Bee Smart Fully Automatic Water Level Controller with Dry run Protection & check corporation line.
Вставка
- Опубліковано 17 вер 2024
- For purchase click on link www.beesmartwl... or
Contact 9971583615 Email: bee.smartwlc@gmail.com
Suitable For : 0.5 / 1.0/1.5,2.0 HP Mono Block pump, sump pumps 190-250 VAC .
Package contains: Automatic Water level controller BEEWLC-5 1 unit, User manual 1 No .
Level sensor 5 nos Red, Green Black, Blue S.S 316 material rust proof . 4MM X 12 MM SS316 Screw 2nos.
Installation : Install the water level controller . Connect the INPUT OUT PUT . As shown in the User Manual There are out of three sensors, Green sensor put at the bottom Level, Black sensor put at the middle Level, and Red sensor at the top Level of the tank. Fix the 4mm screw before motor with blue & green wire in section pipe . If you have under ground tank than hang green & blue sensor in under ground tank as drawing. Note section pipe only non conductive metal .
Working :When the water level in the tank becomes low, means water get down from middle sensor, motor get switch on automatically. The tank starts filling up. when the water level reaches to the middle Level 50% Water LED ON. when the water level reaches to the higher level, the top level sensor sense. The motor automatically gets switched off. Also LED Indicator power on,50% water & motor on . If water source not available by any reason motor switch off within 60-80 second .again start motor when water available or restart power . No water waste. No Man power is required. save water, save energy, save motor with dry run protection.
Warranty: 1 Year Replacement . No warranty if ,seal broken , any damage .Replace from our godown .
Manufactured by Baba Electric & Electronics ( Bee Smart ) GURUGRAM Made In India Product.
Note: Bee Smart have many Types of water level Controller .Please watch videos of our Product for model selection & Installation before next order
Our UA-cam Channel :- / @beesmartwlc
Please Please……! give good rating ,Like ,share, subscribe, and suggest to your nearest for using our product .If you satisfy .
Let's say tank is full and all three sensors are immersed. Now if u only keep Green wire and Red wire immersed but remove Black wire, will motor start? I am trying this for municipal water auto pumping. Please try as above and let me know.
nice video.
price ?
Price?
Can we use this switch for 3 HP singal phase water pump for dry run protection
Kaha milegaa
Please visit us on
www.beesmartwlc.com