Відео

Yes you can as shown in the video

Hello, yes you can use the same method but without washing or soaking the sponges because the washing and soaking process is for the cartridge that has been left for a while and the ink does not come out of the nozzles. As for me, I prefer to buy a Canon printer from the G generation (cannon pixma G2470) because it is refillable.

@greattechnical_AH thanks for your response and helping us very well. But I have 1 more question that some peoples says that after refilling canon pixma cartridges for 2-3 times canon printer block that cartridges by knowing that it is refilled cartridges because of violation of their cartridge selling techniques. Does it true or it just a myth.

Hello, I am very happy to help you, and from my experience it can be considered just a myth.

@@greattechnical_AH Thank you very much for your response I am very grateful for your response.

I think that one of the colored cartridge nozzles is faulty (yellow or blue) because the green color is a result of mixing yellow with blue. Try cleaning the nozzles by placing the head of the cartridge in water at a height of half a centimeter and be careful and avoid getting water on the contact points on the cartridge.

Hello, I'm sorry, I didn't understand the question.

Yes, if you clean the cartridge only, it will work on the Canon IP7200 printer because the cartridge in this type of printer is only one and the tanks can be filled separately.

Thank you for taking the time to reply, I will busy myself refilling ALL of my old cartridges, and the result will follow ... eventually

Hello, I am very happy with your comment ,your printer type does not need to be refilled in this way because the printer (canon pixma g2410) contains ink tanks that can be filled when they run out .But you can follow the same method to clean the cartridges.

Tell me the results

I pulled the fans out easily as shown in the video, because they are fixed with a plastic ring on the other side. There is a possibility that the Cooling fans are not original.

I ended up using adjustable pliers to grab the center of the fan blades and easily pull them out. I cleaned and lubricated it, got rid of the noise, but now I have a 2 cm piece missing from one of the blades. It still works, but i have to replace the fan eventually. If I had known how fragile the plastic was and that the blades are that fixed into the bearing and not designed to come off as easily as shown in your video, I could have saved my fan. I was shock to see the bladed chip away by such little force applied.

You are welcome, I am happy with your comment.

Try to reinstall the cartridge correctly, ignore the indicator and try printing after that.

There are many brands, and there are special refill colors consisting of four basic colors, available at maintenance shops or printer shops.

Hello, your printer type does not need to be refilled in this way because the printer (Cannon G1010) contains ink tanks that can be filled when they run out, but in the event of not printing due to leaving the printer for a long time without use, you can separate the cartridges and soak them in water from the bottom only and at a height of half a centimeter, and you must be careful and avoid getting water on the contact points on the cartridge.

There are special refill colors consisting of four basic colors.

افضل عدم اغلاقها , للتعبة القادمة وفي حال الرغبة في اغلاقها يمكنك اغلاقها باي شريط لاصق مؤقتاً .

Pen ink cannot be used but there are special colours for refilling.

هناك ألوان إعادة تعبئة خاصة تتكون من أربعة ألوان أساسية , ومتوفرة في محلات الصيانة او بيع الطابعات

هل هو كويس نوع can?​@@greattechnical_AH

حاول اتباع الطريقة الموضحة في الفديو .

If the printer still does not print after cleaning the cartridge nozzles, try the following steps: 1. Clean the cartridge nozzles several times and leave the cartridge for a while after filling it until it is soaked with ink. 2. If it does not print, try following the method shown in the video.

@@greattechnical_AH every thing printing but the black ink low indicator light is blinking what to do please tell

The indicator light cannot be turned off due to the ink cartridge being filled and the light cannot be turned off unless the cartridge is replaced with a new one. I advise you not to pay attention to the indicator light.

@@greattechnical_AH okay 👍👍👍 Please do only one help how to find when to refill ink next 🤔

@@greattechnical_AH my doubt is how to analyse weather the ink is going to complete and I have to refill

You are welcome , you do not need to soak because the cartridges are still clean and in good condition, it only needs to be cleaned after refilling the ink.

Thanks.I ended up buying buying a new black catridge. It's skipping lines.The color one is empty. I wanted to use the black catridge ink, but it's skipping line.I did print alignment, nozzle cleaning, and deep cleaning, but still no results. I'm defeated.Is there a solution for skipping lines and strikes?Please, and thank you again 🙏

Welcome back, it is possible that you left the printer for a period of time without printing, which led to the blockage of the print holes (nozzles). Try placing the cartridge up to 1 cm in water from the bottom, from the side of the nozzles, for a period of time, then clean the cartridge and try printing.

You can mention any question here so that everyone can benefit and help.

You can use the same method shown in the video for the TS3440 printer.

وعليكم السلام بامكانك استخدام اي نوع حبر مخصص لاعادة التعبئة .

The cartridge can be easily closed using a suitable adhesive, but for me I left it open because I use the printer a lot, and I tried to convey the information about cleaning the cartridge that was left for a while.

@@greattechnical_AH I have one doubt regarding canon printer I have please I am new to printer field please without two cartridge PG 47 and CL 57 with anyone colour Cartridge we can use or if both cartridge are there only it will work please tell only black cartridge is inserted and colour Cartridge is not fitted (not having) weather the printer will work or not please explain please

Both the color and black cartridges must be inserted into the printer together or it will not work. If you insert the cartridge and it does not work, it is likely that you did not install the cartridge correctly or that the contact points are damaged or not connected well (try to clean them carefully) and reinstall the cartridge and make sure of the sound of installing the cartridge in its place (click).

@@greattechnical_AH okay thanks so much

Thanks a lot

You are welcome

اهلا وسهلا اخي العزيز، نقاط التماس هذة هي فقط نقاط توصيل لاتوجد تحتها قطع الكترونية وتعمل على توصيل الخرطوشة بالطابعة ولكن يجب الحذر عند التعامل معها او مع راس الخرطوشة وتجنب وصول الماء الى نقاط التماس هذة ، علماً ان نوع الطابعة التي تسال عنها تحتوي خزان حبر ملون واسود ، فخرطوش الحبر لا يحتاج الى اعادة ملىء فقط تنظيف . Hello, my dear brother, these contact points are just connection points, there are no electronic parts underneath them and they work to connect the cartridge to the printer, but you must be careful when dealing with them or with the cartridge head and avoid water reaching these contact points, noting that the type of printer you are asking about contains a colored and black ink tank, so the ink cartridge does not need to be refilled, only cleaned.

@@greattechnical_AH شكرا على الرد صديقي العزيز ساقوم بتنظيفها.. وربي يحفظك ويسعدك ان شاء الله thank you so much

اخي العزيز قمت بتنظيف الخراطيش وبعدها ظهرت مشكلة انه الضوء البرتقالي يشتغل 15 مرة بالتناوب والطابعة لا تستجيب لامر الطباعة هل لديك حل من فظلك

احتمال تحتاج الى اعادة ضبط الطابعة ويكنك اتباع الخطوات التالية : اضغط مع الاستمرار على زر الإيقاف الذي يحتوي على أيقونة المثلث عن طريق الضغط باستمرار على زر الإيقاف واضغط مع الاستمرار على زر النشغيل ايضا، ثم بعد الضغط على زر التشغيل حرر زر الإيقاف (استمر في الضغط على زر التشغيل وحرر زر الإيقاف)، أثناء الضغط مع الاستمرار على زر التشغيل ،بعد ذلك اضغط على زر الإيقاف لمدة 5 مرات، ثم حرر زرالتشغيل ، انتظر حتى يصبح الضوء الأخضر مستقرًا أو ثابتًا، بعد أن يصبح الضوء الأخضر مستقرًا تكون الطابعة الآن في وضع العمل ، اضغط فقط على زر الإيقاف لمدة خمس مرات لإعادة تعيين عداد حبر الطابعة المستهلك ثم اضغط على زر التشغيل مرة واحدة ، بعد ذلك تتم إعادة تعيين الطابعة. You may need to reset the printer and you can follow these steps: press and hold the stop button the one with triangle icon by holding down the stop button press and hold the power button,then after holding the power bottom release the stop button ( Keep holding the power button and release the stop button ), while holding down the power button press the stop button for 5 times , and then release the power button , wait until the green light becomes stable or steady , after the green light becomes stable the printer is now in service mode , press only the stop button for five times to reset the printer waste ink Counter and then press the power button once , after that the printer is resetting , there you go you have manually reset your Canon printer .

@@greattechnical_AH نعم قمت بهذه الخطوات لكن يبقى ضوء المثلث يومض 15 مرة والطابعة لا تستجيب وعند تشغيلها من جديد يرجع المشكل الاول من جديد

Hello, I have put the link in it but I have scanned it with a paper but the rest are coming, I am not able to scan it according to you, so please help me.

Hi, I didn't understand what the problem is. Please clarify.

@@greattechnical_AH thanks replying me. I solve the problem

Thank you for this helpful video, I have a question about my current printer, Canon MP250, it uses black 510 and color 511 cartridges, can I use any ink bottle brand? Will it be compatible with MP250? if possible, share a link of the same ink bottle you use. thanks alot

You are welcome, any refillable inks for Canon printers can be used, and the print quality depends on the quality and price of the ink.

The average number of pages that an ink cartridge can print varies falling within the range of 100 to 500 pages , according to the settings .

You do not need to reset the chip. Just restart the printer and ignore the lights, depending on the type of printer.

Depending on the usage and the period of time the printer was left out of operation.

Acqua, alcol isopropilico o liquido per la pulizia delle testine?

You're welcome

Thank you very much

Sure, thank you.

First, you benefited from my video or others' videos as a method of operation. Second, I used an old and dry ink cartridge for a long time. I challenge you to refill a cartridge in mins without having to soak the cartridges when using an old or dry ink cartridge and it works properly.

بالتاكيد تنجح واحتمال تحتاج الى تنظيف فقط وحسب خرطوشة الحبر المستعملة . It will definitely work, and it may only need cleaning, depending on the ink cartridge used.

هل نجحت معك الطريقة؟؟

يمكن تكرار التعبئة لاكثر من مره وحسب خرطوشة الحبر المستعملة واحيانا تتضرر نوزلات خرطوشة الحبر ، وعند ذلك يجب استبدالها بخرطوشة حبر اخرى . Filling can be repeated more than once, depending on the ink cartridge used. Sometimes the nozzles of the ink cartridge are damaged, and in that case it must be replaced with another ink cartridge.

Hello, thanks for the comment

I used external headphones