job!

Hi, great video! I am trying to download the kerf files you posted but your website is not opening. I keep getting an error. Is there another link I can use or another website or another alternative to getting the files to test out? TY

How about its performance when it comes to cutting the stainless steel sheet?

thank u so much, my trimming stopped working on movies & tv and this one works perfect

great video. I've had the problem for a while and would just squeeze the sides of the mouse really hard and it would fix it (the pressure allows for the release of the stuck thumb button) unfortunately it has been getting worse. currently I just make sure all my devices have the button disabled within the logitech app. will do this later when I replace the usb port with usbc.

Thanks this fixed my issue also, good video!

FUCK MAN, 15 MINUTOS FOR EXPLAINING THIS SHIT?

Dziękuje za pomoc, naprawa została zrobiona tak jak na filmie i zadziałało. Dziękuje.

thanks not work )

Thank you saved my mouse!

Is there nowadays an easier way to do the job? With another software?

Fantastic explanations. To the point, with clear examples

Hi, loving the video, thank you, Have finally decided on which diode cnc I would like to get, thanks to your video, and its the NEJE Max 4, having looked at a number of review videos now, this one seems to tick all the right boxes, have a question I need to extend the size, I know NEJE do an extender pack to take it up to a 1150mm, but I need to go up to 1500mm to cover the size of the material i am going to cut, got in touch with NEJE to ask if they could supply a set of rails 1500mm, they just kept coming back with we do an extender pack 1150mm, they did tell me the rail dimensions, 20x30, but I dont seem to be able to find that size, can you help or suggest where I might be able to get that size rail in that length, any help would be much appreciated, keep up up the great work, Stu in the UK

I spent nearly 1h dealing with Logitech customer service, just to be told I was out of warranty and needed to buy a new mouse. I only managed to get a discount from them to buy on their website. So, I looked on youtube and found this video. Without much hope I tried this, and it absolutely worked. Now I have a discount and my old mouse working 😊 Thank you!

شكرا لك، لقد كنت ابحث عن هذا الفيديو ✨

This is the best grbl Laser video ever. Simple and helpful. Thank you🙏

Legit 100%

❤❤❤

Pin out?

How would you do this with a decal so you can laser and image (png) onto a curved surface? This was very helpful, thanks!

Hi, this is a great video and if my Max 4 worked like this it would be awesome! However, my Max 4 appears to behave differently and I wondered if you might be able to help? I have followed the setup exactly as described. I determined the focal length on my E80 to be 24mm, and my distance from honeycomb to laser is 66mm... so the difference is 42mm. When I enter an offset of "42 - thickness of workpiece" into the offset for the layer(s) it works perfectly. However, when I code the GCode entry (G10 L2 P1 Z-42) the coding is accepted, and $# shows [G54:0.000,0.000,-43.000,0.000], but when running the job, the Z axis does not move down at all. I've rehomed, powered off/on and checked the firmware and version of Lightburn (v1.6.00). I'm not running in absolute mode and I have double checked that Z-axis is still enabled - I can still jog it up and down... Do you have any clues as to what else I could look for?

Wow, this has worked perfectly on my MX Master. This is crazy.. basically a jammed button stops everything. I had to use an old wired mouse until I buy a new one but i looked up the issue and I wasn’t alone. Thank you for the advice!

You saved my mouse! Thank you!

🙏 thanks for the video. I tried to engrave mirror stainless steel with my neje master 2 s plus 30 W and it doesn't work. Do you have any advice for me please ?

Thank you so much

Perfect explanation, my mx master works fine now.

Hello my friend I have a question please What is the appropriate height to put for the camera, I mean how high is the wooden pole that you installed the camera on?

Hello from Portugal! This video is amazing!!!!! I have a sculpfun with light burn installed. I'm gonna do this! Thanks so much! I'm Subscribe immediately! So cool! Thanks a lot!

thank you

Thanks for the very thorough video. Well done. Thumbs up and a subscribe.

I just wanted my mouse to work and this did it! Thank you

Hi, I have an atomstack s20 max. The power of the laser is 18-20w. They cannot cut plexiglass (acryl) 3 mm at all. Is the problem that the laser power is low, or did I not set good parameters for cutting? I use the lightburn program

super DANKE !

Didnt work for me. Even after removing the thumb button pcb and moving the bluetooth dongle closer, it still lags/loses connection with irregular intervals.

it works,, thank you very much

Te problem I have with my Longer B! is when it homes it will off from the previous home, its never exactly the same each time

Thank you, this was super helpful. I will be watching your other videos as well.

My bios is on the 2020 version so ty had to turn of virtualisation

My question is how did you get the machine to engrave in a circular manner vs x axis motion then step up in the y.

Best