Easy vacuum line fix

Barbed vacuum line adapters www.amazon.com...
Mustang repair playlist Mustang Maintenance and repair
• Mustang Maintenance an...
I am an amazon affiliate, so when you purchase through the links I provide it supports the channel with a small referral commission. The price is the same for you.

[@prestonnormile9996]

A little bit of liquid electrical tape over where you mated the hoses will stop them from backing out or otherwise seperating

[@michaelmendez9423]

Watched this video in the morning now night time i broke the same vacuum line but luckily i have a little bit more of the hard line to play with

[@RaulSavala-em1vb]

That's amazing, ,neato👍😉

[@hamzahrashid191]

My one split like a line throughout the whole hose ...can i use tape to seal the crack 🤔

[@dannyjohnsonsgarage]

It may work

[@nickbalassone6196]

Do you know where to get the boots that connect the smaller line to the bigger barb? My line broke at the boot and won't come out but if I had another boot I could still use the rest of the line

[@CheesusSVT]

Great tip 😎👍

[@louisax4058]

Where did you buy those little tees or barbed adapters? 1:57

[@Lethal_Venom]

Nice easy fix

[@RobertDickens2002]

I know this is an old video but do you remember what size hose you used.

[@killerkennyas]

I got a kit from Amazon that had like 5 or 6 diff sizes and adaptors,tees etc..I've used on 4 diff vehicles so far

[@killerkennyas]

Only like 25 bucks or some shit

[@Wade_the_Xterra]

So what is the other side vacuum line used for as I can't seam to trace it down

[@thereallazaviongraves]

what are those called i need them because the last person took them off to make it sound cammed

[@jtrain100179]

I got the hose and adapters. I replaced all my res lines.

[@MuppetMunch1802.]

What’s the name of the adapter

[@verinb9]

What's the size of the hose? Where can I purchase those adapters?

[@rudyramos4816]

mine broke more in the middle

[@amplifier28]

Awesome advice

[@macdezzo100]

@dannyjohnsonsgarge Hey Danny mine broke towards the back of the engine that same line but it goes into a Tee by the throttle body. One of the lines is disconnected I cant find it out where it goes? Does it go under the passenger fender to the Canister Purge Valve? Do you have another video covering the cabin air stuck on defrost I noticed mine is stuck and this vacuum hose is disconnected. I think it goes into the firewall?

[@dannyjohnsonsgarage]

I would pull down the glove box and see if any lines behind it are broken. Here is how to drop the glove box easily ua-cam.com/video/T0ikiJpZgQc/v-deo.html

[@TheNightmare692009]

Wish you could still buy this whole setup from Ford. I found the part number but it’s discontinued 😢.

[@ieatthemcookies]

What’s the part number?

[@TheNightmare692009]

@@ieatthemcookies I have to look it up in my Ford workshop manual. I gave the part number to Ford and they said its not available anymore.

[@ieatthemcookies]

@@TheNightmare692009 did you ever get it fixed?

[@TheNightmare692009]

Yes. I repaired it myself.@@ieatthemcookies

[@08_crown_vic]

My vacuum lines were melted in a fire and my vents dont work
Can i cut the melted part off and do the same thing?
08 crown vic

[@dannyjohnsonsgarage]

Yes, it should work just fine

[@anthonystokes3866]

What does the other red hose do? That’s the one that is broke on mine

[@jamesa6272]

My hoses broke just looking at them. Had to splice in hose also way before you made this video. Can’t get these hoses anywhere either. For such a popular engine you would think a aftermarket company would make a replacement setup. Also be aware that this is the vacuum line people on UA-cam tell you to disconnect to hear what your car would sound like cammed. Big mistake disconnecting these lines. They will break!!!

[@kingjay3301]

Bro i got the exact same issue😂😂😂

[@sewshygaming4470]

I did that exact fucking thing

[@acedealien8136]

Prolly no money in it