LINNPOWERSTUDIO
LINNPOWERSTUDIO
  • 33
  • 8 246
How to securely mount the EVO MK 1 Truck
EVO MK-1 Truck Mounting | Tools & Steps
Tools We'll Need:
- H3 Hex Key
- 3/8-inch Combination Wrench
Step-by-Step Guide:
1. Internal Mounting Nut:
- Place the nut into the CNC-machined recess on the truck baseplate.
- Hold the nut in place with your hand.
- Use the H3 hex key to start the truck mounting screw, but don't tighten it fully yet.
2. External Mounting Nut:
- Hand-tighten the screw and nut on the outside of the truck baseplate.
- Hold the nut steady with a 3/8-inch combination wrench.
- Use the H3 hex key to secure the screw, but again, don't fully tighten it at this stage.
3. Tighten Sequentially:
- Tighten all screws in a sequential manner to ensure even tension and avoid warping.
That's it! You've got the essentials for mounting your EVO MK-1 truck. For more detailed walkthroughs and tips, stay tuned to our channel. Happy Rinding! 🛠️💨
👉 Subscribe now and turn on notifications to join us on this thrilling journey. Be the first to know as we unveil the future of electric skateboarding.
🔗 Join the conversation with the LINNPOWER community:
Instagram: linnpowerstore
Facebook: linnpowerstore/
Facebook Group: groups/linnpower
Official Website: linnpower.com/
Переглядів: 259

Відео

How to change EVO MK 1 from a belt drive to a gear
Переглядів 224Місяць тому
To change the EVO MK-1 from a belt drive to a gear drive, follow these steps: Tools Required: - H2, H2.5, H3, H4 Hex L-Key - T-tool - Motor puller - Gearbox kit - Gearbox grease Steps: 1. Remove the Rear Wheel*: - Use the T-tool to remove the nuts holding the rear wheels. 2. Remove the Pulleys and Instaoll the Wheel Adapter: - Use an H3 Hex L-Key to remove the motor pulley screws. - Use a motor...
How To Pair The New Remote With LINNPOWER Board
Переглядів 1122 місяці тому
EVO MK-1 LITE & Pro Setting: MOTOR TYPE: BELT; WHEEL DIAMETER: 190; DRIVE RATIO: PRO: 4.3; LITE: 4.0; MOTOR POLE PAIRS: 7 👉 Subscribe now and turn on notifications to join us on this thrilling journey. Be the first to know as we unveil the future of electric skateboarding. 🔗 Join the conversation with the LINNPOWER community: Instagram: linnpowerstore Facebook: linnp...
Keep the Motor Wire Away From the Motor
Переглядів 1132 місяці тому
👉 Subscribe now and turn on notifications to join us on this thrilling journey. Be the first to know as we unveil the future of electric skateboarding. 🔗 Join the conversation with the LINNPOWER community: Instagram: linnpowerstore Facebook: linnpowerstore/ Facebook Group: groups/linnpower Official Website: linnpower.com/
How to Maintain the LINNPOWER V4.3 Gearbox
Переглядів 1503 місяці тому
The LINNPOWER V4.3 Geardrive Kit has been on the market for two years, with thousands of units sold and many riders having ridden over ten thousand kilometers. This video offers a simple guide to maintaining the gear drive system and important tips to keep in mind. How to Maintain the LINNPOWER V4.3 Gearbox: Lubrication: Add grease through the motor gear hole by removing the five motor screws, ...
How to Replace the Hobbywing Remote Frame with LP’s Kit
Переглядів 3033 місяці тому
How to Replace the Hobbywing Remote Frame with LP’s: Tools Needed: - H1.5 Hex Key Open the Remote Case: Use a Phillips screwdriver to remove the screws from the Hobbywing remote control case. Carefully separate the sticker from the remote control case. Handle Components with Care: Note the button orientation; the LINNPOWER logo indicates the function button. Keep the small spring from the origi...
How to install LIINPOWER Footstop
Переглядів 1103 місяці тому
How to Install the LINNPOWER Electric Skateboard Footstop: 1. Insert Screws: Insert the M5*30 hex socket head screws from the packaging through the indicated position on Footstop Part A. 2. Remove Truck Screw: Remove the rear mounting screw of the front truck. Insert the M5*45 hex socket screw from the package through Footstop Part A and the truck mounting hole. Lightly secure the screw from th...
How to Attach MBS or Trampa Bindings to the EVO MK-1 AT Electric Skateboard
Переглядів 1704 місяці тому
How to Attach MBS or Trampa Bindings to the EVO MK-1 AT Electric Skateboard Gather Your Tools and Hardware: MBS Bindings or Trampa Bindings M5*10 or M5*12 screws (Note: The stock screws for MBS and Trampa bindings are M6, so you’ll need to purchase the M5*10 or M5*12 screws separately.) Steps: Deal with the Binding fix hole on the deck: Use a utility knife to carefully cut open the binding hole...
How to Adjust the Bushing of the EVO MK 1 Channel Truck
Переглядів 2794 місяці тому
How to Adjust the Bushing of the EVO MK-1 Channel Truck Tools Needed: - H4 Hex Key Step-by-Step Guide: 1. Locate the Bushing Adjuster: The bushing adjuster is located on the hanger of the truck. You’ll need to use the H4 Hex Key to make adjustments. 2. Adjusting the Front Bushing: - Clockwise Adjustment: Tightens the bushing, which will increase the turn radius and make the board feel more stab...
EVO MK-1 Electrical Parts: Enhanced Safety & Reliability
Переглядів 4624 місяці тому
EVO MK-1 Electrical Parts: Enhanced Safety & Reliability
EVO MK-1 V4.3 GearDrive
Переглядів 6294 місяці тому
EVO MK-1 V4.3 GearDrive
EVO MK-1 Remote: LINNPOWER X HOBBYWING Reliable Remote
Переглядів 1914 місяці тому
EVO MK-1 Remote: LINNPOWER X HOBBYWING Reliable Remote
EVO MK 1 Deck with Patented Embeded Nut Structure
Переглядів 1764 місяці тому
EVO MK 1 Deck with Patented Embeded Nut Structure
EVO MK 1 Quick Release Hub and Reliable Channel Truck
Переглядів 1644 місяці тому
EVO MK 1 Quick Release Hub and Reliable Channel Truck
LINNPOWER EVO MK-1 FlexVolt Pack Unveiled
Переглядів 1884 місяці тому
LINNPOWER EVO MK-1 FlexVolt Pack Unveiled
Unveiling What Makes LINNPOWER EVO MK 1 Superior
Переглядів 3254 місяці тому
Unveiling What Makes LINNPOWER EVO MK 1 Superior
A Glimpse Behind the EVO MK-1: Production Process
Переглядів 3894 місяці тому
A Glimpse Behind the EVO MK-1: Production Process
EVO MK-1 Assembly Guide
Переглядів 3784 місяці тому
EVO MK-1 Assembly Guide
LINNPOWER EVO MK 1: Coming Soon
Переглядів 965 місяців тому
LINNPOWER EVO MK 1: Coming Soon
How the Linnpower Quick Release Hub's Bearing Quick-Removal Operates
Переглядів 1265 місяців тому
How the Linnpower Quick Release Hub's Bearing Quick-Removal Operates

КОМЕНТАРІ

  • @dleebox2268
    @dleebox2268 29 днів тому

    I really like this board, waiting to see if there will be a bigger battery 25ah in the near future🙏🏼🙂

  • @Joshua-w1k
    @Joshua-w1k Місяць тому

    Would be nice to see a more detailed v8deo on bearing removal, install is easy, it's the removal that needs attention, thanks

    • @linnpowerstudio
      @linnpowerstudio Місяць тому

      Just take care not to tap the bearings directly when removing them. Use a flathead screwdriver or allen key to gently push one side of the bearing out, then simply push out the other side by hand.

    • @linnpowerstudio
      @linnpowerstudio Місяць тому

      Hi Jushua, I think that's the video you need: instagram.com/reel/C4ctnwsuK5p/?igsh=MzRlODBiNWFlZA==

  • @dleebox2268
    @dleebox2268 Місяць тому

    What are the specs on the motors? How many wats per motor?

    • @linnpowerstudio
      @linnpowerstudio Місяць тому

      This is the Hobbywing 6370 motor, which offers performance comparable to other brands' 6374 motors, but in a more compact size. Each motor has a peak power of 3641W, with an actual operating power of 1764W per motor.

  • @devindimas8868
    @devindimas8868 Місяць тому

    Say one doesn’t have this amazing device ? Haha

    • @linnpowerstudio
      @linnpowerstudio Місяць тому

      Experienced riders can still replace it, but it takes time and may damage the wheel.

  • @robras2850
    @robras2850 Місяць тому

    An awesome board no doubt.

  • @arranwilliams2523
    @arranwilliams2523 2 місяці тому

    Beautiful build looks like an absolute weapon!

  • @fed9_2-ps7cr
    @fed9_2-ps7cr 2 місяці тому

    How long will the Pom gear last before replacement?

    • @linnpowerstudio
      @linnpowerstudio 2 місяці тому

      If the bearings are not damaged, they can be replaced after 10,000 km of riding

  • @jagg007
    @jagg007 3 місяці тому

    I get mine tomorrow! 😁

  • @LEON-Cyborg
    @LEON-Cyborg 3 місяці тому

    I'm betting some customers were complaining about this issue 😅😅😅

    • @linnpowerstudio
      @linnpowerstudio 3 місяці тому

      Yes, we did receive a feedback from a customer regarding the motor wire, which prompted us to look into the matter further. Upon reviewing the photos shared by our customers, we noticed that the arrangement of some motor wires could be improved. That's why we've reached out via email to remind every customer to check this aspect. While assembling the board by oneself can be fun and informative, it does have its drawbacks. To address this, we will be assembling the units for the upcoming batches before shipping them out. ☺

    • @LEON-Cyborg
      @LEON-Cyborg 3 місяці тому

      @@linnpowerstudio Good call.

  • @krustov
    @krustov 3 місяці тому

    Beautiful shorts! ❤ 😘

  • @michaeldietz8108
    @michaeldietz8108 3 місяці тому

    Helical gears please!

    • @LEON-Cyborg
      @LEON-Cyborg 26 днів тому

      Question: What's so great about Helical gears compared to other gears?

    • @michaeldietz8108
      @michaeldietz8108 26 днів тому

      @Duality-Modem much lower noise

  • @Jason_Music
    @Jason_Music 3 місяці тому

    Nice !! How to open it again it case it's needed (like change the battery)? It seems to clip and closed into place even without the screws.

    • @linnpowerstudio
      @linnpowerstudio 3 місяці тому

      Since we use dual bearings for control, the precision of our components is high. This may give the impression that the remote control case can be held together without screws. However, screws are still necessary to secure it properly. When you need to open it, simply remove the screws and gently pry open the remote control case.

    • @Jason_Music
      @Jason_Music 3 місяці тому

      @@linnpowerstudio It would have been good to include a little a allen key to go with the screws you provide to close the box. It's a very small size allen key and not a commun type. Honestly I think philips screws would have been a much better/safest choice to use. Overall quality is good though.

    • @linnpowerstudio
      @linnpowerstudio 3 місяці тому

      @@Jason_Music 😊Thank you for your advices! I compared T-head, Phillips, and hex screws, and ultimately decided to switch to hex socket head self-tapping screws due to their higher strength and better grip, reducing the risk of slipping. We will consider adding an Allen key to the packaging in the future.

  • @eBoard3R
    @eBoard3R 3 місяці тому

    *Yewwh!* 🤙🏽⚡️🤟🏽⚡️👌🏽

  • @jimbo4068
    @jimbo4068 4 місяці тому

    I get mine today!!🤙🏼✌🏼

  • @jimbo4068
    @jimbo4068 4 місяці тому

    It arrives this evening!!! My Mk1 Evo pro🤙🏼

    • @LEON-Cyborg
      @LEON-Cyborg 3 місяці тому

      How is it? How does it make you feel?

    • @jimbo4068
      @jimbo4068 3 місяці тому

      It’s nice a big deck with good flex and wide trucks easy for me to turn. White bushings in front and red in the back as it is delivered. Eaven stable at speed. I have a blast rideing it!!

  • @Catamount19
    @Catamount19 4 місяці тому

    Awesome so MBS bindings will work with the hole pattern.. awesome.

    • @linnpowerstudio
      @linnpowerstudio 4 місяці тому

      Yes, both MBS and Trampa bindings are compatible with EVO MK-1's deck, but rider will need M5 screws to attach the bindings to the deck properly.

  • @vd2212
    @vd2212 4 місяці тому

    Can u pls stop sucking ppl dry in the nordic countrys? $290 for shipping the evo mk-1!?!?

  • @mostwantedpakbusu
    @mostwantedpakbusu 4 місяці тому

    show us how to use the foot stop

    • @linnpowerstudio
      @linnpowerstudio 4 місяці тому

      OK, which skateboard are you planning to install our footstop on? Could I have your email for further communication?

  • @LEON-Cyborg
    @LEON-Cyborg 4 місяці тому

    Yes, I damaged my remote controller after a hard landing. It was The Ruckus Propel EV controller.😢 Btw, I hear the EVO Mk-1 has difficulty curving. Is that true? How can you guarantee a smooth riding experience?

    • @linnpowerstudio
      @linnpowerstudio 4 місяці тому

      The EVO MK-1 is an AT board equipped with channel trucks and features LINNPOWER's custom integrated bushings. These bushings enable very tight turning within the channel truck, and excellent turning capabilities have been praised in every review. Replacing the rear bushings with 75A white bushings will make the turning even more agile, which riders accustomed to DKP setups find very comfortable after trying this setup. Additionally, we have designed an adapter for the EVO MK-1 that is compatible with Riptide LaCroix bushings. With this adapter, you can get softer bushings from Riptide for even more flexible turning. Our attention to every detail ensures a smooth riding experience, and this is what we aim to convey through our video.

  • @LEON-Cyborg
    @LEON-Cyborg 4 місяці тому

    Quite intresting. Does it include a damping system that allow a smooth riding experience?

    • @linnpowerstudio
      @linnpowerstudio 4 місяці тому

      Hi there! While we don't use hydraulics, our flexible deck, flex battery pack, and flex battery enclosure, combined with the 17.7" channel trucks and integrated bushings, offer a smooth and stable ride. Enjoy the comfort and control!

    • @LEON-Cyborg
      @LEON-Cyborg 4 місяці тому

      @@linnpowerstudio Even so, I would love to see the next-gen installed with state-of-the-art hydraulics.

    • @stevelocke3667
      @stevelocke3667 Місяць тому

      Most reviews seem to think that these are kinda noisy, even though gear drives are supposed to be quieter than belts.

    • @linnpowerstudio
      @linnpowerstudio Місяць тому

      @@stevelocke3667 Yes, the V4.3 gearbox uses straight-cut gears, which makes the gear drive version of the EVO MK-1 louder in operation compared to the belt drive version.

    • @stevelocke3667
      @stevelocke3667 Місяць тому

      @@linnpowerstudio - is there any way to quieten it? Different grease maybe?

  • @jimbo4068
    @jimbo4068 4 місяці тому

    Beautyful parts, design, and dyi toughts!!👏🏻🤙🏼

    • @linnpowerstudio
      @linnpowerstudio 4 місяці тому

      Thanks! 🙌🙌The designer is also a big fan of DIY, so when designing the EVO MK-1, he considered the possibilities for future rider DIY projects.

  • @1BlackHammer
    @1BlackHammer 4 місяці тому

    I definitely want one of these! I loved it at Esk8con!

    • @linnpowerstudio
      @linnpowerstudio 4 місяці тому

      Awesome! It's great to know that EVO MK-1made a positive impression on you. If you have any questions or need more information, feel free to ask. We're here to help you get your hands on one! 🛹💨

    • @1BlackHammer
      @1BlackHammer 4 місяці тому

      @linnpowerstudio I do not have a super huge UA-cam following yet, but I would love to do some videos on this board. I have always been a fan of the lacroix style board, but I could never justify the price. This is a dream board for me.

  • @krustov
    @krustov 5 місяців тому

    I can't wait 😍

  • @eBoard3R
    @eBoard3R 5 місяців тому

    *Yewhh!!* 🤙🏽⚡️🤟🏽⚡️🤙🏽

  • @krustov
    @krustov 5 місяців тому

    🤩