I have had my F170 for right at 2 months and decided to open it today. I was very nervous about all the settings but your video made it so simple. Thanks for taking the time to explain all the little details, very helpful video.
Hi Angel , I like the F170 printer, I have ET 2720 converted to sublimation and I have a problem with the ink and the waste basket and without warranty. Thanks for your recommendation it has clarified my doubts😀
HELLO, I HAVE THE EPSON 2720, BEEN HAVING ISSUES WITH THE BACK PAPER TRAY, I BROKE IT SOMEHOW. I JUST BOUGHT THE EPSON ET F170 PRINTER A FEW MINUTES AGO. NOW I HAVE WARRANTY.
So my prints are transferring very faded from the Epson 170. Is this because of the cotton content? Am I printing on the wrong side of the paper? Wrong heat settings, timing? Is there a setting cheat sheet?
Thank you so much for this video! You are the best. Step by step is what I needed. I’ve had my printer for 7 months and I was afraid to install it. 🫢 Thank you! 💖🙏🏼 You have a new subscriber 💓
I have the same printer & paper however, I too thought the paper was the same on both sides, so I wasted a sheet by printing on two sheets, first on one side and then on the other. For me the image did not print onto my substrate from one of the printed sheets of paper. Taking a closer look at the paper, one side looks slightly shinier than the other, and that was the side that printed to my substrate, the other side transferred a very faded image to my substrate . In my experiment I was printing to a koosie cup.
Yessssss congratulations on your newest toy! Everything came out beautifully, did you get the image off Etsy or did you design it? Could you show us how you would design it?
Hello recently purchased the f170 printer can anyone help me to change document size to half a4 size for mugs I tried to change it but it doesn't seem to fit the half a4 size when I print preview . Only printing at A4 works without any problems
Im having troublevgetting black to be black on the coffee mugs, its different shades of brown on lie 10 different tries trying different temps and times!!
I have the same printer and paper…the paper has a shiny side and dull side….please be sure to put the paper in shiny side down…which is the print side.
@FemmeTechie is correct. There is a specific side on the Epson paper to print on. If you look closely one side is white while the other side is off-white. You should be printing on the white side only.
I have had my F170 for right at 2 months and decided to open it today. I was very nervous about all the settings but your video made it so simple. Thanks for taking the time to explain all the little details, very helpful video.
Hi Angel , I like the F170 printer, I have ET 2720 converted to sublimation and I have a problem with the ink and the waste basket and without warranty. Thanks for your recommendation it has clarified my doubts😀
HELLO, I HAVE THE EPSON 2720, BEEN HAVING ISSUES WITH THE BACK PAPER TRAY, I BROKE IT SOMEHOW. I JUST BOUGHT THE EPSON ET F170 PRINTER
A FEW MINUTES AGO. NOW I HAVE WARRANTY.
Can you use the regular hiipoo sublimation ink in this printer (f170)
I have learned that if you wet the very tip with a little wet finger and if it is sticky that is the correct side to print on. Just a little tiny bit.
So my prints are transferring very faded from the Epson 170. Is this because of the cotton content? Am I printing on the wrong side of the paper? Wrong heat settings, timing? Is there a setting cheat sheet?
If you're sublimating on content, it will look faded. You need polyester.
Do you like the F170 or the ET8500 better? I see you have used both.
Thank you so much for this video! You are the best. Step by step is what I needed. I’ve had my printer for 7 months and I was afraid to install it. 🫢 Thank you! 💖🙏🏼 You have a new subscriber 💓
I have the same printer & paper however, I too thought the paper was the same on both sides, so I wasted a sheet by printing on two sheets, first on one side and then on the other. For me the image did not print onto my substrate from one of the printed sheets of paper. Taking a closer look at the paper, one side looks slightly shinier than the other, and that was the side that printed to my substrate, the other side transferred a very faded image to my substrate . In my experiment I was printing to a koosie cup.
How well do the shirts last in the wash? How about the mugs in the dishwasher? Thanks.
Question? Did you use the same paper for T-shirt and mug?
Yessssss congratulations on your newest toy!
Everything came out beautifully, did you get the image off Etsy or did you design it? Could you show us how you would design it?
H i want to know if u used the same ink for Epson the edin ink is good enough for sublimation??
Where did you get that printer from? I looked on Amazon couldn’t find it not even the ink for it
Can you tell us if the waste basket is able to be replaced when full?
Hello where did you purchase the printer
How did you mirror the image ?mine will not mirror the image … even after I select mirror image in circuit design studio …
I am trying to print a sublimation print for a 20 oz tumbler and it is cutting off the print way to short. Not sure what to do
Awesome will it give you the white on dark colors
Hey boo!!!! I love it!!!
Thank you ☺️
The website on amazon for the printer isnt correct, i was trying to purchase the printer but the address is wrong
🙌🏽🙌🏽Congrats another new toy
Thank you ☺️
Hello do you have to use the epson ink and supplies thank so muchb
No, you don’t.
@@AngelBDesigns Thank you so much. Now I can get one
Where do you get the refill ink?
Hello recently purchased the f170 printer can anyone help me to change document size to half a4 size for mugs I tried to change it but it doesn't seem to fit the half a4 size when I print preview . Only printing at A4 works without any problems
The paper that came with mine only has one side you can print on
Im having troublevgetting black to be black on the coffee mugs, its different shades of brown on lie 10 different tries trying different temps and times!!
Step by step..thank you so much
So annoyed. I was going to purchase this printer but it's not available in the UK only US so back to square one with searching :(
Okay 👍🏻
Thank you for sharing
Thankyou❤
😍
I didn’t receive no paper with it
I have the same printer and paper…the paper has a shiny side and dull side….please be sure to put the paper in shiny side down…which is the print side.
Mine didn’t have a shiny side and dull side. Otherwise, I would have stated that love 🤷🏽♀️
@FemmeTechie is correct. There is a specific side on the Epson paper to print on. If you look closely one side is white while the other side is off-white. You should be printing on the white side only.
THIS IS THE WORST PRINTER I HAVE EVER USED. I LIKE MY Converted. CONVERTED W7710 better. Don’t do it🤨🤨🤨🤨
I'd suggest only using a dictionary while you use it look at the word creator The end is filled with an OR not an AR