How to Remove Surface Rust from Original Paint! - Patina Paint Trick!
Вставка
- Опубліковано 3 сер 2024
- Hey everyone and welcome back to Iowa classic cars! Today I will be showing you a trick to remove surface rust and stains from original paint on old cars. These cars have lacquer paint from the factory and its actually quite beautiful if you can remove the true rust and stains from the paint. I would never remove the patina from a car, but surface rust on top of original paint does not look as good as just the paint itself, so try this trick on your old cars and trucks if you want to get rid of that pesky rust without damaging the paint! Thanks for watching!
Check out these other awesome car channels!
@mortske repair
@Old Car Alley
@Puddin's Fab Shop
**Products I use!
Rode VideoMicro Microphone - amzn.to/3daWiAN
Ratchet Straps - amzn.to/3tNc5fh
Axle Straps - amzn.to/2N6aZdt
Badland 12k lbs Winch - amzn.to/39Zgpjo
Badlands Wireless Remote - amzn.to/2MNIBNl
**As an Amazon Associate, I earn from qualifying purchases - Авто та транспорт
Vinegar and water works well too. I soak old cast iron carbs in it over night and clean with a wire brush. Works great.
I tried that and it stripped my paint right off
The trick is to perform this in a shaded area with the surface cooled. Keeping the surfce wet and allowing the CLR to desolve the rust.
Correct!
Nice, keep the pad flat under your hand, you will cover more area and not risk putting grooves on the paint.
Keep up the good work!!
A sanding block, or a flat piece of wood, on top of the pad would do the trick. Also, the glove advice is good. Lockjaw would NOT be fun but even a simple cut can become infected. Think of your girlfriend too!
Ryan truly enjoy your passion and dedication to old cars. I too have a couple 64 c10 and two door 69 nova. Great tech tip with clr can't wait to try it thanks.
Thanks Chris!
We've used that stuff even on old school toolboxes and it even polishes out sun fade!! It's pretty awesome stuff!! Keep up the good work!!
Thanks man!
@@IowaClassicCars Thank you sir!!
Hi there. I really like your videos ..And there seems to be plenty for me to watch ! Excellent content old bean. Very enjoyable to see you saving these cars -etc. By the way, Hello from England.
Thanks man!
Great tip!
Damn that's quit an improvement. Good job.
thanks man!
Great info. Thanks!
Thanks for the tip brother, I have a 48 Ford 4door sedan that will be getting the CLR treatment soon! Thanks for the great videos 👍😎
Glad it helped!
Tanks for the demo.
Wax on.... Wax off. It looks great! I never thought of that. The green pads are supposed to be non-scratch. The dark burgundy ones will take the paint off. They will also take meat off of your fingers if you're not paying attention. Ask me how I know.
Looks great! Bought a few jugs, going to try on my original paint Bonneville. Sitting since 1977
Good luck!
Really great results!😁👍
Thank you!
Great transformation!
Thanks buddy
Great job, can't wait to more of the old girl
Thanks Rob!
That's awesome !
Thanks!
Great video, the CLR mixture does work great for this 👍
Thanks man!
That's Crazy!! Cool thanks
thanks for watching!
Thanks for the video
Good to know !
Well done...resourceful use of CLR!....also consider applying Boiled Linseed Oil after, to seal the patina..
Thats nice. You can then use a polisher on it after and bring it out even more !
Exactly!
Thanks for the video,but I would have liked to see this done on some of the "rustier"areas like the high points on the quarters and on the trunk to see what it does to them.Not expecting it to do as good,just see the end result.Then what's next ? Polish,linseed oil ,flat clear coat ,to protect it from the elements.
I believe the color that shows where the paint is burned off is the factory primer
The quarters are actually primer. The paint has worn away....so thats why i didnt do it on that
Ryan, nice job and inexpensive. Just some elbow grease. Thanks for sharing. Big Al.
Exactly!
Next one cup vinegar with one cup Don blue dishwashing soap put it in a microwave for 1 minute heated up put in the spray bottle go around spray all the rust and let it sit on it like overnight and the vinegar will eat the rust off
Hey Ryan great idea! The car is looking good. Are we going to see it on the road soon? I noticed the license plate on the back. And just wondering if we are going to see the '59 Impala coming out of that ravine soon? Looking forward to that too.
Yep very soon :)
I use the same method, and passed the information on two other UA-camrs. I find lime away product work quicker. Then I clay bar and buff, 2 codes polish, three coats of liquid wax... High gloss Turtle Wax. On dark cars I use a anti squirrel polish last. Thanks for sharing.
Thanks for watching
Nice tip...I’ve used Ajax or Comet scrubbing powder before
Thanks!
great trick! I use it to remove the superficial rust from the chrome of the motorcycles: a steel wool soaked in soap and you rub the part without crushing.
Nice idea of leaving the patina on the body paint .... do you think you can apply a coat of clear coat?
You could, but i dont!
How did it last over the years did the clr eat the paint over time
I assume after doing that you would then use a polisher/wax? What particularly do you use?
And it's a FOUR DOOR. YES.
Yup all cars matter!
Hallelujah
Four in the back 2 if they fat 🤷🏻
Four doors means more whores!🤣
@@sal5608 lol yup
A combination of steel wool, Windex, and crumpled newspaper will polish the glass to a high sheen.
Just takes time!
My dad had the same 65 4 door green impala .283 and a powerglide
Nice effort Ryan. You're aware the rust will quickly come back to the surface? Show us it again on another video when it returns.
I will. Ive done this on multiple cars and even on my 2 dr wagon. Hasnt come back after 4 years of owning it.
I love the four door hardtop Peter Fonda drove in crazy Mary and dirty Larry
Vinegar n water works to
Will this method work on the thicker rust like I saw near the corner of the rear window and on the fenders? Thanks and nice job...
Phil
That im not sure of
Hey Ryan nice job Do ya have to protect it now to stop it rusting again?
in my experience, as long as it isnt driven daily in rain storms or snow, the rust wont come back!
@Randall Johnson linseed oil is EXTRMELY flammable, and i have seen too many people lose garages because of it. i do not recommend using it for that reason
What do you put on after as a protectant
I'll be able to remember that
Hope it proves useful!
Are you going to spray a flat clear or satin clear on top to preserve it ?
The paint will actually stay preserved pretty well as is
hi l really enjoyed how you removed the rust on that car but after that you should put car polish on it and that car polish on it it is called California gold you can but one at your local orils store the wax kind it is roung and when you open it it is pink in color and when you put it on that car it will bring out the rell blue shine and it will be smooth to so let me know if that works out for you alright
John - thanks for that tip of following up the CLR with some California Gold paint polish. Appreciate it.
Would this work as well on the frame of a truck with light surface rust ?
No
Dam, i kinda want that car.
its for sale, more info in a future video :D
By gloves I'm pretty sure people meant something like Nitrile gloves.
Yeah i should
Nice, how does CLR work on rust to the metal, no paint?
not sure
So, will that yellow residue left on / in the paint buff out completely?
It did for me after a rinse but idk for evrryone
How would i get rid of grinding sparks off my vehicle
Now just buff and polish.
Online it says that clr will damage paint, should I still try it?
The results are in the vid, i like it but do what you think is best
Wasting a lot of money buying CLR. Use white vinegar $2! 4:1 mix with water.
How much can CLR be? 6 bucks?😄
What yr is your Camaro?
81
Hi there does this work if your bonnet is black?
I replaced my original bonnet-my bonnet is steel
Please get back to me..
Thank you 🙏🏼
youd have to try it, not sure
What should you do if you have surface rust after you primer a car ?
redo the primer & bodywork
So this is a driver now? Last video you did was first start. Looks like now licensed and on the road.
It will b...check back 👌
Will that rust come back tho? After a couple of days?
It didnt on this car lol but i guess im not 100% sure. Might not be a bad idea to wipe it down with wd40 or something afterwards
Yeah i means its just surface rust but do you think surface rust forms because there is rust under the paint? or just because of the rain maybe? Idk its wierd , had the same problem but i hit the paint with sanding paper and it came off , so it just made me think if there was maybe rust under the paint ? 🤷♂️
@@pol-ek3yq i think honestly just gaps in the paint, not rust underneath
Is it for sale?
Yes it is. Ill have more info in an upcoming video
How to take out water spot
I've used this technique several times. You shouldn't do it out in the sun and make sure to wash it off with a good car wash soap . I'm sure you know the linseed oil trick ?
Linseed oil is so flammable, i do not use it
@@IowaClassicCars your rags will be just dispose of properly
@@IowaClassicCars hey if you interested in selling that 396 out of 68 let me know I live south of eldon Iowa
Howdy !!
Hello!
Man u like me a belair nut i also own a 63 impalla ss chevy nova ss 5speed stick 69 firebird
Will wd-40 work?
No i dont believe so
Go over it with that, then a buffer...... Looking good.
Thanks Howard!
@@IowaClassicCars Question..... what made you fall in love with the 59 Chevy's? For myself, dad had a 59 Parkwood when I was a kid..... I just loved the styling of that car.
Honestly im not sure. In the beginning i just hated to keep buying parts from resellers lol
All you need to do is the rest of the car. Great
the rust was UNDER the paint. will start returning soon after the solution dries
Thats why people put linseed oil over top, so it doesnt come back
Guys I’m just not into that! Am I the only one left that likes a good paint job?
Paint jobs and labor rates are too high for the average joe
@@IowaClassicCars it's cheaper to paint it yourself, like, a lot cheaper.
If there is rust on the paint , it must be so thin the metal is rusting underneath, that's what paint is for, to stop metal rusting. I can't see the point of what you're doing.
Looks like crap, patina looks crap. always. Spend the time and do it right and paint it.
He is going to flip the car so the next owner can paint it.
I forgot when i asked your opinion. If you want to donate 10k to paint it....ill paint it whatever color you like!
@@IowaClassicCars you didn't ask, I gave it to everyone for free. Patina is for lazy people and looks like crap. Give me 10 k and I'll paint it and walk away with 9.5k profit.
@@mitchevans1692 maybe if you use house paint lol
@@IowaClassicCars now you're just showing your age and lack of knowledge, $500 is enough for materials, paint and bodywork isn't rocket surgery, yes it takes time and effort that flippers don't want to invest. $10k is for a SEMA quality paint job and that car isn't worth it. Understand that I'm not hating on you, I'm hating on patina as something that is supposedly cool or desirable, patina is a french word meaning " needs a paint job "