RADIO STATION AD0IM
RADIO STATION AD0IM
  • 28
  • 60 721
POTA with GI Joe
I don't normally make videos while activating, but I thought this one might be fun. Let me know if you want to see more.
I made 33 contacts during this activation, not all of which are shown.
The following HAMs are heard in this video:
K1LB
KN4GB
K8HU
N9FGC
NA9J
K3KML
N4SD
W8ZLW
K3UWY
KE8PX
KB4QQJ
KT1K
N2OIG
KC3VYK
NU8Z
Переглядів: 37

Відео

POTA with Visitors
Переглядів 35Місяць тому
Enjoy the Zen. I did copy the correct call sign into my log, just left off a dot when returning his call.
BIRD 43 Thruline Watt meter
Переглядів 1,3 тис.11 місяців тому
Bill (WA0CBW) and I look at the Bird 43 watt meter.
Antenna SWR vs Rig SWR
Переглядів 18011 місяців тому
Watch as Bill and I prove that an antenna tuner does not change what the SWR is on your antenna. Here's a link to the video showing how we built the antenna used in this video: ua-cam.com/video/KUTnAgbDdzs/v-deo.html
NanoVNA for Beginners
Переглядів 7 тис.Рік тому
I share a little info about the NANO VNA and how to set it up and use it to measure SWR
QRP LABS 50W Amp Test
Переглядів 510Рік тому
Let's see how much power the QCX and the QRP Labs 50W amp put out on 20M.
The Big Field Day Mast
Переглядів 376Рік тому
Watch as our stalwart club members raise a 50ft Military grade communications mast for Field Day 2023.
Installing Soldered PL-259's
Переглядів 2,6 тис.Рік тому
Bill (WA0CBW) teaches me how to install a soldered PL-259 onto a length of RG8X coaxial cable. This was my second attempt. On the first attempt, I got some solder in the threads of the adapter and we could not clean it out. The vise in the video is made by Panavise. Check out there Amazon store: www.amazon.com/stores/PanaVise/page/F549BA90-4234-4367-AD74-C921B8693F16?ref_=ast_bln
Ensor Park and Museum
Переглядів 273Рік тому
This video was shot at the 2023 Shriners HAM Bash in Kansas City, MO. Our featured guest is Howard (N0AZ) and he describes some of the pieces the Santa Fe Trail Amateur Radio Club brought from the Ensor Park and Museum. If you wish to learn more about Ensor, follow this link: www.ensorparkandmuseum.org/
QCX+ Main Board Build
Переглядів 166Рік тому
In this video, I share some photos showing the build progression of the main board for this kit. In all, I spend about thirteen hours on this part of the project, and then another session assembling and attaching the display board.
Build a DIY Dipole Antenna
Переглядів 21 тис.Рік тому
Bill (WA0CBW) and I build a 10m dipole without a balun or commercial center insulator. This video was meant for our club membership, but I decided to post it here as well. LInk to the wire clamps: www.amazon.com/gp/product/B099RWNW5L/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 Link to the butt connectors: www.amazon.com/dp/B07L21PL37?psc=1&ref=ppx_yo2ov_dt_b_product_details
Bench-Testing the QCX + QRP Rig
Переглядів 376Рік тому
Bench-Testing the QCX QRP Rig
QCX + Assembly Part 1 of Several
Переглядів 208Рік тому
QCX Assembly Part 1 of Several
MFJ-260C Dummy Load
Переглядів 1,5 тис.Рік тому
MFJ-260C Dummy Load
My Antenna Test Access Port
Переглядів 1782 роки тому
My Antenna Test Access Port
W0ERH Field Day 2022
Переглядів 1,8 тис.2 роки тому
W0ERH Field Day 2022
POTA K-3377 - Schilling Wildlife Management Area, Nebraska
Переглядів 1552 роки тому
POTA K-3377 - Schilling Wildlife Management Area, Nebraska
My Homebrew Wire Vertical
Переглядів 1,1 тис.2 роки тому
My Homebrew Wire Vertical
Painters Pole Dipole
Переглядів 10 тис.2 роки тому
Painters Pole Dipole
Powerwerx Inline Watt Meter
Переглядів 8 тис.2 роки тому
Powerwerx Inline Watt Meter
REVISED!! HAM Shack Tour - Radio Station AD0IM
Переглядів 2,2 тис.2 роки тому
REVISED!! HAM Shack Tour - Radio Station AD0IM
AD0IM - POTA Activation K-7392
Переглядів 1032 роки тому
AD0IM - POTA Activation K-7392
SKCC Using a Vibroplex BUG
Переглядів 4722 роки тому
SKCC Using a Vibroplex BUG
A-10 Fly Over
Переглядів 722 роки тому
A-10 Fly Over

КОМЕНТАРІ

  • @jcritch42
    @jcritch42 2 дні тому

    Wow, navy themed music, Army doll, from an Air Force guy. You just need to find a way to work in the Marines and Coast Guard!

  • @KS0JD
    @KS0JD 8 днів тому

    Go Joe!! Watch out for COBRA! Love it Kevin

  • @elmoreglidingclub3030
    @elmoreglidingclub3030 Місяць тому

    Excellent video. Thanks, guys. I’m interested in buying a Bird so this overview is very helpful.

    • @radiostationad0im307
      @radiostationad0im307 Місяць тому

      The Bird is awesome, but I wouldn’t have one if the meter itself wasn’t gifted to me. With slugs costing $200 each, the cost of ownership goes up pretty fast. I would probably settle for a nice Daiwa if I were starting out today.

  • @kendebusk2540
    @kendebusk2540 Місяць тому

    I hesitate to believe geese know anything about the equations dealing with RF exposure ;)

  • @craxd1
    @craxd1 Місяць тому

    That's a Carborundum brand, non-inductive, tubular resistor, although a few companies make one similar.

  • @ke4cci
    @ke4cci 2 місяці тому

    Loved the video. Would you post a close up of the top of the pole with dipole center.

  • @karlmadsen3179
    @karlmadsen3179 2 місяці тому

    I am good at so many things in life. I can't even begin to tell you, but God keeps me humble by keeping me pretty bad at soldering. But each of my connectors seems to be getting better and better. I might be getting the hang of this, albeit slowly.

  • @TonTonTon140
    @TonTonTon140 2 місяці тому

    Thank you for this video. I've seen so many over complicated videos on UA-cam about dipoles, but yours was simple, straight to the point and very easy to follow. Thank you.

  • @MrTommy001
    @MrTommy001 2 місяці тому

    Watching your video has convinced me NOT to buy this meter. The inability to set it at a reading and have it stay there is the killer. Thank you.

    • @radiostationad0im307
      @radiostationad0im307 2 місяці тому

      I neither recommend it nor discourage people from buying them.

  • @thomaskallmyr
    @thomaskallmyr 3 місяці тому

    När man beskriver fotosyntesen brukar man skriva 6 H2O (vatten) + 6 CO2 (koldioxid) + ljusenergi → C6H12O6 (druvsocker) + 6 O2 (syrgas). När man förenklar säger man ofta att koldioxid blir till syrgas, detta är faktiskt fel. Om man kunde spåra O2 molekylen bakåt så kommer man se att syret kommer ifrån en vattenmolekyl som spjälkats sönder, inte i från en koldioxidmolekyl. VAD SAKEN GÄLLER= FELBEHANDLING AV MIN PERSON SEDAN 1976.... 1976 VART JAG PÅ UDDEVALLA SJUKHUS FÖR BLINDTARMSINFLAMMATION. JAG OCH JAN THORSTRÖM BLEV DÄR PÅ UDDEVALLA LASARETT,VITTNE PÅ DANMARKS NATIONALDAG,TILL ETT MORD PÅ EN LITEN 12-ÅRIG FLICKA,VARS PAPPA HETER INGEMAR. EFTER ATT JAG I MILITÄRTJÄNSTEN,FYRA MÅNADER,NÄMNT FÖR REGEMENTS- -LÄKAREN PÅ ARTILLERIREGEMENTE NUMMER 9,FEMTE KOMPANIET-SÅ KOLLADE LÄKAREN UPP MIN UTSAGA,MEN LÄKARNA PÅ UDDEVALLA LASARETT HADE "MÖRKAT" BORT VÅRA VITTNESMÅL,MITT OCH JAN THORSTRÖMS,VI BLEV VITTNE TILL FLICKANS SISTA 20 SEKUNDER I LIVET-LÄKARNA SKREV ENLIGT FADERN,"DÖD GENOM PLÖTSLIG OLYCKSHÄNDELSE"-OCH INGENTING VART NÄMNT OM VAD SOM EGENTLIGEN HÄNDE. SÅ 4 MÅNADER MILITÄRTJÄNST,OCH SÅ SKICKADE MILITÄRLÄKAREN MIG TILL MARIESTADS PSYKIATRISKA KLINIK-FÖR BEDÖMNING OM JAG SKULLE HA FÄNGELSE ELLER FRISEDEL-DÅ SKYLLDE MAN PÅ ATT JAG BEGÅTT ORDERVÄGRAN. DETTA GJORDE MIG GRÅTANDE,INTE HADE JAG BEGÅTT ORDERVÄGRAN INTE. FRISEDELN VART DÅ ETT FAKTUM-DÅ JAG LÄMNADE ÖVER DET BRUNA KUVERTET TILL KOMPANICHEFEN PÅ 5 E KOMPANIET,SOM JAG BEORDRATS AV DOKTOR KATZ-PÅ MARIEBERGS PSYKIATRISKA KLINIK,BLEV K-G,KOMPANICHEFEN OERHÖRT UPPRÖRD, "VI HAR INTE NÅGRA KLAGOMÅL PÅ DIG KALLMYR,DU HAR SKÖTT DIG PERFEKT,BÄDDAR SÄNGEN,SKÖDER DINA TIDER OCH PERSEDLAR OCH VAPENVÅRD-DU KOMMER SNABBT ATT STIGA I GRADERNA-DET FINNS INGEN ANLEDNING TILL ATT KALLMYR SKA HA FRISEDEL...." EFTER ETT TAG FICK JAG TÅGBILJETTEN,OCH LÄMNA IN MINA PERSEDLAR OCH KSP M/60-MED HJÄLM OCH ALLT. JAG TOG MIG NÄR DE ANDRA SKULLE PÅ EN FLYGÖVNING,OCH HADE GÅTT TOG SIG ETT BEFÄL TIDEN ATT HJÄLPA MIG ATT LÄMNA IN OCH STRYKA,EFTERSOM JAG LÄMNAT IN ALLT MATERIAL. JAG TOG MIG TILL TÅGCENTRALEN I KRISTINEHAMN,DEN STAD JAG VART KRIGSPLACERAD I,OCH STEG PÅ TÅGET....I MIN KUPÉ SATT EN KORPULENT ILSKEN ÄLDRE MAN OCH ORERADE ÖVER ATT JAG FÅTT FRISEDEL-HADE DET VARIT I KRIGSTID HADE JAG FÅTT KRIGSRÄTT OCH ARKEBUSERING-M.M. EFTER ETT TAG KOM TÅGKONDUKTÖREN OCH FRÅGADE EFTER MIN BILJETT-OCH SADE TILL MIG-FAST NAMNET INTE STOD PÅ BILJETTEN-"THOMAS,FÖLJ MED MIG SÅ SKA DU FÅ EN EGEN KUPÉ,OCH HOPPAS ATT RESTEN AV RESAN BLIR MER ANGENÄM". NÄR JAG PRATAT MED GENERALEN PÅ A9-INNAN HEMRESAN-SA HAN,GENERALEN-"NÄR DU TRÖTTNAT PÅ GROVARBETE,KAN DU ÅTER SÖKA TILL A9-MEN DÅ FULLGÖRA DIN VÄRNPLIKT MEN DÅ SOM MALAJ..."-JAG SVARADE GENERALEN,EFTERSOM JAG TIDIGARE VARIT UTTAGEN TILL STABSTROPPS OFFICER,DVS UNDERRÄTTELSEOFFICER,ALLTSÅ KAPTENSGRAD. JAG HAR INGA PSYKISKA PROBLEM-DÄREMOT EN GENOMFALSK DIAGNOS-"PARANOID PSYCHOS"-SOM GRUNDAR SIG PÅ MITT UTTALANDE OM FLICKANS ÖDE. DEN PERSON SOM MÖRDADE FLICKAN VART VÄLKÄND AV MIG. POLISCHEF WALTHER EVERT KARLSSON,NUMERA KEGÖ. HAN STOD BAKOM FLICKAN OCH KVÄVDE HENNE MED ENA HANDEN ÖVER MUNNEN OCH HÖLL HENNES NÄSA MELLAN TUMMEN OCH PEKFINGRET....ÖGONEN HIMLADE PÅ HENNE....OCH INFÖR VÅRA ÖGON FÖLL HON IHOP FRAMÅT...BLEV LIGGANDE MED HUVUDET MOT OSS I DÖRRÖPPNINGEN TILL RUMMET...WALTHER KEGÖ GICK EMOT OSS SOM STOD I DÖRRÖPPNINGEN,OCH VÄSTE " FLYTTA PÅ ER,DJÄWLA INVALIDER". EFTER JAG KOMMIT TILLBAKA TILL UDDEVALLA FRÅN KRISTINEHAMN,SÖKTE JAG ARBETE PÅ ETT TILLFÄLLIGT KONTOR SOM UPPRÄTTATS PÅ STORA HELLEVIGSGATAN I UDDEVALLA,"FARTYGSISOLERING"-DÄR NU SEDAN MÅNGA ÅR SJÖMANSHUSMUSÉET LIGGER. JAG KOM ATT ARBETA TILLSAMMANS MED FLICKANS PAPPA,SOM SADE :"JAG TROR INTE MIN DOTTERS DÖD VART NÅGON OLYCKSHÄNDELSE,JAG TROR NÅGON GJORDE NÅGOT MOT HENNE. INGEMAR HETTE HAN."BLOMMAN" LADE SIG I SAMTALET OCH SKRATTANDE,INTE KUTYM,SA HAN "FÖR DET VET VÄL DU KALLMYR,SOM ÄR FRÅN "GÖKBOET".-VILKET FICK INGEMAR ATT BRISTA UT I GRÅT-OCH SÄGA TÅRÖGD-"DET KAN VÄL POJKEN INTE HJÄLPA VEM SOM ÄR HANS FAR !!!" JAG AVSLUTADE MIN ANSTÄLLNING PÅ "FARTYGSISOLERING" OCH FICK JOBB VIA KNUT-PÅ TVÄTTEN UDDEVALLA SJUKHUS-JAG VART ALDRIG SJUKSKRIVEN FÖR "PARANOID PSYKOS"-DEN DIAGNOSEN FICK JAG DÄREMOT 1992,FÖRTIDSPENSION PÅ EFTER ATT TOMMY GUNNARSSON,KASTAT EN JÄRNVÄGSBJÄLKE,SÅ DEN KNÄCKTE MIN BRÖSTRYGG UPPE PÅ FRIDHEMSTIPPEN-DOKTOR SYLVIA VIDE-SA DET VART SVÅRT ATT FÅ FÖRTIDSPENSION ENBART PÅ RYGGSKADOR/FÖRSLITNINGSSKADA I BRÖSTRYGGEN. EFTER ARBETE PÅ TVÄTTEN UDDEVALLA SJUKHUS BÖRJADE JAG OCH LARS-OLOF GRUNDBERG PÅ SVETS/PLÅTSLAGARKURSEN NERE I HAMNEN-VI SKULLE VARA GARANTERADE ARBETE OM VI KLARADE KURSEN.SÅ 4 OKTOBER 1976 ARBETADE JAG PÅ UDDEVALLAVARVET AB-SOM PLÅTSLAGARE VID VÄSTRA FLAKET-KÄRRAVERKEN. 1978 I DECEMBER VART JAG SVÅRT LUNGSKADAD AV RÖKEN FRÅN ASFALTEN OCH CEMENTEN-OCH FICK OMSKOLAS TILL MASKININGENJÖR 6 JUNI 1980-TOG JAG EXAMEN VID NILS ERICSONGYMNASIET.TILLSAMMAN MED VITTNET JAN THORSTRÖM SÅG VI FLICKANS MÖRDARE SOM VART DÄR PÅ SKOLAVSLUTNINGEN. JAN THORSTRÖM GJORDE MIG UPPMÄRKSAM PÅ HANS NÄRVARO GENOM ORDEN: "KOMMER DU IHÅG MANNEN MED DEN LUSTIGA NÄSAN?"-SÄGER PLÖTSLIGT JAN THORSTRÖM. "VART STÅR HAN?" FRÅGADE JAG,JAN THORSTRÖM PEKAR LIKA HÖGLJUTT,OCH JAG SER WALTHER KEGÖ,20 METER FRAMFÖR OSS,HAN HÖRDE THORSTRÖMS ORD-OCH KOM IKLÄDD MELLANGRÅ BYXOR OCH MÖRKBRUN KAVAJ-SLIPS-MOT OSS OCH JAG VÄNDE RYGGEN TILL I REN REFLEX-HAN NÅDDE MIG OCH GAV MIG EN KNUFF I RYGGEN-LIKSOM FÖR ATT SÄGA"HÅLL KÄFTEN-OM LIFVET ÄR DIG KÄRT" JAG TOG EXAMEN DEN DAGEN MED HJÄRTAT I HALSGROPEN. JAG SLUTADE EFTER OMPLACERING PÅ UDDEVALLAVARVET AB-PÅ GAMLA FÖRRÅDET-CENTRALFÖRRÅDET PÅ UDDEVALLAVARVET,DEN 25 NOVEMBER 1983. DÅ HADE JAG REDAN INLETT ETT FÖRHÅLLANDE MED SRIYANIE JAYAMANNE FÖDD 1959-10-17.DET VART PERSONALCHEFEN SOM UPPMANADE MIG ATT FRIVILLIGT SÄGA UPP MIG,EFTERSOM JAG GICK OCH TOG LEDIGT FÖR ATT ARBETA MED LÄRARVIKARIAT-ANNARS SKULLE JAG RISKERA SPARKEN-VILKET SKULLE SE ILLA UT I MITT C.V. 1985 I FEBRUARI-ORDNADE DOKTOR GÖRAN PALMERS ATT JAG VIA EN PRYO ANSTÄLLNING HOS SVEN BYLANDER I TROLLHÄTTAN-ATT JAG NEDDROGAD BLEV UTSATT FÖR ECT-BEHANDLING UTAN LÄKARES UNDERSKRIFT-SKÖTERSKAN AVBRÖT BEHANDLINGEN NÄR DOKTOR GÖRAN PALMERS SKREK " ÖKA" SPÄNNINGEN-HON TILLKALLADE ÖVERLÄKARE,OCH DÅ FRAMKOM ATT DE GJORT KARDINALFEL MOT MIG. JAG VART INNE PÅ AVDELNING 24 I EN VECKA UNDER TUNG MEDICINERING PÅ GRUND AV FLERA SÄPO MÄN SOM HÄRJADE MED MIG PÅ AVDELNINGEN-DE VILLE JAG SKULLE SKRIVA ATT WALTHER KEGÖ-INTE MÖRDAT FLICKAN-SAMT ATT HAN INTE HÖLL PÅ MED NÅGON KONSPIRATION MOT OLOF PALME...BETÄNK ATT DETTA VART EXAKT ETT ÅR INNAN PALME-MORDET. LÄKAREN&PSYKIATRIKERN HÅKAN JOHANSSON SADE TILL MIG ENSKILT ATT = "JAG ÄR PERSONLIGEN EMOT ATT MAN ANVÄNDER SJUKVÅRDENS RESURSER TILL POLISIÄRA INSATSER"-OCH SÅ SKREV HAN ETT SJUKINTYG "TRE MÅNADER SJUKSKRIVNING PÅ GRUND AV ASTHMA"-VÄNDE PAPPERET MOT MIG OCH SADE DET VART SVÅRT ATT FÅ SKADESTÅND FÖR POLISÖVERGREPPET PÅ AVDELNING 24-OCH HAN SADE " BLIR DET BRA SÅ HÄR".? ETT GULT PAPPER MED GRÖNA LINJER-SOM JAG ALDRIG LÄMNADE IN PÅ FÖRSÄKRINGSKASSAN,UTAN PLACERADE BAKOM ETT FOTOGRAFI I HEMMET. JAG OCH FAMILJEN SRIYANIE OCH RICHARD CHAMINDE GUSTAFSSON-FLYTTADE MED EN TRE MÅNADER GAMMAL GEMENSAM DOTTER TILL MALMÖ-FÖRST SKRIVNA PÅ KAPRIFOLIEVÄGEN 14,POSTBOX NÖBBELÖV 1040. SEDAN RAMELSVÄGEN 123 FJÄRDE VÅNINGEN ROSENGÅRD,MALMÖ. NOTERA ATT JAG INTE VART SJUKSKRIVEN FÖR PSYKISK OHÄLSA-UTAN SÖKT ARBETE OCH ARBETAT HELA TIDEN DE TRE ÅR JAG BODDE I MALMÖ. FÖRST NÄR DEN JÄVIGE DOMAREN,SOM HAR ONATURLIGT MÅNGA FÄLLANDE DOMAR BAKOM SIG,YTTRAT SIG PÅ LAGENS STRÄNGASTE STRAFF 2 ÅR-SEDAN KOM JAG 2010 EFTER DEN 25 AUGUSTI ATT HAMNA PÅ KUNGÄLVS RÄTTSPSYKIATRISKA OCH BLI BEDÖMD ATT HAMNA PÅ RESTAD GÅRD OCH SENARE DET FÄRDIGSTÄLLDA BRINKÅSEN DÄR MATS BLOM ARBETADE SOM ANLÄGGNINGSARBETARE. FÖRE UTSLÄPP FRÅN BRINKÅSEN 2012,GAV DOKTOR ÖVERLÄKARE REINER OLLWEIN MIG ORDINATION GULA PILLER 25 MG SERDOLECT,SAMT PARGITAN ( KEMISK) "KASTRERING" OCH PÅSTOD DEN MEDICINERINGEN VART BRA FÖR MIG-ABSOLUT PERSONLIGHETSFÖRÄNDRANDE MED SVÅRA BIVERKNINGAR VART DEN.... PÅ HEDER OCH SAMVETE,ANMÄLER JAG REINER OLLWEIN OCH BOZENA ARENDARSKA-FÖR FELAKTIG DIAGNOSER SCHIZOFRENI OCH PARANOID PSYCHOS. SAMT FELAKTIG MEDICINERING SOM FÅTT BESTÅENDE MEN. SERDOLECT ÄR FÖRBJUDEN I AUSTRALIEN OCH USA. TILLVERKAS AV LUNDBECK I KÖPENHAMN,DANMARK. Visa citerad text 😢😮😮😮😮😮😮😮😮😮

  • @davecolver7769
    @davecolver7769 5 місяців тому

    300W

  • @tpobrienjr
    @tpobrienjr 5 місяців тому

    Good job! I was licensed in 1958 :-)

  • @thedaddyshow01
    @thedaddyshow01 5 місяців тому

    Excellent video! Concise, informative, and great for a Newbie! Thank you for making this!

  • @pcmultimedia1
    @pcmultimedia1 6 місяців тому

    I have one to build ready , after the QcX+ build .

  • @pcmultimedia1
    @pcmultimedia1 6 місяців тому

    My first build was a 40meter version of the QCX- mini

    • @radiostationad0im307
      @radiostationad0im307 6 місяців тому

      I’ve built four of their kits now. Two QCX plus, one mini, and the amp. I’m fairly addicted to them. Building these has definitely improved my soldering skills.

  • @pcmultimedia1
    @pcmultimedia1 6 місяців тому

    I found the build quite easy, the T1 was pretty easy , I e build stuff for over 40 years so for me it was fun.

  • @pcmultimedia1
    @pcmultimedia1 6 місяців тому

    Hi there, just building one of these, I found with T1 was to wind it , take a photo with my iPad , and then zoom up the image to check the windings, easy to count the turns this way and adjust.

  • @vnonkwinn6233
    @vnonkwinn6233 7 місяців тому

    He's talking in respect to ham operation, My interest is 'AM 11 METERS.

  • @Pyro1776
    @Pyro1776 9 місяців тому

    This video could have been 5 minutes long… so much pointless rambling and not enough antenna theory.

  • @mecatx
    @mecatx 9 місяців тому

    Great video. We need some of these for teaching students. i like that case for storage. What model is this and where did you purchase it. thank you

    • @radiostationad0im307
      @radiostationad0im307 9 місяців тому

      I probably should have posted that earlier. Thanks. deepelec.com/nanovna-f/

    • @mecatx
      @mecatx 9 місяців тому

      thank you for the quick reply@@radiostationad0im307

  • @claytonmoore9530
    @claytonmoore9530 9 місяців тому

    I’ve been looking for a better radial connector. Didn’t even think of metal toilet flange 🤦‍♂️ I’d just need to drill and tap some connectors In it. Thanks for the video.

    • @radiostationad0im307
      @radiostationad0im307 9 місяців тому

      I ended up not using that antenna but the using that flange for the radials does work very well for the cost.

  • @chuckmartin6049
    @chuckmartin6049 10 місяців тому

    I guess to tune it you just keep cut the wires shorter or can you just loosen the wire clips and pull the wires closer together?

    • @radiostationad0im307
      @radiostationad0im307 9 місяців тому

      Yeah, We didn't go into the tuning portion as time was running short for us.

  • @MaritimeHomesteader
    @MaritimeHomesteader 11 місяців тому

    Good video guys. One question where do you take the measurements from for the wire length. Once you know you need say 34ft each wire in the dipole for a 40m 1/2 wave, where do you measure from to set the length correctly. You had said in the video the wire that came through the centre insulator is counted as part of the wire length then you edited that with text I noticed. Thanks guys

    • @radiostationad0im307
      @radiostationad0im307 9 місяців тому

      Good question! As I understand it, the radiating length of a Dipole is comprised of the horizontal lengths of wire. Those lengths from the feed point to the clamps do not count.

  • @ryanc5517
    @ryanc5517 11 місяців тому

    He needs one oscilloscope for every day of the week. 😂

  • @2e0fjjvlogs32
    @2e0fjjvlogs32 11 місяців тому

    We should of seen you use the antenna. SEE IT WORKING and make a contact.

    • @radiostationad0im307
      @radiostationad0im307 11 місяців тому

      This was built as a prototype for a class. Leaving it untuned has come in handy for other programs at our club.

  • @richardcallihan9746
    @richardcallihan9746 11 місяців тому

    Coax, once stripped. Push the braid towards the jacket, this will loosen and shorten it, like a Chinese finger puzzle. Then make a hole in between the braid picks next to the jacket. Slightly bend the dielectric and pull it through the hole Using a shepherd hook. The braid stays intact, pull on the braid to elongate it again, and twist it as necessary.

    • @radiostationad0im307
      @radiostationad0im307 9 місяців тому

      As with anything in HAM radio, there are many ways to get the job done.

  • @richardcallihan9746
    @richardcallihan9746 11 місяців тому

    Why did you break the insulation at the end? Looks like that is where you would end the wire, instead. Pull while you twist, and don't twist too much. You are twisting too much. 73

  • @KS0JD
    @KS0JD 11 місяців тому

    Great video Bill and Kevin! 73

  • @dandypoint
    @dandypoint 11 місяців тому

    Good explanation and demonstration. A couple comments that may help. I usually just tie a knot in the antenna wire at the center insulator. Depending on type of wire. With stranded a knot works but I have used almost exclusively solid copper wire for 60 years. Used stranded once because my boss purchased stranded wire! If number 14 or 12 solid wire I just pass the wire through the insulator and wrap a couple turns around the main wire and then down to the coax connection point. Very few of my wire antennas have broken unless a tree or large branch falls on it! Most were up 10 years before I either changed them or changed locations. I also always use the same electrical tape method. Since 1961. It always works for me. For portable / temporary antennas I have used standard electrical wire nuts, stainless screws and nuts, and of course solder. For an expected long term antenna I solder. Typically I use a coax pigtail long enough to reach the ground and put a PL-259 there where I can connect additional coax without putting a strain on the connector. Sometimes I just use a long enough cable from the antenna to reach my remote coax switch. Otherwise I use a barrel connector at the ground. For waterproofing there I use a self fusing or self vulcanizing tape. I use Rescue Tape which is sold by Ace Hardware. It comes off easy with no sticky mess like regular electrical tape. 3M has a similar product. Also for portable antennas I frequently do not use insulators at the ends of the antenna only in the middle. I make a loop at the end and any non conducting rope works. Saves weight and money. Under 100 watts only. For high power I do use insulators as the voltage at the end of a wire can be high. There are some new “wire nuts” called Wago lever wire connectors that I plan to try. Like the Crimper! For crimping the right tool is absolutely mandatory. If done right a crimp is great! 73, DE N4DJ

    • @radiostationad0im307
      @radiostationad0im307 9 місяців тому

      I love your comments. When we built these at the club meeting, we stressed that this particular build was probably not going to be resilient enough for a permanent installation, but once tuned would be a good POTA or weekends only antenna. It's a terrific project to learn the art.

  • @dennistate5953
    @dennistate5953 11 місяців тому

    Thank you!

  • @si12volt1
    @si12volt1 11 місяців тому

    a bit pricy @ 50 to 80.00 depending on who you buy from and what amperage it will handle

    • @radiostationad0im307
      @radiostationad0im307 11 місяців тому

      Agreed. I’ve had it for years, but there are cheaper alternatives.

    • @si12volt1
      @si12volt1 11 місяців тому

      @@radiostationad0im307 The cheaper last about a day or so china brands

  • @anthonymarino4260
    @anthonymarino4260 Рік тому

    not a fan of HF od it right or don't do it at all. you are making them for other persons and won't use them yourself. not good

  • @apar1560
    @apar1560 Рік тому

    Interesting and informative 👍 Thanks. ...Alan in 🇨🇱

  • @radiostationad0im307
    @radiostationad0im307 Рік тому

    WA0CBW found Marker 1. It tells you in the upper left of the display; it was at 15.5 Mhz and 3.00 SWR. The marker was at the upper right corner of the screen hiding under the menu. Since the marker would be off the display (above and to the right) you would have to use the jog wheel to move the marker to the viewable portion of the screen.

  • @LarryMassey
    @LarryMassey Рік тому

    Very informative, coming from one who knows little regarding Nano VNA. Thanks

    • @radiostationad0im307
      @radiostationad0im307 Рік тому

      Thanks for the positive feedback. I’m not a know it all either, so I enjoy making videos for the non-experts among us.

    • @nats50
      @nats50 Рік тому

      I learned something here that I didn't get from others. Thanks.

    • @radiostationad0im307
      @radiostationad0im307 Рік тому

      @nats50 I’m glad!

    • @radiostationad0im307
      @radiostationad0im307 Рік тому

      @nats50 Which part if I can ask?

    • @nats50
      @nats50 Рік тому

      @@radiostationad0im307 That part where the marker is that tells you if the dip is to the left of it, your antenna is too long, and if it's to the right of it, too short? Also, up to now, I haven't really "used" my Nano yet. I've tried to get the SWR, but after seeing different videos on how to calibrate it, some using the "patch or jumper" cables that came it, some says it's not necessary, it's confusing. Most of us just wants to use it for the SWR, that's it. I don't care about the Smith chart, the "thru" and "isolation" thingy, the reactance and capacitance, etc. Just step by step, how to "properly" calibrate it and so on.

  • @KS0JD
    @KS0JD Рік тому

    Nice video Kevin! A simple way to learn the basics of the Nano VNA 73

  • @streetshooters
    @streetshooters Рік тому

    4X the 5 watts = less than 1 S unit at the receiving end which is why QRP at 5 watts works so well as it's only 2 S-units down from 100 watts.

  • @Dave-AA0IW
    @Dave-AA0IW Рік тому

    Impressive!

  • @DXJungle
    @DXJungle Рік тому

    Thanks for activating! 🤝

  • @rohnkd4hct260
    @rohnkd4hct260 Рік тому

    not a bad little quick antenna

    • @radiostationad0im307
      @radiostationad0im307 Рік тому

      It doesn’t take nearly as long to make as shown. videos add 10 minutes to everything.

  • @Gumby1978
    @Gumby1978 Рік тому

    I like it

  • @paulplack490
    @paulplack490 Рік тому

    And I thought I'd done something original! I have a similar setup, but use the 23' Mr. LongArm pole. I carved the rubber grip to expose the hole at the base, and it slips snugly over a Vestil H-frame base, used for temporary fencing. I run a 40m dipole, ends secured by 5-gallon water jugs using bungees.

  • @jonthebru
    @jonthebru Рік тому

    I am planning to build a dipole on the lighter side but able to handle 400 watts or so. This is a good plan. The span I have to cross doesn't have any center support so up to now I have been using end fed antennas. It's gonna be a lot longer than a 10 meter antenna though.

  • @DK5ONV
    @DK5ONV Рік тому

    💯👌🙋‍♂

  • @P47Harry
    @P47Harry Рік тому

    Great job! De W3DNQ

  • @brianfields4479
    @brianfields4479 Рік тому

    Does the metal pole effect the ant. I use 3 poles as a 20m vertical array.

    • @radiostationad0im307
      @radiostationad0im307 Рік тому

      No. The antenna elements are not running parallel to the mast, so little or no coupling. I have used this dozens of times with nothing but success. Like all antennas, there are a million variables that affect performance every time you use it. I need this to work well enough for a successful POTA activation. It’s never failed.

  • @nickmad887
    @nickmad887 Рік тому

    Thanks

  • @saldomino1639
    @saldomino1639 Рік тому

    Great Video and presentation! How many feet is the pvc pipe I would like to try it out come field day thanks Sal KM4PPV!

    • @radiostationad0im307
      @radiostationad0im307 Рік тому

      Glad you like it! It’s about 24” with an interior diameter of about 1.5”.

  • @davidwilliamson2115
    @davidwilliamson2115 Рік тому

    Try running the tie-down threw small orange marker cones