This wheel is for a track bike, you can make it a 2 speed by putting a sprocket on both sides and shift by turning the wheel around if you have a snap-out link on the chain.
@@user-yz5go5fu7g Of course they could be replaced...just buy new ones! I was horrified that for this so-called restoration you didn't properly clean any of the components before reassembly - just a quick wipe clean with a rag
If you want to convert a road cycle hubbody for a track, it's possible with surfacers and fixed cogs. Or maybe you could make a hubbody for your track. I think it's good to find a single cog interval of 42mm.
Yeah, I'm not recycling spoks.^^ I measured the length later and stored it in a bundle. You have a good eye. I can't believe you checked that. That's cool.
@@user-yz5go5fu7g Sorry, not picking, I know that sorting is time consuming. I like showing how to build wheels to anyone who wants to learn. I rebuild classic frames with classic hubs, but aluminum rims (for weight and stopping power). I find the riding public are more attracted to aluminum rims. I have measured, sorted, bundled and marked many thousands of spokes. A pile of spokes gives me nightmares. :) You did a great job on the hub. I think I will try to polish like you did, but on a power drill.
@@bob-ny6kn Thank you. When someone disassembles the wheel they were working on, there are times when the conventional assembled length is slightly different. It is difficult to measure and organize. It may not be a problem that the length is a little different, but it is too hard when truing. TT
La mejor masa del mundo.
This wheel is for a track bike, you can make it a 2 speed by putting a sprocket on both sides and shift by turning the wheel around if you have a snap-out link on the chain.
...una maravilla maestro.!👏👏👏👍
Very satisfying
Kiero unas masas Campagnolo cómo estás donde los consigo y cuánto cuestan ?
세상 태어나서 처음보는데 깔끔하고 깨끗해졌네요...재주가 남다르시네요...부러워요...대박나세요...
감사합니다~ 편집이 초보인데 댓글까지 ㅡㅜ 너무 감사드립니다>
Am surprised you didn't just replace the ball bearings.
The original ball bearings were in good condition and could not be replaced. Thank you for your reply.
@@user-yz5go5fu7g Of course they could be replaced...just buy new ones! I was horrified that for this so-called restoration you didn't properly clean any of the components before reassembly - just a quick wipe clean with a rag
NON si mette il grasso mei mozzi da pista ! Si montano a olio ‼️
What machine is that that holds the hub and spins it?
Woodworking lathe.
I have a shamal 9 speed rear wheel and I would like to transform it into a track wheel. An idea? thank you
If you want to convert a road cycle hubbody for a track, it's possible with surfacers and fixed cogs. Or maybe you could make a hubbody for your track. I think it's good to find a single cog interval of 42mm.
Go all-in with this road-to-track welding project... ua-cam.com/video/sWYYElx4HZ4/v-deo.html
@@user-yz5go5fu7g hi 2 years after finish bike ua-cam.com/users/shorts5zAZVvGE4T0
@@user-yz5go5fu7g I changed the crankset for campagnolo pista with a 52t rotor chainring rear sprocket 13
Eek! You mixed drive side and non-drive side spokes.
Yeah, I'm not recycling spoks.^^ I measured the length later and stored it in a bundle. You have a good eye. I can't believe you checked that. That's cool.
@@user-yz5go5fu7g Sorry, not picking, I know that sorting is time consuming. I like showing how to build wheels to anyone who wants to learn. I rebuild classic frames with classic hubs, but aluminum rims (for weight and stopping power). I find the riding public are more attracted to aluminum rims. I have measured, sorted, bundled and marked many thousands of spokes. A pile of spokes gives me nightmares. :) You did a great job on the hub. I think I will try to polish like you did, but on a power drill.
@@bob-ny6kn Thank you. When someone disassembles the wheel they were working on, there are times when the conventional assembled length is slightly different. It is difficult to measure and organize. It may not be a problem that the length is a little different, but it is too hard when truing. TT
Isnt this a track hub? All spokes arent the same size? Why not put them all back in the same exact holes, haha!
Poco brillp, yo lo hago a mano queda un espejo.
Andres M que utilizas para darle brillo como un espejo o como lo haces?
Annoying music, half the action was off camera.