How To Install A Skid Plate!! 2019 Subaru Crosstrek!

Поділитися
Вставка
  • Опубліковано 28 сер 2024
  • Whenever you need to add some protection to the underside of your vehicle, Look no further than the awesome skidplate made by Primitive Racing! They offer a full kit or each piece separate so you can fully protect your vehicle!
    Check them out!
    get-primitive....
    Check them out on IG!
    / primitiveracing
    Check out me on IG!
    / carsandcody
    Go show love to the awesome music artist!
    / flamingosis

КОМЕНТАРІ • 35

  • @51249ca
    @51249ca 2 роки тому +3

    Good blend of sarcasm, clarity, and explanations.

  • @wesley21878
    @wesley21878 Місяць тому

    Thank you for this video!!! Just did this to my 2021 trek today and am stoked with how it turned out!

  • @wrigman
    @wrigman 3 роки тому +1

    I have had Primitive racing full skids(three pieces) on every Subaru I have owned. Have a 2016 Forester and a 2021 Crosstrek Sport now. Slide save you from a lot of trouble, both on and off-road.
    The fomoto valve is essential for skid on oil changes. Especially if you bang your skids up a little. You play hell getting them back on. Learned that with the TOYOTA FJ Cruiser I had……
    OH! You MAY want to consider using the tube on the valve. It tucks up into the oil drain hole and comes out when draining the oil. Nice and clean job. Just zip tie it to the valve, it will stay put.
    Don’t understand the coolant draining to mount the front skid….🤷🏼‍♂️
    And also I trimmed the old plastic skid and used the sides to cover the sides of the engine, just tucked a 3/4” sections under the skid on either side….

  • @davidbalasco9462
    @davidbalasco9462 3 роки тому +3

    (*insert comment about compensating for crows foot on torque wrench*)
    great video as always

  • @mesapowerhouse1200
    @mesapowerhouse1200 6 місяців тому

    I was able to keep the factory front plastic skid on the car. I just drilled out the 4 spots where the standoffs are located so they would slide thru the factory plate. I wanted to keep the factory plate mainly for dirt and water mitigation into the engine bay from below.

  • @HomesteadOnThePreserve
    @HomesteadOnThePreserve 2 роки тому

    Great video and THANK YOU for giving the torque specs as everyone always forgets that.

  • @jlegasp
    @jlegasp Рік тому

    Getting William Osman vibes from this vid haha, great vid, just purchased a Crosstrek this year so excited to get some mods on it. Keep the vids comin' 😁

  • @MarksTech
    @MarksTech 3 роки тому +1

    lmao this video is awesome. informative, and with a splash of comedy

  • @awesomecomet3577
    @awesomecomet3577 3 роки тому +1

    Really cool kit and I know I should replace mine on my Solara because it is definitely sagging 😅

  • @michaelt1545
    @michaelt1545 3 роки тому +1

    wow krispy didnt hook you up with some grease monkey gloves??? smh lol. Awesome video! Keep them coming.

  • @Naixhan
    @Naixhan 2 роки тому +1

    Would rally innovation front rally light bar will fit with this primitive skid plate? Great installation vid! Thanks alot!

  • @francisbadavi9290
    @francisbadavi9290 2 роки тому +2

    Cody, I enjoyed watching the installation of the skid plates on the Subaru. I intend to use the same skid plate brand on my 2021 CrossTrek limited. However, I was a bit puzzled when you installed the differential skid plate. As I recall you removed one bolt completely and loosened three others before installing a bracket on the outside of the differential housing. My understanding of the differential housing is that it is filled with high viscosity oil to keep the gears inside lubricated. When you removed/loosened the bolts I didn't see any differential oil pouring out. Does this mean you drained the differential oil before loosening the bolts and just didn't cover it in the video? Just curious, thanks.

  • @manwithnoname734
    @manwithnoname734 Рік тому

    Amsoil filters 👌

  • @josemora6448
    @josemora6448 Рік тому

    Will the dealership still do your oil change if you don't put that oil valve? I can picture them complaining about it.

  • @rickt.4118
    @rickt.4118 3 роки тому +2

    Great video and tutorial. installing mine tomorrow. Did you need to trim the splash guards at all?

  • @fattypat3ck
    @fattypat3ck 2 роки тому +1

    Can you leave the plastic undertray? I would like the side covered still that the skid plate can't do.

    • @SojuBmb
      @SojuBmb 2 роки тому +1

      you can cut the sides out and reinstall them

  • @efoust
    @efoust 3 роки тому +3

    Do they protect the catalytic converter from being stolen.

  • @andrewandjelic
    @andrewandjelic 3 роки тому +1

    Is it possible to install the valve after installing the plates? Might want to take care of that next oil change...

    • @rickt.4118
      @rickt.4118 3 роки тому

      You can install it the next oil change. You will just need to remove the front skid plate prior (which will not be hard) or you will end up with oil all inside your skid plate.

  • @petersalas5215
    @petersalas5215 3 роки тому

    Good morning y’all

  • @immutablecantrip
    @immutablecantrip 3 роки тому +1

    That rear skid plate seems to hang down so low. Does it reduce the car's ground clearance?

    • @wrigman
      @wrigman 3 роки тому

      By about 1/4” at most……

  • @bigpapacooljay3510
    @bigpapacooljay3510 2 роки тому

    Can anyone send a link for the rear skid plate, I can’t seem to find it on their website

  • @jbinmd
    @jbinmd 3 роки тому +2

    Do you lose any ground clearance?

    • @wrigman
      @wrigman 3 роки тому

      You do, but it is minimal……1/4” at most…

  • @ryanjustman9169
    @ryanjustman9169 3 роки тому

    Mine also came all in one box jingling inside

  • @regchr.9403
    @regchr.9403 3 роки тому

    What is the most practical fact for using skid plates?

    • @wrigman
      @wrigman 3 роки тому +2

      They have saved my Subie’s from road debris as well as rocks off road. I have put them on a 14 Crosstrek, 17 WRX, 16 Forester and a 21 Crosstrek sport. They are cheap insurance.

  • @ryanjustman9169
    @ryanjustman9169 3 роки тому +1

    Hey.. i didnt get a hoodie...

  • @XijdliX
    @XijdliX 3 роки тому

    Are the plates compatible with an Impreza… essentially the same vehicle.

    • @wrigman
      @wrigman 3 роки тому

      Check with Primitive racing, but I think they will mount up..…