MIG Welding Settings for the YesWelder MIG 250 Pro Welder
Вставка
- Опубліковано 21 лип 2024
- MIG Welding Settings for the YesWelder MIG 250 Pro Welder - A detailed look at the MIG Welding Settings for the beginner MIG Welder. I will also demonstrate the welding results of the MIG Welding Settings that are included with the YesWelder MIG 250 Pro Welder. Save 10% on your entire order at YesWelder.com by using the Promo Code - DIYHP10% (YesWelder MIG 250 Pro product links below)
DON'T FORGET TO LIKE COMMENT AND SUBSCRIBE
/ @diyhomesteadprojectsd...
Use Promo Code DIYHP10% to save 10% off your entire order here
yeswelder.com/?ref=DIYHP10%25
MIG Welder 250A MIG Pro Aluminum Welding Machine | YesWelder
yeswelder.com/collections/wel...
YesWelder® 150AMP Spool Gun | Aluminum Welding Gun Torch
yeswelder.com/products/spool-...
Gasless Flux Core Welding Wire, .030" E71TGS Carbon Steel Spool, 10LB Spool
yeswelder.com/products/weldin...
YesWelder® Gasless Flux Core Welding Wire, Carbon Steel E71TGS.030-inch on 2-Pound Spool
yeswelder.com/products/weldin...
Auto Darkening, True View Welding Helmet | M800HP
yeswelder.com/products/auto-d...
Top videos you need to see:
Could this be the BEST ALUMINUM TIG WELDING MACHINE for the money? - YesWelder TIG 250P AC-DC Welder
• Could this be the BEST...
Yeswelder LYG M800H Welding Helmet Review - Including Actual Welding Arc Shots with the LYG M800H
• Yeswelder Welding Helm...
New Gas Bottle!!! TIG Welding 1/4 inch Aluminum - YesWelder TIG 250P AC-DC TIG Machine
• TIG Welding 1/4 inch A...
If you would like to help support my channel and use the WannaBFree Amazon affiliate link, I thank you in advance for your support. As an Amazon Associate I earn from qualifying purchases and no extra cost to you.
WannaBFree Amazon affiliate link
www.amazon.com/shop/wannabfree
Link to my other channel with lots of camper van and travel videos
ua-cam.com/users/WannaBFree?... - Навчання та стиль
Use code DIYHP10% to save 10% off your entire order
yeswelder.com/?ref=DIYHP10%25
(NEW Spool Gun Compatible) YesWelder MIG 250 PRO Aluminum Welding Machine
yeswelder.com/products/aluminum-mig-welder-mig250sg?ref=DIYHP10%25
YesWelder 150AMP Spool Gun
yeswelder.com/products/spool-gun-lbt150?ref=DIYHP10%25
Auto Darkening, True View Welding Helmet | M800HP
yeswelder.com/products/auto-darkening-welding-helmet-m800hp?ref=DIYHP10%25
Can this machine do stick welding
Yes it can Dino. It's capable of MIG TIG and STICK welding. I will eventually make a video or two using it in stick mode. Thanks for the question. 👍
@@DIYHomesteadProjectsDIYHP10 ok 👍what's is it Duty cycle
It's rated at 60% @ 225 amps in stick mode. 60% @ 250 amps for MIG and TIG mode.
Appreciate your knowledge! Getting ready to try aluminum for the first time with my Yeswelder. Thanks!
I wish you the best!
Very helpful video. Many thanks
You are welcome Shaunee, thanks for watching!
Very good presentation for mig 250 pro.
Your video is informative. I see that the setup process is relatively easy.
I would like to be sent the welder setting chart. Good effort. Continue.
Thank you, I'm glad you enjoyed it!
Lol or just take a screenshot
Request a vid showing this welder with dual shield flux core with 75/25 gas please
Love your videos. I have the Yeswelder 250 pro and I weld mild steel on 110 volts.
Thank you Bob! It's a great welder IMO and I like how it welds on either 240V or 120V input power. Happy welding to you and thanks for watching, I appreciate it!
My 250pro isn’t dual voltage or am I missing something?
Mine is also 240V only. Apparently I was thinking of a different machine when I wrote the above comment. I have only used 240V input power on the 250 Pro machine.
@@benwade7151
Use the 110 plug. Cheater plug. Welder works off of both 240 and 110. I've settled aluminum and steel.
@@DIYHomesteadProjectsDIYHP10 thanks for the hit back! I purchased the 250pro a couple of months ago and have only used it on a couple of small jobs. My only complaint is that I have trouble dialing it in. I’m running 035 flux core at the moment and it does well but I know it can do much better. Do you know where I can find a chart in inches?
I want to see you set it up for aluminum welding with the liner....
I just made a video welding aluminum with the YesWelder MIG 250P
ua-cam.com/video/oOCxNEjttLY/v-deo.html
Installing the graphene liner video
ua-cam.com/video/N45-UYHdcMY/v-deo.html
The weld settings chart doesn't go higher than material that's 0.196" thick (slightly more than 3/16"). Have you figured out the settings for thicker material such 1/4", 5/16", and 3/8"? Any recommendations?
I usually just look up mig settings using a google search or the Miller weld settings app on my phone for the material thickness I'm wanting to weld. Then I'll use those settings as a starting point and fine tune from there. A lot of the charts or setting you'll find on a google search will have the wire feed speed in inches per minute but as you know the MIG 250 PRO is shown in meters per minute. A super easy way to convert is memorize 39.37. One meter per minute equals 39.37 inches per minute. When I see a recommended wire feed setting in inches per minute I just divide that number by 39.37 and you know what to set your MIG 250 pro to for wire feed speed.
1/4" steel example using the miller mobil settings app:
.035 wire - 360 - 380 ipm (9.14 - 9.65 mm)
75/25 mix gas 21-22 volts
I'll usually start with the lower settings and work up from there. I use this method for all my settings and don't even use the chart that came with the welder anymore.
Hi, can you do a step by step installation of the Graphene liner to use
the Aluminum spool. The manual is so vague and pictures in the manual is
blurred.The few Yeswelder videos on the Liner are incomplete or not
even worth wasting time viewing it. I would appreciate it and many
others dealing with this new awesome welder! Thank you!
I'm going to have a look at that today ken ken.
@@DIYHomesteadProjectsDIYHP10 Looking forward to it! Thank you! I am stuck like chuck. I don't want to make a mistake.
Thanks for the videos on this welder. I just subscribed and hit the bell. I'm trying to decide between this and the 205DS. I'm confused why some welders, like the Titanium Unlimited 200, require a spool gun for aluminum but this one doesn't.
Thank you for your support Phillip, I appreciate it! My understanding is the biggest issues with running aluminum in a MIG is problems with feeding the soft aluminum wire to the MIG gun. You can have feeding problems with trying to feed through a long MIG torch lead. That's why a spool gun has a very short distance from the wire spool to the tip of the gun. (maybe 8 inches at the most) A MIG gun lead will be several feet long. The soft aluminum wire can easily bind up in the lead and cause feeding issues. The YesWelder MIG gun lead is 10' if I remember correctly. And they give you a teflon liner to replace the steel spring wire liner that's used for steel wire. I think the 250 pro machine can weld aluminum. I don't know how well because I've never tried it, however I don't think it's ideal. I think the best would be to use a spool gun if you were going to MIG weld aluminum all the time. Basically I think it's mostly a marketing and cost cutting thing. The 205DS will also weld aluminum if you install a spool gun. Personally I don't intend to MIG weld aluminum, I have TIG machines that will do that much better than a MIG machine. Some people want one machine that will do it all and I think the 250 pro is marketed toward that type of customer. For MIG welding steel, I think either machine (250 pro or 205DS) would be a great machine and value for the price in comparison to other machines in that price range. I really like the 250 Pro so far! Good luck with your search 😀
Yes Phillip, I've seen those two videos. He does a nice job!
30-250 amps for MIG on the 250 Pro machine. His might be 40 but he has the earlier model machine. They have changed a few things on the newer machine. Just a note, if you post links in a comment the comment won't post. It goes to a spam folder and eventually disappears. I can see the comments momentarily before they disappear but if I don't get to them shortly after they are posted I'll never see the comment.
@@DIYHomesteadProjectsDIYHP10 Thank you so much for this information. Knowing that this welder can go down to 30 amps sealed the deal for me. I used your code to save $58. I bought the regulator and the TIG torch along with the welder. Thanks again for posting this video and responding to my comments.
@@DIYHomesteadProjectsDIYHP10 Also, thank you for letting me know about posting links. I can see the links I have posted and assumed everyone can see them. But I logged out of my UA-cam account to see this page and I can not see them anymore. That is to bad because I posted them there for other people who may be interested in knowing what I have looked up about. Anyway, thanks again for all of your help. I'm looking forward to getting this welder and playing with it.
Bruce - Have you verified the Mig-250 output? I recently purchased the Mig-250 and tested the output with my DC clamp meter - 201.8 maximum amperage of output. Using synergistic mode, the output is even lower. Thinking I will return the machine. If the panel output is that far off, I'm thinking all normal settings would need customized.
I haven't verified the output of my machine. I do not have a DC clamp meter available for testing. Interesting to see what your test results were. I'm really not surprised though. I've seen many videos of these cheap Chinese machines with output power different then displayed or claimed. Personally I'm not concerned about what it actually puts out as long as it welds what I'm wanting to weld. Remember, I'm a hobby welder not a professional. I suppose that's the difference between a budget hobby machine compared to a much higher end machine that costs 4 or 5 times the price of the YesWelder. If it's not working for your needs I don't blame you for wanting to send it back.
I bought on and cannot get it to weld anything it welds way to hot I’ve turnt it all the way down and it still welds way to hot like we melting my tips to hot I feel like I wasted my money
I bought this welder to weld 1/4 steel. What size wire should I get? .023 or .030?
Personally I would use .030 or .035. I use .030 myself for all my hobby welding projects.
I finally was able to order the Yeswelder MIG-250 PRO. Do you know the Yeswelder TIG torch for the MIG-250? Thanks.
Good to hear! You're really going to like that machine I think. On the YesWelder web site it says this one will work with the MIG-205DS or the MIG-PRO250 - yeswelder.com/products/tig-welding-torch-17v35?ref=DIYHP10%25
Hi, I just find the video for this you made, it’s very cool, I come from Hynade who is plasma and cutter producer, we hope set up a long term cooperation for review of plasma and welders, Do you interesting for this project ?
Yes I am interested in the Hynade machines. Do you have an email where I could contact your company?
Will this machine tig weld aluminum
No AC TIG, only DC TIG. Some people have done DC aluminum TIG but it is not the preferred method for aluminum in most cases.