Was tasked to set this up for work training as the original configuration didn’t work (I already mounted it on the roof lol) had to take it back down both of them.
Great video, when you changed the IP on your PC, did you have to disconnect it from your router (local network)? Or you can still connect to your default gateway when setting these up? Thanks.
What should I use to use to take internet from one building that has a wifi network and everything. I want at another building to create a different network with a different router and wifi? To me it seems like the building to building bridge with a router after the bridge is what I need, correct?
Excellent video I have a question I have two older engenius that is worked for awhile however my signal is 79-83 rssi between the two buildings voice is garbled hardly any internet think signal is the issue and if so would these be a better choice I'm currently using 2 engenius ens202 s
Soo, after powering up the two devices, you plug the lan port to a computer I'm guessing? You skipped that. And then change the IP of the computer, I get that. How do you know the IP of each of the two devices? I'm not finding that info under the door or anywhere. I don't have the boxes. Thank you.
Hi Torogi Pro, which AP’s did you connect at each end to actually provide the internet at each site? Were they connected through a switch at each end? Thanks for the video,
Hi the Station PTP is the first one needs to connect from main Modem/Router, the the Access Point PTP is on the receiving end to get internet connection
You may wish to look into the AirFibre product family. Fairly long range backhaul but very $$$ you are best getting an already existing ISP and using a VPN and I would recommend this only for dedicated WISPs or if you have a very specific use case.
@@KentSapp Airmax would do 50-ish but this is definitely ISP grade backhaul project. UI recently launched LTU based Airmax product with much more advanced radio tech in it.
hi sir pls. Make a video tutorial of the actual set up and what are the devices needed to make the sender transmit wifi data to the reciever and what are the devices to connect in to the reciever to access the wifi data that is being transfered. I never seen a tutorial here like that.
Nice video po. Been a fan of your videos. Learned a lot! Btw po, I need your advice on what is your recommended devices I can use for 3km distance P2P connection. area is clear LOS as the place is an island. Your response is highly appreciated sir. Thank you in Advance!
@@eazzydoesit Hi the Station PTP is the first one needs to connect from main Modem/Router, the the Access Point PTP is on the receiving end to get internet connection
which end of the connection is StationPTP and which end is AccessPTP? Does it matter? I need to set these up between two buildings and will have security camera feeds coming from one direction and VOIP phone system coming from the other.
Hi the Station PTP is the first one needs to connect from main Modem/Router, the the Access Point PTP is on the receiving end to get internet connection
trees hold a lot of water in the leaves which can interfere with higher frequency radios like this one. If you have a lot of trees to go through, consider a solution that uses 900mhz radios instead of 2.4 or 5 Ghz
check mu to paps. www.lazada.com.ph/products/ubiquiti-nanobeam-nbe-5ac-gen2-5ghz-ac-long-range-wifi-bridge-ap-cpe-i122299117-s127272716.html?spm=a2o4l.searchlist.list.12.303b5479bcx5uv&search=1
I have 2 of these, been trying all day to access the configuration page, I've tried multiple computers, my network configuration is correct. I was able to access the config page on one of them for 2min before it stopped working again, resetting does nothing. I can ping them at their default ip, that's about it. If i figure it out i'll let you know. If you figure it out, let me know :)
Turns out one of my POE devices has water damage and corroded pins on the POE OUT Ethernet connection, the one I was using to test both (It was used). I could power them on, ping them, But it wouldn't do anything else. With the other POE they both work. Luckily the person I got them from has an extra POE.
puro kayo configuration. Pakituro nman complete set up until it is functioning,or what are the devices needed to use after configuration and connecting the two devices
You talk so fast and can't understand easily what and why we change or configure this in every step that you taught..make sure u have some explaination why this would apply and so on so that we can understand exactly the purpose of that particular name...
thanks for making this video.
welcome amigo!
great video, well edited - thumbs up!
Like Subscribe Share!
Awesome video, very helpful!
Splendid! Well explained. Thanks kapatid!
Fantastic video! Simple, to the point, and exactly what I needed! 😁😁😁
Very nice job, well covered and straightforward. Thanks!
Excellent video!!! Really helped me.
Can you please do this with Cisco packet tracer🙏🏽
Was tasked to set this up for work training as the original configuration didn’t work (I already mounted it on the roof lol) had to take it back down both of them.
Thank you !Great video quick and easy
Great tutorial! Which latency is this bridge adding between the two buildings?
Thank for this video.
Is this system still applicable in 2022?
Is there a new or better gadget?
Wifi 6?
Great video, when you changed the IP on your PC, did you have to disconnect it from your router (local network)? Or you can still connect to your default gateway when setting these up? Thanks.
Thanks for this sir, super like :)
great video brother
Great video! Very useful
Great job on this video!
What should I use to use to take internet from one building that has a wifi network and everything. I want at another building to create a different network with a different router and wifi? To me it seems like the building to building bridge with a router after the bridge is what I need, correct?
Very good video. Thanks.
Pinoy nambawan!!
Excellent video I have a question I have two older engenius that is worked for awhile however my signal is 79-83 rssi between the two buildings voice is garbled hardly any internet think signal is the issue and if so would these be a better choice I'm currently using 2 engenius ens202 s
Can you use these as a repeater? Os is the only use of them to move internet connection from point a to point b with two pucks?
Can you help me how to set up a p2p access in my house? Thanks
Soo, after powering up the two devices, you plug the lan port to a computer I'm guessing? You skipped that. And then change the IP of the computer, I get that. How do you know the IP of each of the two devices? I'm not finding that info under the door or anywhere. I don't have the boxes. Thank you.
The IP addresses that you wrote on the masking tape.. where did you find those numbers from ?
wat series u use sir ?
nanobeam m5
Hi Torogi Pro, which AP’s did you connect at each end to actually provide the internet at each site? Were they connected through a switch at each end? Thanks for the video,
Hi the Station PTP is the first one needs to connect from main Modem/Router, the the Access Point PTP is on the receiving end to get internet connection
Quick question. Is it possible to have only 1 antenna and have access to internet for your own use?
should i use this or a LiteBeam 5AC Gen2 for connecting two houses about 2 miles away where the one with internet has 1gbps
Gen2 is better amigo. Mine is a later model.
@@torogipro which gen 2 the nanobeam gen 2 or litebeam gen2?
Both will work just fine, however Nanobeam has better signal results and faster processor compared to litebeam.
@@torogipro thank you!
Great video I was wondering if the nanobeam.airmax can do ptmp with three nanobeam airman
thanks for the help! but now that I have the beams talking to each other, how do I set up the router in Building B to be able to use the internet?
same question
Same way you ran a cable to the station ptp, do same to the access point ptp to a switch or router and access from there
Sir your AP NBE was connected to ISP? Or Station NBE?
Papsie does this device needs permit from NTC?
No amigo. 5ghz frequencies and below, no need for permit
Please continue this topic. How to Building A connect to internet and Building B received internet from Building A. Thank you very much.
Thanks👍
hi! dude!have you tried this distance of 50 km or 100 km long range p2p??
You need a different product for that kind of range.
You may wish to look into the AirFibre product family. Fairly long range backhaul but very $$$ you are best getting an already existing ISP and using a VPN and I would recommend this only for dedicated WISPs or if you have a very specific use case.
@@KentSapp Airmax would do 50-ish but this is definitely ISP grade backhaul project. UI recently launched LTU based Airmax product with much more advanced radio tech in it.
hi sir pls. Make a video tutorial of the actual set up and what are the devices needed to make the sender transmit wifi data to the reciever and what are the devices to connect in to the reciever to access the wifi data that is being transfered. I never seen a tutorial here like that.
can you verify which nano ip address is the building access point and which building is the station?
Hello good day. Can i ask whats the difference of this device to gen2 ac?
Nice video po. Been a fan of your videos. Learned a lot! Btw po, I need your advice on what is your recommended devices I can use for 3km distance P2P connection. area is clear LOS as the place is an island.
Your response is highly appreciated sir. Thank you in Advance!
Question. Does the one that is the access point goes on building A or building B, and why?
I was wondering the same.
@@eazzydoesit Hi the Station PTP is the first one needs to connect from main Modem/Router, the the Access Point PTP is on the receiving end to get internet connection
Pwede po siya iset as AP?
Sir why you put SSID on your station NBE? For what thanks.
which end of the connection is StationPTP and which end is AccessPTP? Does it matter? I need to set these up between two buildings and will have security camera feeds coming from one direction and VOIP phone system coming from the other.
Hi the Station PTP is the first one needs to connect from main Modem/Router, the the Access Point PTP is on the receiving end to get internet connection
Nice video torogi pro,,, just want to ask can anybody connect to it? Or it realy need a reciever?
You need to have that receiver bruh
@@torogipro thanks idol proud torogi here also,,,
Can it be 1 transmitter and many receivers
Hi paps. Have you tried long distance like 15kms??
Yes amigo
@@torogipro What speeds do you think I can get at around 3.5 miles?
@@torogipro so ? what is the result?
can you create overview tut about Ubiquiti AirFiber 24 HD
pl
Doing everything in here connected with 140mb going in my master but only 20 coming out the slave does anyone have any thoughts thanks
Can a nanobeam be set to multi point?
Hello can it go through trees?
Yes amigo.
trees hold a lot of water in the leaves which can interfere with higher frequency radios like this one. If you have a lot of trees to go through, consider a solution that uses 900mhz radios instead of 2.4 or 5 Ghz
Ive like to transmit my internet at 5 kilometer which one is the best product? M5 lite beam? Or nano beam?
Nano is better, but m5 csn do the job aswell
Nano is better, but m5 can do the job aswell
Where to buy equipments???
sir ok po ba ang lap 120 gamitin as AP and station?
about 8 kilometer ang distance
Kaya basta, line of sight lang boss
thanks for the tutorial but please make more slow the next one.
what about signal setup ?
How do I know what up address I need to name them?
How much for the two NanoBeam?
Around 110 dollars to 120 dollars, this varies depending on your location.
@@torogipro110-120 that is for two Nano's? Meaning half for a one nano?
@@kevinvalladolid2388 per NBE
@@kevinvalladolid2388 each nano friend is around 110 -120. Apologies for the confusion.
Magkano po yan ? plan q kasi sa bahay nmin sa province tpos sa bukid itututok mga 4Km distance
check mu to paps. www.lazada.com.ph/products/ubiquiti-nanobeam-nbe-5ac-gen2-5ghz-ac-long-range-wifi-bridge-ap-cpe-i122299117-s127272716.html?spm=a2o4l.searchlist.list.12.303b5479bcx5uv&search=1
How to remove deafault SSSID wifi NBE-5AC-GEN2: always ON
Gd pm sir, puede ba mlaman kung mgkano ang price, ng nano beam ubequiti,. Thanks sir,. God bless..
Sika t idol ko
what should i do if i cant access the login with ip address i keep typing into browser bar but can not get to the login page
I have 2 of these, been trying all day to access the configuration page, I've tried multiple computers, my network configuration is correct. I was able to access the config page on one of them for 2min before it stopped working again, resetting does nothing. I can ping them at their default ip, that's about it. If i figure it out i'll let you know. If you figure it out, let me know :)
Turns out one of my POE devices has water damage and corroded pins on the POE OUT Ethernet connection, the one I was using to test both (It was used). I could power them on, ping them, But it wouldn't do anything else. With the other POE they both work. Luckily the person I got them from has an extra POE.
where did you get the preshared key from?
That would be the main Modem/Router
mRaming slmt boss tga baguio k rn b?
Yes amigo
config mo una yong station? with that, not locking the station to the AP then it can be connected to other AP and have your data stolen... oh well...
San po kaya nakakabili nito? at magkapano po? salamat sa sagot
Lazada paps
Jarred Plain
Jordi Vista
Hi sir Torogi. Can I send you a PM if you have socmeds account?. I just have a few questions about this setup. :)
Mine is so sloooow
Compilt sting
bisaya ni?
puro kayo configuration. Pakituro nman complete set up until it is functioning,or what are the devices needed to use after configuration and connecting the two devices
Seriously dude
Just make 6 min
You talk so fast and can't understand easily what and why we change or configure this in every step that you taught..make sure u have some explaination why this would apply and so on so that we can understand exactly the purpose of that particular name...
You can slow down the video. U welcome.😊
Konopelski Villages
Useless