How To Fix A Gaping Neckline / Easy Technique!

Поділитися
Вставка
  • Опубліковано 4 жов 2024

КОМЕНТАРІ • 32

  • @chidinmaonubogu4628
    @chidinmaonubogu4628 8 місяців тому +3

    Thanks so much, please you do a video on how to pad and iron a bustier as well as fabric placement.

    • @mercyadamsinseams
      @mercyadamsinseams  8 місяців тому

      You’re welcome ! Check this one out
      ua-cam.com/video/Tsb4cFUHKqY/v-deo.htmlsi=lkVJRhk0oY32QsIS

  • @yetolaoluwasina5282
    @yetolaoluwasina5282 3 місяці тому

    Thank you. I encountered the same problem. 'Will try the method.

  • @Bri.an_stitches
    @Bri.an_stitches 8 місяців тому

    Enjoyed this tutorial. Thanks for sharing ❤️❤️

    • @mercyadamsinseams
      @mercyadamsinseams  8 місяців тому

      You’re welcome , and thanks for watching 😊🫶🏽

  • @monicaenyonam6199
    @monicaenyonam6199 8 місяців тому

    Lovely tutorial. I have been having issues with the fit of my sleeve, and I can't raise my hands when I wear my dresses

  • @deeray5318
    @deeray5318 3 місяці тому

    Thank you so much for this.
    Please can you do a tutorial to eliminate gaping on the armhole

  • @peacepelumi4620
    @peacepelumi4620 8 місяців тому +1

    Thank youuu

  • @omotolabadmus
    @omotolabadmus 8 місяців тому

    Please could you do a tutorial on how to cut this pattern?
    I like how it is simple

  • @valerielion
    @valerielion 2 місяці тому

    Thanks❤

  • @heavennoes
    @heavennoes 2 місяці тому

    How can we fix a gaping back neckline please?

  • @jameschukwuemekaoffor4647
    @jameschukwuemekaoffor4647 8 місяців тому +1

    Please how do i remove this gap on shoulder while using natalie bray.

    • @mercyadamsinseams
      @mercyadamsinseams  8 місяців тому

      What gap are you referring to?

    • @jameschukwuemekaoffor4647
      @jameschukwuemekaoffor4647 8 місяців тому +1

      @@mercyadamsinseams most times after making normal blouse, on addition of seam allowance to join shoulder , I do have excess at that shoulder.

    • @hauwamohammed7693
      @hauwamohammed7693 2 місяці тому

      I had the same problem too. The shoulder point was hanging and not laying flat on my shoulder.

    • @mercyadamsinseams
      @mercyadamsinseams  2 місяці тому

      This can be corrected by taking out about 1/2 or 3/4” from the outer edge of the shoulder width( that’s after marking out the neckline), then reconnect to the shoulder point to reduce the slant.

  • @ritaokougha8745
    @ritaokougha8745 8 місяців тому

    Thanks for the this❤.please after drafting and sewing my basic bodice(natalie bray )i always have gaping on my cb line,it doesn't follow the curve of my spine

    • @mercyadamsinseams
      @mercyadamsinseams  8 місяців тому

      This can be corrected by slanting the center back line with about 2cm from the Original CB

    • @ritaokougha8745
      @ritaokougha8745 8 місяців тому

      Thanks for your response 💃💃. Ma this fullness is from my neckline to about half way toward the backline

    • @vivikfashionempire3190
      @vivikfashionempire3190 8 місяців тому +3

      Whenever you do the CB tightening, do take the line all the way to the neckline. Don't stop the line at the scye line.
      Hope it helps.

    • @ritaokougha8745
      @ritaokougha8745 8 місяців тому

      ​@@vivikfashionempire3190thank you ma

    • @ritaokougha8745
      @ritaokougha8745 8 місяців тому

      ​@@vivikfashionempire3190thank you ma

  • @chizobasunday13
    @chizobasunday13 8 місяців тому

    Thanks so much mercy,

  • @PreciousNnamani-te8wj
    @PreciousNnamani-te8wj 8 місяців тому

    How can i reduce my armhole and bust circumference on my Natalie bray pattern. I noticed that the armhole for the front is too wide. How do i shape it so its fitted?

    • @mercyadamsinseams
      @mercyadamsinseams  8 місяців тому

      Here’s a tutorial that may be helpful. Also check out my pinned comments in the comment section
      ua-cam.com/video/zKtVrslFE_o/v-deo.htmlsi=tMrIrMOmtcwAju3e

  • @beautifulabigail2886
    @beautifulabigail2886 8 місяців тому

    Hello Mercy, what do you use to create bust cups? Thanks