@@ARFacts2058 Same here bro...! I've already received it...! But the headlight is a bit long one and is unable to fit in the dome.... I'm looking for some workarounds for that...! Do let me know if your fitted properly once you receive it.... Thanks.
Y8's high beam is more focused compared to the Y6D. But my Y6D high beam is pretty focused with a bit of stray to the side because of the reflectors. Not really an issue for me cause I seldom use hi-beam and when I do.... its usually to glare other ppl anyway ( to get their attention )
@@TCsAnythingGoes The low beam is fine, just follow original position, never adjust. But when i compare high and low beam, i can see there is a gap between high and low beam, perhaps i should adjust high beam?
Interesting..... very interesting. As time goes on, more and more technological advancement. LEDs used to be 6000k and above only. Hopefully they come out with a 3000k bi-led projector so I can do another kind of project.
Hi bro, whats the different between these mini projector headlights vs those normal ones(without mini projector) like the C6 type? My car has the reflector headlights with halogen bulbs, so which one should I buy? Can the Y6 work properly?
Don't get C6, horrible light output (bright but scattered all over the place). The difference is normal ones functions like a normal bulb (with varying results) whereas those with mini projector lenses has a more focused and predictable output which would result is less glare to others.
nope, cause this is meant for reflector headlights. It comes with a projector. What you need is the type of bulb and then go get an LED that fits into the holder for your type of bulb. I recommend getting something like Novsight or branded ones. Avoid cheaper brands like C6.
@@TCsAnythingGoes 🥲i just bought C6🤣but actually the C6 led is only for the high beam, since i dont really using high beam very often, i think its okay, but sir, im soooooooooo stressed out on deciding which Led should i get
@@TCsAnythingGoes because i drive an Alza, it has a projector headlights, but what makes me furious is that, im so confused which bulb i should get, i know what the socket are,its just that im scared that its not gonna be bright or etc
@@adibafiq6945 A few things you need to check before purchasing your LEDs - is the reflectors inside the projector still in good condition or is it burned? - will the new LED fit your current headlight housing Hit me up on FB TC's Anything Goes Channel if you wanna chat more on this.
![АЛАУДИНОВ у Скабеевой: эти их ВСУ нас НЕ ДОГОНЯТ 😁 [Пародия]](http://i.ytimg.com/vi/an0anqU4WGQ/mqdefault.jpg)
![VLOG LMST : Review Y6D (H4) LED Mini Projector lens [Sub : BM/Eng/中文]](/img/n.gif)
I have ordered Y8 from Amazon and it is just awesome. Superb brightness.
today i have ordered y8 price is 2321rs inr ❤❤
@@ARFacts2058 Same here bro...! I've already received it...! But the headlight is a bit long one and is unable to fit in the dome.... I'm looking for some workarounds for that...! Do let me know if your fitted properly once you receive it.... Thanks.
can you please provide the buying link I am unable to find it on amazon
@@naman1446 guess the link is deleted by UA-cam. Search for it on Amazon. You should get it.
@@doctorpurohit made in china or usa?
How hot different between Y6 and Y8 sir.
it is mini projector or ordinary lamp?
This is mini projector.
Where did you purchased the y8 ?
y8 can use at 135lc?? H4
Its a 12v bulb and uses H4. I am not sure if you can use it on a motorbike.
Can hs1 and h4 same socket
Can this kind of led projector bulb hb4 use in inspira headlamp?
There is a glare shield inside which you will need to remove.
@@TCsAnythingGoes yes you are right
Sir, what is the colour temperatuure rating of the y6 led you use ? . 4000k or 6000k? and is the light look blueish colour or not?
Its 6000k. Perfect white.
As i know Y6D high beam not really focus and glare on side, does Y8 better?
Y8's high beam is more focused compared to the Y6D. But my Y6D high beam is pretty focused with a bit of stray to the side because of the reflectors. Not really an issue for me cause I seldom use hi-beam and when I do.... its usually to glare other ppl anyway ( to get their attention )
@@TCsAnythingGoes how come my y6d high beam not focus at all and only glare on side 😊 any idea?
@@edisonxie8206 how high did you adjust the low beam?
@@TCsAnythingGoes The low beam is fine, just follow original position, never adjust. But when i compare high and low beam, i can see there is a gap between high and low beam, perhaps i should adjust high beam?
Is the headlight projector or reflector setup?
headlights are reflector setup. But the Y6 and Y8 bulbs are bulbs with built in projector hence a clear cut-off.
kenari use Y8? i buy y6D cant insert headlamp
Y8 and Y6D same legs. Why cannot insert? Is there glare shield in the headlamp? If got then need to remove it. Now got newer Y9 already
Seem like there is 4300k for y8 led already.
Interesting..... very interesting. As time goes on, more and more technological advancement. LEDs used to be 6000k and above only. Hopefully they come out with a 3000k bi-led projector so I can do another kind of project.
Hi bro, whats the different between these mini projector headlights vs those normal ones(without mini projector) like the C6 type?
My car has the reflector headlights with halogen bulbs, so which one should I buy? Can the Y6 work properly?
Don't get C6, horrible light output (bright but scattered all over the place).
The difference is normal ones functions like a normal bulb (with varying results) whereas those with mini projector lenses has a more focused and predictable output which would result is less glare to others.
can this bulb be use in projector headlights?
nope, cause this is meant for reflector headlights. It comes with a projector. What you need is the type of bulb and then go get an LED that fits into the holder for your type of bulb. I recommend getting something like Novsight or branded ones. Avoid cheaper brands like C6.
@@TCsAnythingGoes 🥲i just bought C6🤣but actually the C6 led is only for the high beam, since i dont really using high beam very often, i think its okay, but sir, im soooooooooo stressed out on deciding which Led should i get
@@TCsAnythingGoes because i drive an Alza, it has a projector headlights, but what makes me furious is that, im so confused which bulb i should get, i know what the socket are,its just that im scared that its not gonna be bright or etc
@@adibafiq6945 A few things you need to check before purchasing your LEDs
- is the reflectors inside the projector still in good condition or is it burned?
- will the new LED fit your current headlight housing
Hit me up on FB TC's Anything Goes Channel if you wanna chat more on this.