Відео

Thanks 😢

There are 2 switches. At trigger and left side after motorrail (the white block upside).

LOL, thanx for the video. 1:08 in and I went to confirm the drum movement. A rock fell out. problem solved...lol.

I have similar model, every time I go to press the lift bottom from my garage, it lifts barely off the ground, I press the button again to reclose it, then I have to press the button a third time to fully open it. Does this happen to anyone else? Is this a common problem?

if you are drilling or sawing into lead 2 inches from your face hole, wear a dust mask at least. This guys an idiot.

Watched your video last week and just completed my first spark plug replacement ever. 2018 Ford Expedition (same 3.5L eco engine). Had to come back and say thank you! I was extremely more confident completing this job. I do agree with you, torqued down to 240 in-lb per spec and it didn’t “feel” right lol. But that’s what the engineers wanted. Only assumption is due to the brittle ceramic.

Whew…some salty a$$ comments here. Ya, I’m going to let my 6 y/o son use my mitre saw and drill press so it can be fair 😂 Look at the cars in the derby. 90%+ of them had significant adult “assistance” just like mine did when I was a scout. Get off your high horse and teach your kid how to safely use the tools and machines so he can help his kids in the future 💯

I especially like the part where you don't show the most important step of fitting it in the tread

My garage has a major infestation this winter. Every cabinet. Every surface. Every kids toy covered in mouse SHI* Don’t mind me just a grown man crying about the hell of cleaning it all

Thanks indeed I just found your video, I shut it off to replace the expansion tank and when I came to turn it on didn’t know how to turn it on, till I saw your video the trick when you pressed the pilot button down man that was relieving

This is lame can't even see what he's doing he's holding his cell phone while he's working and all you can see is the wall

I just cleaned the little switch but it still didn't work

Nice work but, this LED headlights do fail prematurely. Simply because of the built in cooling fan. I suggest going full HID conversion. Give an update after several months to see how they are holding up?

Thnk you.. but can’t update

How to remove the old one, it want come off

The safety L bracket should go underneath!!

Thank you so much it's working nw

Simón

Thank you for this video! You helped me fix an issue I was having!

Thanks for the video. Can this fill valve replace old fill valves with the ball float?

If you tune it so it runs straight, you can pull that weight further back. Our plan was to have the center of mass at about where the front edge of the tire crosses the bottom of the car. Also, you can cut the body about a third thinner to save on weight. Every tiny bit the you remove from the block, you get to replace as weight, just in front of that rear axel. Finally, those canopy weights are cool, but if you drop the added weight down into the body, the car will be more stable at the bottom of the hill allowing it to really pull away from the lesser cars

How do you put the canopy weight on?

What if it doesn’t work.

2015 same problem

Thank you for sharing Just wondering if the water hose have to connect to hot water or cold water ? As my machine is not hot during using thanks and look forward to hearing

Does this process clear your data or just to restart the phone, cause i don't want the data to clear

or use a foamy sponge to collect the water at the bottom.of the cistern

I think its pretty much been confirmed that NGK manufactures the Motorcraft plugs. Bunch of info all over the net, plus the mechanic channels like FordTechMakuloko has confirmed this to be truth. Really no need to go NGK direct unless you just like the box and the marketing on it.

Seeing this and then thinking of my one 45 degree cut at the front of the block to try and make it look like a semi, and painting it in camo. Perhaps was not the fastest design.

Thanks bro

Super!!

Not if the pipe is connected.

Do all dryers have the same wheels ?

Great, until the garden hose explodes because it's not rated for nearly the pressure that the air compressor operates at😂😂

You changed the location of the rear axle. Illegal in most packs.

Hi! Thanks for the video. Unfortunately, the link to the bulbs dont work anymore. Do you have a new link?

thanks bro 👍👍👍

My tank stays full of water during the day as the Toliet is used often. However, every morning the tank is empty of water. I tap the gray button which can be used to lower/raise the water level and then the tank fills up. What would you suggest needs to be fixed?

So is it a race for the kids or the dads, you be the judge

I have the same coffee maker as you. My problem is it brews for a few minutes then shuts off, then brews a few more minutes and shuts off, and repeats like this. Tested continuity of both fuses, both are good. So I think it is the thermostat...the thin wire that is clipped onto the heating element with a metal clip. If you remove the metal clip and slide the metal ferrule and protective sheath away you will see the thermostat. I unplugged the connector for the thermostat at the circuit board and there is no continuity across the thermostat. So do you know if no continuity means the thermostat is bad? Thanks. *** Update -- Did more research and found out that this little device is a "thermistor", not a thermostat. It looks like an electronics resistor and its resistance varies with temperature. It operates differently than a thermostat in that it keeps the temperature constant vs a thermostat which cycles on and off. You can test it by measuring resistance at different temperatures, starting at room temperature. But you need to know the specific resistance specs in order to test it. Just google "thermistor vs thermostat" for more info. I thought I would replace mine and googled "Cuisinart coffee maker thermistor" but came up empty.

The screen went black after it updated. Now I am getting "update firmware" on the screen with a white line underneath. The sd card is in the printer at this point. Thanks for any help.

Thank you !!!!! My phone was bricked. It shut off, thank you !

What’s the point of having the ability to adjust a tour that opening is bigger?

I'm glad you blew off the directions. The added negative cable was irritating me. I'm using this in my civic just like you use it here (like I used my old one of better quality). No engine block connection.

Hope mine is just this too!!!

do starter shingles overlap?

Work it thank

It’s a 50 w/ GFCI from an old hot tub I had. Wire is thick, not sure if gauge. But it’s already wired for this type of heater. Just thought the 50 would be ok since it’s already there.

Thank you for this video!!

Same issue how do update my phone??