How To Make a Rocker Panel & Truck Bed Floor with an Eastwood Brake

How to fab a rocker panel and truck bed floor.
See the Metal Brakes: www.eastwood.co...
The Eastwood Versa Bend 20 Inch Offset Sheet Metal Brake is a precision engineered metal working tool designed to produce both standard variable length bends as well as accurate 1/2 Inch offset bends up to 90 Degrees in 20 gauge sheet steel and 18 gauge aluminum in widths up to 20 Inch. Also capable of creating bends in 18 gauge steel in widths less than 12 Inches.
CREATE:
Floor reinforcement
Channels and ribs
Sections of corrugated pickup bed floors
Truck bedside panels
Inner fender structures
And much more all with one convenient vise or bench mount tool.
For more information on Eastwood products visit www.eastwood.com or stay connected with the team via:
Facebook - / eastwoodcompany
Instagram - / eastwoodco
Blog - www.eastwood.co...
Eastwood has everything you need to do the job right when you're restoring a car, truck or motorcycle - from welders to paint and everything in between.
Are YOU an Eastwood Guy?

[@olivierroy1301]

I wish infomercials were that interesting when I was younger and we only had tv. Nice videos.

[@e-games4331]

I suggest you put an angle guide (protractor) on the side of the metal sheet brake to have a perfect angle needed at every fold.

[@larryhooker2524]

I love that break

[@dannychiguina3962]

Hello, My name is Danny I own a 1975 Dodge D100 Reg Short Bed pick up truck most common rust problem are the roof and I leave on Guam USA. I enjoy watching your shows. How make roof panels thanks.

[@nourbutwatmi]

As always, a very informative video. Thanks

[@markhanson1452]

Also I put wing nuts on top of my bolts it makes it fast and easy to change .

[@pl5624]

That should be standard on the add on fence and that removable fence on the front.

[@billjones5178]

Thanks for video! How about adding an attached angle gauge to end of lift part, and then lift each bend to angle recorded on your pattern piece. Ie lift bend to say 55 degrees, stop each time. All same then

[@jeffryblackmon4846]

Very good display of the products and their uses. Thanks.

[@fakeedge901]

Thanks guys. Your videos are awesome. I really enjoy watching them and learning from them.

[@jairogomezmarin928]

Excelente 👍 para Cali Colombia 🇦🇲

[@leonardogabrielquevedo9272]

Excelente vídeo! Muy útil y práctico. Gracias

[@mikedaran6715]

God bless all of u really great job

[@OldSkoolF]

NICE Finger Brake!!!

[@Tracks777]

Quite good video, awesome!

[@diegorenoj4020]

Good machine.congratulation

[@TheSkoto1]

will the pan break do those same breaks

[@SupaNautica]

Would be good to have an episode on the cars you guys have worked on, all in one video and have links and explain what viewers can expect to see in the links. I'm keen to see a
update on Matts Pilothouse, it's been a while since I've seen any videos on it. Ask him to check out my body swap videos, I'm doing a Panel right now. Cheers

[@eastwoodco]

Hoping to release a web series featuring these cars once we get some more work completed.

[@alenamayrivera4681]

SupaLexy CH1

[@tomthompson7400]

do you guys make these machines your self ,,, or ship them in from china and have them painted in your shade of blue
thanks

[@jaychino1621]

can you bend 16 gauge galvanized welded wire?

[@HodgePodgeGarage]

thanks guys. you should send me one or all of them to play with. hahaha

[@alfredocastillocardoza2236]

Cuánto cuesta una plegadora de 2,40 mts, para envío a Perú?
Gracias

[@crapschamp9986]

1997 s10 rocker panels Fab and welding mine are rusted bad how to prep for panels salt rusted them .show repare video.

[@jagrajsaggu190saggu9]

Good work

[@rjdiaz54]

Do you offer a 48” Versa bend ? Thanks

[@aminawaramohamad8505]

what happen if we want to bend the plate oversize

[@kanhaibudhu8601]

Lovely.

[@brendamciver1320]

How much does the 48” Eastwood pan and box brake weight

[@eastwoodco]

Approximately 350 lbs.

[@arthurgamino]

Make a custom off-road bumper with a winch for a1991 Mercedes Benz G-Wagon

[@TheRealAshiboy]

sound/vid delay?

[@tomv8346]

audio not syncing up.

[@nilugajjar8205]

Can I come to your company for trying

[@anwarnuris5393]

Can i buy it

[@danielporter892]

Only in the interest of making this even more informative. Make mention of the gauge of steel you are using and the capability of the brake.

[@jayq7463]

In England we call these a bend not a brake

[@johngurney1069]

easy making a small sample show us making the full size its ok if you have the money to purchase very large machine and space how many people can afford them

[@shaijups1113]

Is it available in India??

[@tomthompson7400]

probably available FROM india

[@shaijups1113]

@@tomthompson7400 Indian dealer details please

[@tomthompson7400]

@@shaijups1113 take a look on ali express etc , eastwood do not make these , they are exactly the same as the rest of the chinese stuff , except a different colour , e bay is full of exactly the same , why pay for the sticker .

[@luvstruck2733]

To get your point across, you are going to have to make that small piece. When you start talking about turning it around after making a bend, IT IS IMPOSSIBLE to follow what you are saying, just from that statement alone.

[@georgespangler1517]

LOL,,,I saw it was backwards,,,and couldn't tell you,,,,I've been bending metal in home construction for 30 years,,,,now into cars,,,,all the same principle

[@scullerlmt]

Good video but quit interrupting each other.

[@crashk1955]

Rockers for very small cars

[@12vLife]

shortbeds for the circus.

[@sidndlovu442]

Two plate stove

[@sidndlovu442]

Making

[@nilugajjar8205]

Can I come to your company

[@nilugajjar8205]

Can your tech Me ?

[@bambumbambu]

how do you make a box like this? ua-cam.com/video/VRUF0XmeSAs/v-deo.html