Gyrobee gyroplane, homemade step by step
Вставка
- Опубліковано 6 вер 2016
- Автожир своими руками. Процесс постройки автожира Gyrobee.
------------
Gyrobee gyroplane, step by step
------------
Многочисленные вопросы по поводу где купить, сколько стоит и как долго строить:
Я покупал базовый набор на сайте starbeegyros.com в 2012 году. Деревянный ящик набора виден на первых кадрах. Из готовых частей в наборе была только складная мачта. Все остальные детали изготавливались из материалов, которые по обрезались по размеру, сверлились, обрабатывались и прочее.
На тот момент я бы мог купить готовый набор (без ротора, двигателя, приборов), но намного дороже. Я решил, что буду делать сам, поэтому приобрел базовый набор, и все остальные части покупал по мере готовности моего проекта.
Пошаговый процесс создания я постарался запечатлеть на фото, которые делал на каждом этапе. После чего сделал из них это видео.
Весь процесс постройки я подробно описывал в моем блоге: rotorpt.blogspot.com
Чертежи я скачал бесплатно в интернете, ключевые слова Gyrobee by Ralph Taggart.
Огромное спасибо Александру Ламеко (ABM) за перевод чертежей на русский язык, и последующие консультации по постройке.
-------------------
Numerous questions about where to buy, how much it costs and how long to build:
I bought a basic kit (0.17 in this video) from starbeegyros.com in 2012. The wooden set box is visible in the first shots. Of the finished parts, there was only a folding mast in the kit. All other parts were made from materials that were cut to size, drilled, processed and so on. The rest was acquired as needed.
All aluminum pipes is 6061-t6, steel parts is 4130, bolts AN.
I can´t say how much because I built patiently (about 3 years). I bought many parts in England, France, Germany, USA, Russia, Spain. Turning and milling work are expensive and difficult to find, who could do it..
The final cost largely depends on the availability of turning and milling machines and free time.
At that time, I could buy a ready-made set (without a rotor, engine, instruments), but much more expensive. I decided that I would do it myself, so I bought a basic set, and bought all the other parts as soon as my project was ready.
I tried to capture the step-by-step process of creation in the photos that I took at each stage. Then I made this video out of them.
I described the whole construction process in detail in my blog: rotorpt.blogspot.com (in russian)
I downloaded the drawings for free on the Internet, the keywords are Gyrobee by Ralph Taggart.
Many thanks to Alexander Lameko (aka. ABM) for the translation of the drawings into Russian, and subsequent consultations on the construction. - Наука та технологія
When I was 14 yeas old I talked to a man at the local airport that had just built his own gyrocopter. He was very excited and it was very intesting to talk to him. I lived about 1/2 mile away from this country airport near Kankakee Illinois. I had to go home for lunch and wished him well and thanked him for his time. About 45 minutes later I heard him took off and rushed outside to watch him fly. Within 60 seconds and about 1/2 way across our cornfield he entered a steep dive and crashed into the cornfield behind my house. The fire truck plowed down the corn to get to him as there was a fire at the scene. They said he was about 18 inches deep in the soil, apparently he had made an adjustment to the yoke thing (whatever that is) and something catastrophicly failed. Of course he was killed instantly. I remember how terrible I felt just meeting this man and talking with him like I had just made a new friend. Then he was gone. My point is while gyros seems awesome I think there is a very steep learning curve, and they can be quite unforgiving, or so I've been told. Please dont over extend your flying abilities with these machines. I have never been in one and don't think I could bring myself to try it. Your video was very good, thank you for sharing with us!
I am sorry for your loss, and thank you for sharing with me this story. I will be very careful. Thanks once again!
I appreciate what you wrote, humbling
That guy is a legend. We'd all be lucky to go in a way as gangster as that guy. Rest his soul
@@jlo7770погиб?
@@fredmcalister7345 yes
learn to read!!
First time I'd heard this song was in 1969, Freshman in High School. My Brother was the best friend ever and Introduced me to all his music and Favorite Groups! I loved this song from that first listening. CCR was a great band. Still love their music. Didn't get to see them in Concert but I did get to see BTO in Eugene Oregon. Was an excellent Concert. Thanks for the great song! Excellent video and I really envy you in that little thing!
Excellent video presentation. Many helpful slides clearly showing different steps in the build. Inspiring music and the first flight at the end - BRAVO !
Every aviation videographer should learn from this.
Very cool video! Finally a good song playing. Loved the flying into the sunset
Great job. Thanks for documenting the process.
Очень за тебя рад. Мечты сбываются!
Came for the flying, stayed for the music!
Excellent video ! Great music and a well done step by step timeline. Thanks for sharing !
当初のジャイロコプターが創られたときはまだ、ソビエト連邦の時代だったね。私の友達も部材輸入して造って飛ばしてます。今では世界中にファンが増えた。事故も起きていますが、安全性を高めながら拡散してオードバイのように、手軽に買える時代なるのを期待しています。今も当時の原図は取り寄せて青春の想い出となっています（笑）Tokyo
One simple and beautiful gyroplane.
Wow, what a good job ! Thank you for documenting your work, it is awesome !
Gracias por compartir esta experiencia y muy trabajo manual, enhorabuena, ahora a tener mucho cuidado y a volar!!, es una aeronave que no perdona nuestros errores !!!!
Absolutely fantastic video thank you for sharing awesome progress footage
Beatiful work and effort... the music and flight with the sun behind...amazing archivement!
Thank you for posting this video , excellent build.
Nice color choices stands out ....
Thanks for shareing ..
Well done! The plane and the Vid.
I asked Richard what he wanted for his birthday.
He showed me this video.
I learned my lesson !!
A flying lawnchair ?? Huh
Great video Ann !
Fantastic project and photos.
Great Video...Great BUILD
mike Thank you Mike! :)
Brilliant! Great job guys
Great job, bravo
Хорошая машина автожир завидую отдельное спасибо за музыку Кридэнс Клир Вота Ривайвл
Спасибо, рад, что вам понравилось!
That was a joy to watch and Listen to, Thank You,
0:16 Wow! the bend in that pipe makes this design so beautifully elegant and brilliant, from an engineering point of view
Great video,with the wonderful music of CCR.
Beautiful job 👏👏👏👏👏👏👏👍👍
Very good job, man ..!! 👏👏👍👍
Awesome!
One of the cheapest way to fly.
Nice. Good music too.
Brilliant music choice
Круто :)
That's so cool man !
wow! so amazing
I love it!
Amazing!👍🏻✨
Thank you!
great video
Appreciate you 💪
Excellent build, I used to work for Stits Aircraft Coatings for several years and have a Bensen B-8M which I'm in the process of completely restoring and bringing the safety features up to date such as the redundant (double) mast to start with and a new offset gimbal head since mine originally had a "spindle head".
Which prompts me to ask if you are considering modifying your mast by either switching over to the double mast or by using an aluminum section of 1/8" 6061 T-6 on each side of your mast as it now is; the one thing which the PRA advised against at one time was painting the mast which tended to conceal any fractures which could lead to a catastrophic failure of the mast in flight with the original 2"X 2" masts which was standard for years on all gyros until either Dr. Bensen or Ken Brock developed the double mast after several fatalities due to the mast breaking in flight.
As I said, beautiful workmanship and thank you for taking the time to document your excellent build and sharing it with us.
Thanks for your feedback. When buying an initial kit, I was interested in this nuance from the manufacturer - Starbeegyros. Acording to their assurances, their engineer performed the calculations, and the mast of a square profile is not inferior in strength to two profiles, as indicated in the Gyrobee documentation.
As for painting - now I would not do it, because it complicates the construction and inspection of the structure of the device.
Sorry of my bad english, i think you get the point.
Inspirational
Very nice
Thanks for the video, how difficult is it to assemble one of these?
Good job😀👍👏🙏❤️🇹🇷
А Димон я узнал тебя..красава !Клипак -зачьот!
32Anatoly Ну ты Шерлок реально :) Спасибо Толян!
А чо на форум не бросил видос...?? ваще реально слепил красоту!Я тебя по узлам на основных стойках тока и узнал ))))хахаха..думаю где то я видал это уже))
32Anatoly Толь, да я скромный весь такой, кинь ты, если считаешь интересным :)
Ага, специфические детали, узнаваемые ;)
Потом как ниуть выложу ..знаешь да я просто если что то один раз увижу-как сфотал..уже помню долго.)))да и как своих посонов не узнать)))
Я щас Коммандера буду собирать с колесом от чебурашки ...))) свой на части раскидываю..раза в два легче будет..думаю летом полетать полноценно... а то 2 года в стройке ..соскучился уже пипец.
32Anatoly Давай Толя, дерзай, а то забудешь, как оно, воздух полной грудью.
Hi very nice build could you tell me where you purchased the kit from. Thanks Ruth.😁
Outstanding
Fantastic!
Nice😀
You are very patient in answering questions. What elevation do you fly at? Did you get a 503 in order to take off at higher elevations?
Flying over 300 feet is less fun. But it all depends on the surface, above water and forest you need to fly higher. I haven’t tried to fly to a great height yet.
Great!!!
Muito bom
Awesome video, definitely my favorite CCR song!! How long did it take you to build and roughly how much did it cost. Cheers
Hello Simon, i can´t say how much because I built patiently (about 3 years)..I bought many parts in England, France, Germany, USA, Russia, Spain. Turning and milling work are expensive and difficult to find, who could do it..
Can this kit still be ordered?
What was the price of complete kit and year purchased
Congratulations on the project my friend! I would like to know if I would be able to provide more details of the rotor head. I'm trying to start one but I can't find the details of the rotor head anywhere.
Yeah CCR!!!!!!!
you all may consider a big bigger wheels is the terrain you will use to take of is not paved...with carved wheels of course if it has vegetation...you can also put a pair of floters if you wanna land in water
Rotorpt i have few ? First where did you get the kit from? How much does the kit cost $$? I saw you taking off how safe is that kit to fly it? Thank you for your time.
Olá José, the basic kit was purchased from Starbeegyros. The cost depends on the configuration, it is better to look at their website. The device is reliable, proven hundreds of built copies in the United States. Abraço
Kudos! Kit built?
I want to build one, where did you get your parts from?
Hello, I ordered basic kit in starbeegyros.com.
Nice
i don't know but why do you use steal and not aluminium for the frame because it would be lighter but maybe the aluminium is not strong enough for the frame ? And how much does it costs when it's entirely finished ?
I made all according to the drawings calculated by the engineer and the author of this gyroplane - Ralf Taggart
Hi: I was looking through the plans for this gyro. I purchased a piece of aluminum tubing to try drilling close to the inside edge with out damage. Could you tell me how you deburr the inside of the holes when they are close to the inside edge? I cannot see how to do this with out possibly scratching or possibly damaging the wall during this process. Thanks for the video and your time.
I'm sorry, I think my English will not allow me to explain these details. I tried to drill on a piece of square tube, and set up the drilling machine so that the gap between the hole and the wall was minimal. It took some time. First I drilled with a smaller drill bit, after which I used straight shank straight flute chucking reamer
rotorpt Thanks for the information. I just tried it with a 15/64" drill and .250" reamer. I allowed .030 wall to bolt and it seemed to work. Thanks
I would like to build this gyroplane. Did you purchase it as a kit? If so, where did you find it for sale. ABSOLUTELY AWESOME JOB . Terry
Hello Terry, I bought a basic frame set at starbeegyros.com, now this starlightsportaircraft.com. Thank you!
Thank u..for sharing..from where u took the dimensions?
Hi Yusuf, I did everything according to the drawings available on the Internet. Search for information by "Gyrobee", by Ralph Taggart.
Woow , greet from Iraq to u
Need to paint two big Bug Eyes on the instrument dash cover. Add some black hornet stripes to the tail ..
The two main big-ticket items are the engine and the rotor. Each typically in the thousands of dollars (95K to 130K RUB).
Согласен, ротор и двигатель одни из самых затратных частей. Ротакс 503 уже не выпускают, ротор DW тоже.
best way to across the ocean to reach italia from turkey
where did you get the plains to build gyrobee
I did everything according to the drawings available on the Internet. Search for information by "Gyrobee", by Ralph Taggart.
Здорово! Красивая вещь получилась. А как летает!
Согласен! Спасибо!
What was your total build cost, and how long did it take to build?
I can´t say how much because I built patiently (about 3 years)
Very close to the original Benson design
how long did it take to build it ? Where to get the parts ?
Numerous questions about where to buy, how much it costs and how long to build:
I bought a basic kit from starbeegyros.com in 2012. The wooden set box is visible in the first shots. Of the finished parts, there was only a folding mast in the kit. All other parts were made from materials that were cut to size, drilled, processed and so on.
At that time, I could buy a ready-made set (without a rotor, engine, instruments), but much more expensive. I decided that I would do it myself, so I bought a basic set, and bought all the other parts as soon as my project was ready.
I tried to capture the step-by-step process of creation in the photos that I took at each stage. Then I made this video out of them.
I described the whole construction process in detail in my blog: rotorpt.blogspot.com (in russian)
I downloaded the drawings for free on the Internet, the keywords are Gyrobee by Ralph Taggart.
Outstanding brother, where could I buy this kit??
Hi Nicholas, I ordered basic kit in starbeegyros.com (in 2012, if not mistaken)
Super music 👍👍👍 ? Iron butterfly ?? 1972???
Creedence Clearwater Revival - Born On The Bayou ;)
Which engine did you use?
Rotax 503
I'm searching for this kit, but can't find it. Where to buy? Thanks for help.
starlightsportaircraft.com/gyro-kit ;)
What kind of engine did you use?
Rotax 503
Michael, there is a phenomenon specific to gyrocopters known as PIO which although it is referred to as pilot induced oscillations I personally use the term Pitch Induced Oscillations since the pilot did not initiate the initial pitching movement which then sets up a series of over-controlled reactions to the aircraft's nose pitching up, then down, once again up, and finally down and over, upside down into a fatal loss of any ability to recover, if I remember correctly this usually took about two and a half seconds from start to finish and is seldom mentioned when anyone who has one to sell seems to forget to mention when telling you how easy they are to fly.
This is why I "built" my own, a Bensen B-8 gyro glider which can be towed behind a car or tethered to a heavy duty steel stake and flown like a kite on a good industrial rated rope when the wind is steady at 25 mph and you can get up to a hundred feet off the ground for as long as you have lift.
I found a guy on UA-cam that runs a gyrocopter flight-school and he does talk about it. He says that too many people think just because gyrocopters are mostly in the realm of hobbyists machines, you don't need training to fly them. He says that out of all the aircraft you can fly, gyrocopters are the easiest to learn and by far, the safest to fly, especially in regard to small aircraft flying in gusty or inclimate weather. He says that he starts people out on drag behind machines, then through two other stages.
As I understand it, most people who die in gyrocopters a) have no training. b) Have a lot of training in small air planes. It's habit or intuition that gets people. If your small airplane starts going nose up, airplane guys quickly stick down to pull out of it. I believe if you do that with a gyro and your dead. It's my understanding that you decrease thrust or bank out of it in a gyro. I've heard "never ever nose down in a gyro". I guess it's flat, nose up, or at risk. I'm not a pilot of anything, I've just been considering aircraft for a while and parroting what I've heard other people say. I will say this, I don't hear any person trying to sell other aircraft that tell talk too much about all they ways you can die. It's just not good salesmanship. Also notice that most all of the gyro guys are old. Makes me think that they've been doing it a while...
is that a kit how much $ NICE JOB
Сколько стоит такой кит набор и где купить
How many hp in this plane engine ?
Rotax 503, 52hp
Donde puedo comprar un kit de construcción de un autogiro como ese ?
Where can you look into this kit?
see all information in starbeegyros.com. I ordered basic kit only.
How much might a build like this cost and how long might it take?
This is a compromise, for everyone in different ways, depending on employment, access to machine tools, financial investments. It took me about 3 years, leisurely
@@rotorfly07 what might a build like the video realistically cost?
If you do not mind me asking, what was the approximate total cost?
It has been a dream of mine for years to own one of these.
Thank u for your time.
Numerous questions about where to buy, how much it costs and how long to build:
I bought a basic kit (0.17 in this video) from starbeegyros.com in 2012. The wooden set box is visible in the first shots. Of the finished parts, there was only a folding mast in the kit. All other parts were made from materials that were cut to size, drilled, processed and so on. The rest was acquired as needed.
All aluminum pipes is 6061-t6, steel parts is 4130, bolts AN.
I can´t say how much because I built patiently (about 3 years). I bought many parts in England, France, Germany, USA, Russia, Spain. Turning and milling work are expensive and difficult to find, who could do it..
The final cost largely depends on the availability of turning and milling machines and free time.
At that time, I could buy a ready-made set (without a rotor, engine, instruments), but much more expensive. I decided that I would do it myself, so I bought a basic set, and bought all the other parts as soon as my project was ready.
I tried to capture the step-by-step process of creation in the photos that I took at each stage. Then I made this video out of them.
I described the whole construction process in detail in my blog: rotorpt.blogspot.com (in russian)
I downloaded the drawings for free on the Internet, the keywords are Gyrobee by Ralph Taggart.
Где брали ротор?
Напрямую у Эрни, DW 22"
Hello admin I want to know more about it
Where can I buy plans?
not a buy, download free. Gyrobee by Ralph Taggart
Great video!!, where can you buy a kit like this!!!!
This is my question too! Where do you buy these things? I have seen countless video's of gyro copter's and have yet to see anyone telling us where to buy one. Is it the world's best kept secret or something like that. The site's I have gone to are so vague about purchase, it's like they don't want our business, like Bensen copters in NC. Cheers. anyone that finds any info Please pass it on.
I bought a basic frame set at starbeegyros.com, now this starlightsportaircraft.com
I would like more information on acquiring a kit for a gyrobee aeroplane.
Tom Burns
Hello Tom, i All the documentation is available on the internet and rotary wing forum, the search keyword is "Gyrobee". Parts of the gyroplane or the kit can be bought at the site starbeegyros.com. I documented the entire building process, available at rotorpt.blogspot.com but in Russian. Good luck!
dope
What is the overall weight of this ?
120kg without rotor
Where do you order a kit?
I ordered basic kit in starbeegyros.com
а где вы покупали такой кит набор и сколько денег?
Базовый набор покупал в штатах, там была только мачта готовая. Все остальное своими руками. По тем временам кит базовый около 2к евро обошёлся
@@rotorfly07 понял, а ссылка на продавца осталась?
@@GVL224 не знаю, активны ли они до сих пор, ищите starbeegyros
Why gyrocopter is not cummertial?
Great giroplan. Is it possible to buy?
Hello, please send me email
what is the brand name for the brake drums ?
The brand name of whells and brake drums is Azusa
thank you my friend ~!!!!
Hello, what will be the cost if you prepare that for selling?
Hi, I can´t say how much because I built patiently (about 3 years)
rotorpt could you please prepare anorher one? And then sell that?
Dilawar, I responded to your email, but in return received the following notification: The email account that you tried to reach is over quota
rotorpt my apologies! I have fixed the problem. Now I receive the emails without any problem. Please resend the email and I will get that.