That looks nice. Thanks for sharing. Watching your video pushed me into buying one just 15 minutes ago. I had been wanting one for a long time. Now I have one. 👍👍
Hey bro, I have a Traxxas Bigfoot #1 myself that I've already done the Velinion Brushless swap on and also installed RPM front widening A-Arms so I can run the same 4 wheels. But, I still have the stock servo, so my question is, do you think I'll have any servo problems running this tires/wheels?
Hey there, I know this video is older, but do you happen to know what all parts you used? The kit is no longer available, but I can order individual pieces, minus the 50mm x 4mm camber links & 70mm x 4mm steering links. Just curious.... Thanks for any info. 😀👍
No, haven't stripped the servo saver, did break some front plastic spindles as there is a bit more stress on them. Also, I loosened the Traxxas slipper clutch to avoid burning up the factory motor.
I'm not sure, I did the wide kit first but looking over the r/c the tires might rub the body. Checkout Proline garage's write-up: blog.prolineracing.com/2016/11/14/pro-line-project-garage-traxxas-bigfoot-stampede-goes-beast-mode-with-pro-line-pro-2-upgrades/
You definitely have to do the wide kit. That was the first thing I done before doing the Velineon Brushless upgrade. Then I add all aluminum castor blocks and hub carriers. I'm now about to aff these tires lol
@@neverenuff2381 I think they're asking if u trimmed rubber off the front and back side of each tire. From what I seen it looks to me like u trimmed it flip tire over trim other side then moved on to the next one
I did this too. I went brushless 3s with 19t pinion and 86t spur. It's a freaking blast!
Does it overheat with that gearing?
These are the kinds of tires all of Traxxas' monster trucks should come with
Thanks for the video, I just picked one up at a yard sale. Looking forward to upgrading it.
That looks nice. Thanks for sharing. Watching your video pushed me into buying one just 15 minutes ago. I had been wanting one for a long time. Now I have one. 👍👍
love to see more video of the mods u did so these can work
How to install brushless motor
I feel like the tires and wheels the Bigfoot comes with, is too small
That looks insane.🇨🇦
Where did you get these wheels and tires ? What size are they?
I didn't see any hex nuts that holds the wheels on the axle where u line the wheel up
What gear are you running? Mine gets warm
Hey bro, I have a Traxxas Bigfoot #1 myself that I've already done the Velinion Brushless swap on and also installed RPM front widening A-Arms so I can run the same 4 wheels. But, I still have the stock servo, so my question is, do you think I'll have any servo problems running this tires/wheels?
Is that a camera mount on top of the cab? Details, please.
Thanks.
They gotta have a body for Whistlin Diesels Monstermax too. It would look insane with those tires.
Hey there, I know this video is older, but do you happen to know what all parts you used? The kit is no longer available, but I can order individual pieces, minus the 50mm x 4mm camber links & 70mm x 4mm steering links. Just curious.... Thanks for any info. 😀👍
luv yo truk. its badasss
Nice!! Whats the part# for the wheels ?? They look awesome!
Not sure of the part number but they're J Concepts Tribute 2.6 x 3.6 wheels.
Hi. That thing is sweet.
Where you got the parts at tires
Question,will these hobbysoul,2.2 tires,130mm,10mm negative offset,2.2beadlock,fit the big foot.,thanks for any info on this
Yes absolutely, but no more wheelies.
Please do a full on run video
hello there did you ever strip the servo saver using this big tires ????/
No, haven't stripped the servo saver, did break some front plastic spindles as there is a bit more stress on them. Also, I loosened the Traxxas slipper clutch to avoid burning up the factory motor.
do you need to take off the bead of the tires front and rear or just the front ???
I trimmed all four tires to fit the Jconcepts tribute wheels.
Link for the tires ?.
HELLO DO CUT THE BEAD OFF THE TIRES FRONT AND BACK TO MAKE FIT ON THE RIM ???
I did trim off about an 1/8 of an inch, only takeoff a little at a time.
Cool
I found one for $175 including the charger.
Great price!
I have the Bigfoot what do I need to get rim and tires like that to fit
With bigger tires do you put the engine more under stress?
It does get hot (indoors) but I installed a heat sink with twin fans that keep it somewhat cooler. Next up is a brushless motor.
Can you put this set up on a factory set up or do you need the wide kit?
I'm not sure, I did the wide kit first but looking over the r/c the tires might rub the body. Checkout Proline garage's write-up: blog.prolineracing.com/2016/11/14/pro-line-project-garage-traxxas-bigfoot-stampede-goes-beast-mode-with-pro-line-pro-2-upgrades/
You definitely have to do the wide kit. That was the first thing I done before doing the Velineon Brushless upgrade. Then I add all aluminum castor blocks and hub carriers. I'm now about to aff these tires lol
Nvm there is a description
Lol
FRONT AND REAR ALL 4 TIRES ARE JUST THE FRONT YOU TRIM OFF THE RUBBER ???
I trimmed a bit on all 4 tires
@@neverenuff2381 I think they're asking if u trimmed rubber off the front and back side of each tire. From what I seen it looks to me like u trimmed it flip tire over trim other side then moved on to the next one
@@jackmehoff6701 yes, I trimmed each side of the tire before I glued them on the wheels. It doesn't fit right if you don't.
The size they were supposed to be 👆
Get rpm a arms
need a more powerful motor you will kill your motor with those tires