dying problem watched your video was the pos cable loose was getting ready to start on sensors you sure saved me some aggravation god bless guys like you that post this stuff on here
" If I sound miserable, it's because I am." That is funny... ☝😉 ... halfway through the video I am thinking that this guy sounds really annoyed. Nice bracket though.
In my case With my very rough idle it was the maps sensor's vacuum elbow it felt really good no cracks but it looked like it was stretched out and losing vacuum on the throttle body side so I put a zip tie on the throttle side and the map sensor side and it fixed my problem by more than 50% but I'm still going to build that computer bracket too. Also make sure my o2s and catalytic converter are good.
So my 98 stalls and only stays on while holding the gas in the beginning and it'll stay on over all after idling it will shut off randomly what should I do?
If I had only seen this video before I purchased a recorded computer aftermarket. I was ahaving the same problem with the three main plug terminals. Eh...... you live .you learn.... hopefully.....
This is exactly what was wrong with mine found out when I pushed on the wires and had somebody started it would stay running for hours he's been is I would drive and hit a bump or something it would shut off found out it was just these plugs loose
Interesting fact, my 2000 Durango has both 1999 and 2000 model parts. Really frustrating to order a part for the 2000 model year and its actually a 1999 model part.
Have a 2000 dodge durango and have few videos of my own if you guys ever want to check out I solved a pcm problem where the durango would shut off randomly here and there on long or short drives rain or shine cold or hot and would take a good 5 to 10 mins to maybe kick back on and would be lucky to stay on for another hr or so but solved that as well as other problems and working on an sideways kind of bouncing idle or when stopped at a streetlight or at a complete stop and bad vibration and swaying while driving at different speeds . But check em out I work on what ever comes my way and always try posting
That bracket you fabricated is a genius idea! Thanks for sharing your story innovative repair procedure. I owned a 2000 5.9 & recently purchased a 1998 5.2 & both had the same issue & I used zip ties which was semi-successful but I'm going to borrow your bracket design. Thx again! 👊
Trump would call this car a shit hole. 🤔And if you can’t afford a $2:00 set of battery connection cables. You are more than poor Id call that homeless...🤣😂🤣😂👍
That was his name and because of him we had the greatest depression we've seen in almost a century. Now we have strategic civil unrest, and a over-hyped china flu infection and yet we are better than back then. Thanks for the painful reminder of the Obama era presidency.
Looking at what's happening Trump was doing way better then all the resent presents but now with the new present all the taxes are going up fuel and alot more. Now that they see what they have voted for it doesn't look like any one of them is happy either and NY i think it's pretty much done. Lots of people have moved out.
dying problem watched your video was the pos cable loose was getting ready to start on sensors you sure saved me some aggravation god bless guys like you that post this stuff on here
Love the random political outburst, lol. Thanks for the tips
" If I sound miserable, it's because I am."
That is funny... ☝😉 ... halfway through the video I am thinking that this guy sounds really annoyed. Nice bracket though.
Dodge Durango I felt a lot better after it was fixed. Lol
Could you make another bracket? I would gladly buy 1 off you. My 1998 Durango is doing the same thing.
Same my Durango is a 98 does the same thing
Can you make me a bracket? How much? And did it fix your problem?
$125
In my case With my very rough idle it was the maps sensor's vacuum elbow it felt really good no cracks but it looked like it was stretched out and losing vacuum on the throttle body side so I put a zip tie on the throttle side and the map sensor side and it fixed my problem by more than 50% but I'm still going to build that computer bracket too. Also make sure my o2s and catalytic converter are good.
The problem is usually really shitty battery connections because of the garbage connectors used by dodge and other manufacturers
So my 98 stalls and only stays on while holding the gas in the beginning and it'll stay on over all after idling it will shut off randomly what should I do?
If I had only seen this video before I purchased a recorded computer aftermarket. I was ahaving the same problem with the three main plug terminals. Eh...... you live .you learn.... hopefully.....
This is exactly what was wrong with mine found out when I pushed on the wires and had somebody started it would stay running for hours he's been is I would drive and hit a bump or something it would shut off found out it was just these plugs loose
Long story short did you fix it
Yes
But isn’t the Dodge Durango from the year 1999?
The durango started in 98 and still continues. This is a 2000
i know, they finished build in 98 and sold in 99
@@someone-pk4bg I know the still make them, I am not up on dodges that well.
Interesting fact, my 2000 Durango has both 1999 and 2000 model parts.
Really frustrating to order a part for the 2000 model year and its actually a 1999 model part.
Have a 2000 dodge durango and have few videos of my own if you guys ever want to check out I solved a pcm problem where the durango would shut off randomly here and there on long or short drives rain or shine cold or hot and would take a good 5 to 10 mins to maybe kick back on and would be lucky to stay on for another hr or so but solved that as well as other problems and working on an sideways kind of bouncing idle or when stopped at a streetlight or at a complete stop and bad vibration and swaying while driving at different speeds . But check em out I work on what ever comes my way and always try posting
Dodge still has not fixed that issue with the Durango...
It is a joke. We the buyers are getting taken everywhere for our money.
It’s a 4.7L
Looks like a 1999
It is a 5.9 2000
Could not agree more on Obama... worst president we ever had!
That bracket you fabricated is a genius idea! Thanks for sharing your story innovative repair procedure. I owned a 2000 5.9 & recently purchased a 1998 5.2 & both had the same issue & I used zip ties which was semi-successful but I'm going to borrow your bracket design. Thx again! 👊
The only reason you say he's the worst is because he's black ...smh
@@gcllns real shit
@@gcllns That's the only reason you can come up with?
Trump would call this car a shit hole. 🤔And if you can’t afford a $2:00 set of battery connection cables. You are more than poor Id call that homeless...🤣😂🤣😂👍
His name is Barack Obama, in case you forgot. By the way, Trump has been president for 2 years now... Are you rich yet?
Let me go get an alka seltzer since I read BO plenties name, I became rich when I read trumps first book. Did you ever read it?
That was his name and because of him we had the greatest depression we've seen in almost a century. Now we have strategic civil unrest, and a over-hyped china flu infection and yet we are better than back then. Thanks for the painful reminder of the Obama era presidency.
Might want to leave politics out of your videos, It’s not a good look.
That didn't age well, did it?
The president we had before Trump is looking pretty good to me right now.
That is a very funny joke.
Looking at what's happening Trump was doing way better then all the resent presents but now with the new present all the taxes are going up fuel and alot more. Now that they see what they have voted for it doesn't look like any one of them is happy either and NY i think it's pretty much done. Lots of people have moved out.
You got the old administration back. Enjoy your $5 gas.
YOU RICH YET? DID DADDY TRUMP MAKE YOU A LOT OF MONEY NOW?? NO SUBSCRIPTION
He did not take anything from me. I cant wait to vote for him.