I would be the same i have sounds in both my cars and about to get a 3rd one i have subwoofers in my cars and inside my house oh yeah i installed sounds in my whole family car's but my dad he hates it but my mom bro she wanted them louder lol i was like no that's good enough for u i had installed 2 10inch kickers in her Mercedes suv and they wasn't the weak ones like the yellow or white strips one they was the old school silver so they punch alote more
Yo you should use the spare wheel storage as a subwoofer box. Plenty of space and it doesn't interfere much with the trunk. Car Audio Fabrication has video on it you should check out.
You should make some cuts on the trunk cover to ventilate a little more air. Just some small slots possibly around the compressor. I am worrier and want to avoid heating anything up lol great work!!
Hey Robbie! If you are to buy a new subwoofer enclosure, make sure it has the recommended volume for your exact sub-element. Might not sound too good if the enclosure is too big or small for the sub to play properly :)
If you went for the Accuair Endo CVT you won’t be worrying about that well a little bit cause the Endo CVT the compressor is inside the tank and it’s the quietest system in the market for air suspension right now. Check out Tj hunt on his setup on his BRZ, RX7, and his MKV Supra.
🚙🔥🚙Robbie congrats on 200 k subs!! You deserve it!! I started when you were at 11 k ! It’s been fun to watch the growth of the channel!! Keep up the incredible!! I look forward to the future of the channel!! Sky is the limit!!🚙🚙🚙🔥🔥🔥
It would be cool to have an acrylic window down to where the sub and everything is, if you painted it then it would look awesome and you would be able to see all that hard work
i really love the oem look of the trunk. Picking up a smaller sub box that could fit in the corner would make it super clean. Keep it up! #CommitedCrew
I hope I'm wrong for your sake.. but you will eventually have a condensation problem in that air tank. The original water nozzle is at the bottom and you mounted the tank upside down. And the water line out the side won't allow the water to drain until the condensation fills up half the tank (which would be very bad). You need another nozzle facing down at the lowest point of the tank so it can drain properly.
Oh true, haven't been following you much recently got a little stale but I'll definitely be watching from now! Bit of an oddball choice Robbie, keen to see how it goes!
I would LOVE to see you working on this car. That would be really nice for your European fans. There are not many youtubers (from America especially) that work on old European cars, or if they do, it's usually BMW's. So it will be something different and I'm really hoping that you will film working on this car. Coming from happy owner of 2 opels and 1 bmw :D
Normal vids so we have more too watch through out the week love the videos the more the better and it's more better for u to build your channel up more 👍👍👍
Make a custom enclosure for the sub. I currently have 2 10's in the BRZ in fiberglass custom enclosure that fit in the corners and gives me back my space.
I think it would be awesome if you got an old project car like the opel. Something that needs lots of work. An old 280zx or an old opel, just something old and classic
08:30 - Why don't you just install like a little fan for it that will come on whenever the compressor is on, then you don't have to worry. Unless I have it all wrong and the compressor can handle the heat, in which case, awesome. :)
Yo! You should also do a line with like a tire valve, just incase your compressor dies you can fill it up at a gas station or wherever
gradof6b Underrated comment. He should see this
Get him to see this might come in handy
Very smart, hope he sees this
that's what the top hose is! the one I said should be on the bottom!
Robbie Ferreira sweet, must of missed it.
Robbie pointing at his sub and saying "you cant take this away from me " is a whole mood😂
I would be the same i have sounds in both my cars and about to get a 3rd one i have subwoofers in my cars and inside my house oh yeah i installed sounds in my whole family car's but my dad he hates it but my mom bro she wanted them louder lol i was like no that's good enough for u i had installed 2 10inch kickers in her Mercedes suv and they wasn't the weak ones like the yellow or white strips one they was the old school silver so they punch alote more
That Opel looks awesome, you should definitely get a European car, something like an e39 wagon, would make for the perfect daily driver
Definitely
100% that should be the next build
Loren Hensch the s10 before that though
Yessssssssssss. I would be soooo jealous. It would be amazing
Yes ,the opel manta looks so good ,and the idea with the e39 wagon is Very good like , These things are giantig and beautiful
Loving the BRZ build, glad to see how far you've come Robbie
Lewis Man hella far bro💯
"The cleanest trunk setup!"
* inside of trunk is still blue *
No hate Robbie still love ya (no homo)
Nux lol exactly, one guy tells the truth in the comments. Everyone else still nutswinging
Every car he’s got has off color door jams lol, I keep hoping he will paint the jams black, black goes with everything
@@nankuronisa2854 that's true, black does go with everything
Definitely several videos of the Opel.
I still like that even how serious he's taking the build, he still has the hot dog dash.
You should find or make a carbon fiber or a see through/ clear, trunk I think that would be cool
I thought of the coolest idea
WheelWoofers
Subwoofers that are shaped to fun in your spare wheel spot
Nissan 370z Subwoofer
Hell yaaaaaaaaaaaaa I would love to see the Opel and the S10 of course.
Regular uploads on the Opel! Dude if building a loft was a video, I don’t see why something classic can’t be
I love the brz but the Genesis will always have my heart😂❤️Can’t wait time see the new stuff for the Genesis
Hey Robbie, I sent a dm with some pictures of a car I built like your brz in a game.Great content as always stay committed 👍🤘
Yes! a new vid to get me through my class
How do you have only 200k subs?? You do amazing content, you deserve more!
Hello notification squad! Missed being here on time
Blessed by your upload schedule always watch you on my lunch break 😋
Hey Robbie I love the videos keep up the good work #staycommitted
Nice work Robbie. The clean OEM look is sick. Awesome how everything fit underneath.
Rob!!! Instead of wood, maybe a very thin piece of back splash granite or marble to lay on top of the OEM trunk liner. Just a thought?
Robbie honestly it's all up to you and how much content you can produce from it
That trunk is sooo clean now!
WE NEED A V8 on the CHANNEL!!!
We have a V8? The dime
@@callumb5184 i honestly wouldnt count that, its never gonna get finished
@@basshead9872 He was talking about almost having all the stuff in one of the previous vids. he said he i going to start working on it soon.
Crisp Garage oh you know now that you say that I remember, if he goes through with it it’ll be a cool build
Callum b yeah I know but I’ve been waiting to watch him crack a ring-land and get the thing sleeved and run some stuff at SEMA and at the strip
Yo you should use the spare wheel storage as a subwoofer box. Plenty of space and it doesn't interfere much with the trunk. Car Audio Fabrication has video on it you should check out.
Should take a look at the air lift flo tank. You can still have it up and the drainage facing down. Clean setup
I love your stuff bro keep it up
You should make some cuts on the trunk cover to ventilate a little more air. Just some small slots possibly around the compressor. I am worrier and want to avoid heating anything up lol great work!!
You guys inspire me to work on my own cars. I hope to swap a subi engine in my forester 😬
Ethan Mudgett your forester already has a subi engine my friend
Still drooling at the thought of the S10 working!!
The OEM look is where it's at!!
Hey Robbie! If you are to buy a new subwoofer enclosure, make sure it has the recommended volume for your exact sub-element.
Might not sound too good if the enclosure is too big or small for the sub to play properly :)
If you went for the Accuair Endo CVT you won’t be worrying about that well a little bit cause the Endo CVT the compressor is inside the tank and it’s the quietest system in the market for air suspension right now. Check out Tj hunt on his setup on his BRZ, RX7, and his MKV Supra.
Hey Robbie, the valve that you keep calling a pressure relief it's a water drain it goes in the bottom of the tank.
See through window in the trunk for your wires and stuff with led strips that light up.
Love it. So clean
Loving the uploads lately
🚙🔥🚙Robbie congrats on 200 k subs!! You deserve it!! I started when you were at 11 k ! It’s been fun to watch the growth of the channel!! Keep up the incredible!! I look forward to the future of the channel!! Sky is the limit!!🚙🚙🚙🔥🔥🔥
Looks clean and simple. Can’t wait for my bags to come in next week!
Imo you should have a hose long connected to the pressure release valve because it will shoot out air (obviously) water and some ice
multiple vids through the week!!
That would be some amazing content if u worked on the Opel plz do it
Ngl Robbie, your videos really remind me of the start of TJ hunt; you're going places buddy :)
It would be cool to have an acrylic window down to where the sub and everything is, if you painted it then it would look awesome and you would be able to see all that hard work
I agree with Emerson actually. I like the super clean oem trunk.
You should do a early 2000s style neon fiberglass trunk.
You should make a custom box for the sub that you can put it on the side of the trunk so it can make some space
I like this look a lot more than I thought
I love you switching up the vehicles so lets see lots of vids of the car
I'd prefer to see the whole rebuild in 1 long video cause long videos are the best
i really love the oem look of the trunk. Picking up a smaller sub box that could fit in the corner would make it super clean. Keep it up! #CommitedCrew
You should do marble that would look really fire
You should put the og committed crew sticker in the middle of the tank
Do like a hybrid type of trunk? Maybe mix the both wood and oem?
Was skeptical, but I love it
OEM looks better in this after seeing it tbh
Super clean 🔥
That air valve thing is a safety device where if the pressure gets too high it opens up and releases pressure insted of the tank possably blowing up.
love you man keep doin what your doin
We are here for you and the cars doesn't matter the make and model we just want to see you build some cool shit.
I hope I'm wrong for your sake.. but you will eventually have a condensation problem in that air tank. The original water nozzle is at the bottom and you mounted the tank upside down. And the water line out the side won't allow the water to drain until the condensation fills up half the tank (which would be very bad). You need another nozzle facing down at the lowest point of the tank so it can drain properly.
🤗 love your vids bro😘
OH that Opal car loooks so cool!! I think all in 1 video would be best :>
I think if you did a piece of plexiglass over all that and do the best wire tuck and that would be unique and kinda oem
Opels are awesome! Let's see the Germanity!
Hey Robbie 👋 I love your channel man! Continue the great work. You're the best!!! 💯💯
When are you gonna start a drift project robbie, been watching since 10k subs and still waiting haha
Take the dive youll love it!
Thats what the Genesis is!
Oh true, haven't been following you much recently got a little stale but I'll definitely be watching from now! Bit of an oddball choice Robbie, keen to see how it goes!
For the opel do what is easiest but one full length of the work video would be my preference
Hell yea bro do it
Shoulda done brushed checker plate mate. Bit of 2.5mm. Cut to fit. Will look mint
Plexi trunk would look killer!
I also so hope all jams and the underside of the trunk gets wrapped. Looks weird with two colors
I would LOVE to see you working on this car. That would be really nice for your European fans. There are not many youtubers (from America especially) that work on old European cars, or if they do, it's usually BMW's. So it will be something different and I'm really hoping that you will film working on this car. Coming from happy owner of 2 opels and 1 bmw :D
I'm mad about the fittings too. I installed bags on my frs last week and didn't come with enough
would like to see the whole in process in parts because it’ll be something to look forward to everyday
Full length video and members should get a a full time live of the car build
Ngl I voted for wood trunk but OEM looks siiiicccckkkkkk
bloopers are back :D
Normal vids so we have more too watch through out the week love the videos the more the better and it's more better for u to build your channel up more 👍👍👍
Robbie you should sell committed crew banners like the one you have on the back wall of the shop
Normal uploads, dont have 30 minutes to watch one video, i love the anticipation of whats coming tomorrow
For the purge valve thing you should tie a string on it and make it visible in case of an emergency you can at least find it faster or someone else!
yes one video of the build
if not both
you should do multiple videos for the opel
Make a custom enclosure for the sub. I currently have 2 10's in the BRZ in fiberglass custom enclosure that fit in the corners and gives me back my space.
I think it would be awesome if you got an old project car like the opel. Something that needs lots of work. An old 280zx or an old opel, just something old and classic
Long videos are the best
The inside of the BRZ needs a wrap :p Trunklid. Black maybe, or the same red as the chassie, maybe? :) Long time follower
Instead of carpet, out some hotdogs in the trunk too 😂
id like to see a full video of the week, keep up the dope content :)
Congrats on 200k!
Sound treat the trunk, you could improve the sub sound that way and further reduce the pump nosie
08:30 - Why don't you just install like a little fan for it that will come on whenever the compressor is on, then you don't have to worry. Unless I have it all wrong and the compressor can handle the heat, in which case, awesome. :)
Please paint the BRZ like Throtl did their STI, it looks great and might look great on the BRZ!
I think itd we sweet if you built a custom sub box that fits into the trunk perfectly
Did you make a video on how you mounted the air tank in your trunk?
In the wayyyy future you should try 2stepping and anti lagging the civic
Do something transparent, like fiberglass under the trunk floor instead of the 2x4. Still hidden, can be flashy
Yes please can we see the Opel I love those cars
Congrats on 200k subs
I've never related to anything more when he said "once you have a sub you can't drive without it" because it's so true...
the purge is designed to let water out of the tank so it doesn’t rust but it’s also pointless if the spot for it is pointing up
I think you should try to completely fill the wall under the loft with fan art