Arduino Course LEVEL 2 (Spanish): bit.ly/2ZNWgqy Follow me on FACEBOOK for more: facebook.com/Electronoobs Help me on Patreon: www.patreon.com/ELECTRONOOBS
@@lio1234234 I2c is just another serial port with a specific com protocol. It can be used to communicate with anything that speaks its language. The nice thing about it is, it only require 2 pins and can be used in a multi-drop configuration so it's easy to create small (Master/Slave) networks. Down side is, it's designed to be used physically close to the other players on its network. You can hang a bunch of I2c sensors on the same two lines.
I looked into those Pokit meters. But i eventually got myself one of those newer meters that have a built in screen. So nice not having to find my phone to use a meter.:)
As always, another great video! One of my projects for 2022 is to make a companion robot for my kids. A Robot to tell the time, jokes, so on so on... If you do one, for sure I will follow all your videos to build it! Please, do it! :) For now, I already bought the module, it's really powerful! Thanks for sharing!!! Have a great year!
You are the best human on earth You provide these projects for free to us electronics enthusiasts. Nice to meet you You are my best friend. I wish you success and health My best friend
You can do voice recognition on a $15 raspi pi zero and have a much larger set of commands and NLP routines as well text to speech. Though this module is super simple to setup and integrate if thats all you need
offline voice recognition? Without sending any data to Alexa or Apple or whatever? Can you please give some info where to find such a solution! Thank you! I would be really glad!
This looks awesome man! Way to go! Can you make a video explaining the parts you used and how you made the library? I’d love to see your design process
Very interesting & easy to follow guide to this board ... Think I'll add one to my next order ... Quick question...if you don't mind ? You say it can accept 254 voice commands but the specification on the listing says 80 - which is it please ?
Guess you could run several in parallel all receiving the same audio, expanding any given moment by multiples of 7 commands. A robot that had a directives list for example will probably have the need for more than 7 commands at any given moment, having all N commands at ready would need multiple modules all listening. Whichever one gets a pattern match first would then send the data over UART. Now you just need a way to funnel all the UARTs into a single command processor.
@@SmallSpoonBrigade Ideally you're right. I don't know of an embedded version that is capable of more. The next step would be something like a Raspberry PI running software I suppose...
@@adespade119 Ideally this will just evolve into more complete system. A voice module that either supports expansion, or the software equivalent of FPGA that can compile and run on something like an ESP32. Thanks for commenting!
Awesome tutorial on how to use the voice commands. Your channel has helped me alot in building somethings with the arduino. I have a couple of builds loaded on my channel.
THANK YOU so much for this very comprehensive video!! I build large scale custom rc cars, I did a taking Skyline R34 with turbo sounds and at this moment I’m building a Bugatti Bolide. However I want to do an even better Job on this Bugatti Build and your video is helping me achieve that! So thank you.
Your UA-cam channel helps people who are just learning voice recognition, I want to ask a question about how voice recognition can control dfplayer mini, one command to play one song, please give the answer
These kind of videos are Eletronoobs's Monopoly. I hope Electronoobs knows this. Atleast me as a viewer or a tinker loves Electronoobs for these kind of videos. I really appreciate your efforts. Please keep making us amazed with your lovely videos. And noobix is so beautiful name 😍😍😍
love the POKIT..... do you ship to Serbia? Oh, and one more thing, would like to see a dedicated tutorial about using the POKIT... BTW just curious, are you part of the crowdfunding 'pokit' project ?
Looking at the specs, it would be great if it worked with 3.3V instead of 5 - would be usable with ESP8266 - connecting ESP to MQTT and you have wireless voice assistant in any room :)
@@AllTernative90 5V power is not the problem - the signal levels on the serial interface are a bit of an issue. ESP (both 32 and 8266) is not 5V tolerant on the input pins, so providing it with 5V TX signal might fry the chip. There is level shifter option, of course, but I am 99% sure the chip on the board also works with lower voltage than 5V. I'll check it as soon as it arrives - already ordered :)
@@AllTernative90 So, the module arrived. Tested it with ESP and it has a problem. It does work with 3.3V, but it was getting resets as the lib is written for arduino and uses while loops without yielding back the control to ESP, therefore causing WDT resets. I was able to fix it by inserting yield(); command at line 106 and 200 of the VoiceRecognitionV3.cpp file. Since then - no problem at all, works like a charm. I've tested using SoftwareSerial connected to D6 and D7 of my wemos module (IO12 and IO13 on ESP). Works OK, training it now :) I'll have to write a code for it to send MQTT commands, but this will be perfect - I can put it to multiple rooms. My start command, btw, is "Hey, Jarvis" :)
@@rklauco Thanks for getting back to me and giving all the details! Could you do me a favor and test if it can also recognize sounds like a doorbell? Or does it just work with more vocal sounds? Thanks again!
I have questions: Can you change the text to speech voice to a different one? Can you plug it into a portable power module? does It need to be plugged into a computer for it to work?
There’s a Movi speech recognizer and speech synthesizer board that technically also do the command. Either by closing a circuit or pwm. Not sure yet, I have not gotten deep into it yet but some of the Amazon reviews I saw were quite advanced and capable.. “the R2D2 video” but that board will be plenty to meet my needs in a 1/7 scale RC car application. Lights, fans, blow flames, start engine or engine sounds, music, and just conversation. What I’d really like is if u can also have it read out live Lipo voltages and motor temps and ESC temps. Would I be asking to much for gps/mph and G force lol?? Anyhow if you have content or experience with that board, I’m definitely going to be looking for it as I look at most of your videos!
GUYS, quick note here. I actually tried this on mega because I have a project using the voice recognition module in arduino mega. You guys need to connect pin 10 to tx and pin 11 to rx not the other way around. Ps: But if it works for you then I guess it's fine. Just that mine doesn't work when my tx is 11 and rx is 10
Hi; excellent video, thank you so much for sharing to. I'd like to control a tool with my voice, however I wouldn't like to do a full Arduinno course. Is it possible to complete this project without having Arduino knowledge?
This is a nice project. Can this be used to recognize music? Say I sing a song correctly, an LED should come on, if I sing it wrongly, nothing should work, maybe a red LED.
Can't equal alexa! Any noise in the background causes failure. (motor running sound on robot, TV set, other people in room making noise) Also, over time your voice changes so you have to re-train it again. Sensitive to volume level. (you must be close to microphone or many fails.) Won't work for different people. Some words can't be trained successfully. (these are problems I ran into)
Hello sir I want your help in one of my project. Can you pls guide how I can detect sound in the electrical panels ziiiii like chirping sound in the electrical system.
Thx a lot for this great video!! When I'm searching for the module, or clicking on the Ali-Link you provided, the actual V3 only shows 80 possible commands. Do you know, if there is still a 254command version available, somewhere? thx and greetings!
Hi... great video. How would i use the voice command module to hear a keyphrase or word and reply with a prerecorded wave file thru an onboard speaker?
This looks good, but I suspect people will compare with natural language processing systems. Does this require that you don’t slur words together? Must the user know that commands should be fully separated with a tiny amount of space? It seems a shame that they cannot include double the amount of storage / analysis buffer ie 3000ms. Interesting video though.
It's only recognising the tones of your voice, so it'll work with any language, even completely made up words, but it will have a trouble trying to understand two people with different accents
can we record a request like if i want to do a chat gpt robot i will say the wake word and after that i want the module to record what i say after and then when i say im finished the arduino send this voice to a speech to text api and then removes the record from the module
Hello, I have a question, do you use Voice Recognition Module - 254 Voice Commands + UART with raspberry, I have migrated some projects from Arduino to Raspberry, Will be this case?, i am interested too, add commands to smart car or others apps
You probably get hundrets of questions like this. I have a channel with Arduino contant. I am monetised but it is not growing as I would like. Not saying that I am loosing my faith but I would lie to know what avarage watch durations you get on your videos. My tutorials get 25% to 40% and I do not know if it is decent result on the technical channel like this.
Hey thanks so much for sharing. I followed the steps and when i tpyed " train 0 " and entered, "speak now" didn't show up and instead it said " train time out" what should I do to fix? I have no idea what to do now
Iam having the same issue. Not just for train, for every command it's saying timeout, the only functioning command is 'help'. Did you fix it? If did, please share how to fix it.
It can only store up to 80 voice commands, not 254. You can cleary see that in the aliexpress product page, and also the parameter for the"record" command, is a number between 0 and 79, giving the total 80 voice commands. Please, update the video title, it's giving misinformation.
The version he is using is v3.1 while the link he provided is to buy the v3.0. I found the 3.1 on ebay but I would l to know if there is another way to buy it, maybe cheaper.
would it be possible to add the code that was used in the video to your website? It would be great to have it and change variables on it so it can control what suits my application. rather than writing everything again. especially since in new to arduino writing arduino code. thank you
if anyone have a timeout error do this Click ctrl F and search timeout it will pop up then go 7 lines up u will find this line "if(ret >= 0)" change the 0 to -0 that's all the base code is wrong hope that works if u are wondering im just 14 years old i am not an expert
Arduino Course LEVEL 2 (Spanish): bit.ly/2ZNWgqy
Follow me on FACEBOOK for more: facebook.com/Electronoobs
Help me on Patreon: www.patreon.com/ELECTRONOOBS
I think the i2c would be for use with something like a raspberry pi
@@lio1234234 I2c is just another serial port with a specific com protocol. It can be used to communicate with anything that speaks its language. The nice thing about it is, it only require 2 pins and can be used in a multi-drop configuration so it's easy to create small (Master/Slave) networks. Down side is, it's designed to be used physically close to the other players on its network. You can hang a bunch of I2c sensors on the same two lines.
Any chance you can publish your code on some git repo? I'd have some minor tweaks to enable also ESP8266 support...
could you help us telling us what your turn_off_all function does?
The code I need it
I looked into those Pokit meters. But i eventually got myself one of those newer meters that have a built in screen. So nice not having to find my phone to use a meter.:)
I like that you show a prototype of the robot -- just a string of LEDs to confirm that each of the robot commands is being recognized.
As always, another great video!
One of my projects for 2022 is to make a companion robot for my kids. A Robot to tell the time, jokes, so on so on... If you do one, for sure I will follow all your videos to build it! Please, do it! :)
For now, I already bought the module, it's really powerful!
Thanks for sharing!!!
Have a great year!
How's your project going?
You are the best human on earth
You provide these projects for free to us electronics enthusiasts. Nice to meet you
You are my best friend.
I wish you success and health
My best friend
Very nice little device. It has given me some home automation ideas, thank you for showing us how it works. Cheers for the new year
This is BRILLIANT, thanks so much for sharing! Looks like this will assist with a couple of my projects as well.
I love your videos, and to be honest , for me, your accent and way of speaking English keeps me hooked til the end ! Keep em coming.
Amazing little tool, this removes the need for a powerful processing device to achieve voice recognition
Its at least ARM64 cpu with NPU or DSP. Also high performance.
You can do voice recognition on a $15 raspi pi zero and have a much larger set of commands and NLP routines as well text to speech. Though this module is super simple to setup and integrate if thats all you need
Please share it...
or give a link..thanks
offline voice recognition? Without sending any data to Alexa or Apple or whatever?
Can you please give some info where to find such a solution! Thank you! I would be really glad!
This looks awesome man! Way to go! Can you make a video explaining the parts you used and how you made the library? I’d love to see your design process
Thanks for these awesome videos brother! Just found your channel a few days ago and have been watching lots of your videos!
Very interesting & easy to follow guide to this board ...
Think I'll add one to my next order ...
Quick question...if you don't mind ?
You say it can accept 254 voice commands but the specification on the listing says 80 - which is it please ?
Guess you could run several in parallel all receiving the same audio, expanding any given moment by multiples of 7 commands. A robot that had a directives list for example will probably have the need for more than 7 commands at any given moment, having all N commands at ready would need multiple modules all listening. Whichever one gets a pattern match first would then send the data over UART. Now you just need a way to funnel all the UARTs into a single command processor.
Possibly, but if you need more than 7, you probably want a more powerful system.
@@SmallSpoonBrigade Ideally you're right. I don't know of an embedded version that is capable of more. The next step would be something like a Raspberry PI running software I suppose...
running on i2c that might be possible, since each module would be listening for its own 7 commands.
Pretty good idea
@@adespade119 Ideally this will just evolve into more complete system. A voice module that either supports expansion, or the software equivalent of FPGA that can compile and run on something like an ESP32. Thanks for commenting!
255 command! There are so many possible combination with 255. Really cool.
Awesome tutorial on how to use the voice commands. Your channel has helped me alot in building somethings with the arduino. I have a couple of builds loaded on my channel.
THANK YOU so much for this very comprehensive video!! I build large scale custom rc cars, I did a taking Skyline R34 with turbo sounds and at this moment I’m building a Bugatti Bolide. However I want to do an even better Job on this Bugatti Build and your video is helping me achieve that! So thank you.
SUBBED🔥
Hi, great video. We all want to know what the range of the microphone is!
Great video.
What were you thinking with the hand tattoos?
Your UA-cam channel helps people who are just learning voice recognition, I want to ask a question about how voice recognition can control dfplayer mini, one command to play one song, please give the answer
Hey noobix, like this video!😀
Like always, U did a good Job , but now better as before
These kind of videos are Eletronoobs's Monopoly. I hope Electronoobs knows this. Atleast me as a viewer or a tinker loves Electronoobs for these kind of videos. I really appreciate your efforts. Please keep making us amazed with your lovely videos.
And noobix is so beautiful name 😍😍😍
love the POKIT..... do you ship to Serbia?
Oh, and one more thing, would like to see a dedicated tutorial about using the POKIT...
BTW just curious, are you part of the crowdfunding 'pokit' project ?
Looking at the specs, it would be great if it worked with 3.3V instead of 5 - would be usable with ESP8266 - connecting ESP to MQTT and you have wireless voice assistant in any room :)
I was thinking the same. But an Esp32 should have 5v, right? That would work I guess.
@@AllTernative90 5V power is not the problem - the signal levels on the serial interface are a bit of an issue. ESP (both 32 and 8266) is not 5V tolerant on the input pins, so providing it with 5V TX signal might fry the chip. There is level shifter option, of course, but I am 99% sure the chip on the board also works with lower voltage than 5V. I'll check it as soon as it arrives - already ordered :)
@@rklauco Ah I see. I'd appreciate it if you could keep me up to date, once you tried it out. :)
@@AllTernative90 So, the module arrived. Tested it with ESP and it has a problem. It does work with 3.3V, but it was getting resets as the lib is written for arduino and uses while loops without yielding back the control to ESP, therefore causing WDT resets.
I was able to fix it by inserting yield(); command at line 106 and 200 of the VoiceRecognitionV3.cpp file.
Since then - no problem at all, works like a charm.
I've tested using SoftwareSerial connected to D6 and D7 of my wemos module (IO12 and IO13 on ESP). Works OK, training it now :)
I'll have to write a code for it to send MQTT commands, but this will be perfect - I can put it to multiple rooms.
My start command, btw, is "Hey, Jarvis" :)
@@rklauco Thanks for getting back to me and giving all the details! Could you do me a favor and test if it can also recognize sounds like a doorbell? Or does it just work with more vocal sounds? Thanks again!
Wow amazing can I ask how did you group the command did you load first all command before you group it
I have questions: Can you change the text to speech voice to a different one? Can you plug it into a portable power module? does It need to be plugged into a computer for it to work?
Fantastic my friend. Have a good Christmas and New Year. Look forward to the videos 👌👌👌
There’s a Movi speech recognizer and speech synthesizer board that technically also do the command. Either by closing a circuit or pwm. Not sure yet, I have not gotten deep into it yet but some of the Amazon reviews I saw were quite advanced and capable.. “the R2D2 video” but that board will be plenty to meet my needs in a 1/7 scale RC car application. Lights, fans, blow flames, start engine or engine sounds, music, and just conversation. What I’d really like is if u can also have it read out live Lipo voltages and motor temps and ESC temps. Would I be asking to much for gps/mph and G force lol?? Anyhow if you have content or experience with that board, I’m definitely going to be looking for it as I look at most of your videos!
E blana, ti-am vazut commentu la BMV de la Nane :))
Great video. What’s the maximum distance that the microphone can hear?
Good project from Visakhapatnam 🇮🇳🇮🇳🇮🇳
GUYS, quick note here.
I actually tried this on mega because I have a project using the voice recognition module in arduino mega.
You guys need to connect pin 10 to tx and pin 11 to rx not the other way around.
Ps: But if it works for you then I guess it's fine. Just that mine doesn't work when my tx is 11 and rx is 10
Good ! Already ordered one, on Ebay (less expensive)
Hi; excellent video, thank you so much for sharing to. I'd like to control a tool with my voice, however I wouldn't like to do a full Arduinno course. Is it possible to complete this project without having Arduino knowledge?
The aliexpress sales page says it can only do 80, but that's plenty enough to locally control a house without needing internet.
Thank you bro😍😍😍, love this so much
Yes, but what are the other pins for? Just want to know in case they are ever useful or anything.
This is a nice project.
Can this be used to recognize music?
Say I sing a song correctly, an LED should come on, if I sing it wrongly, nothing should work, maybe a red LED.
this is extremely interesting !!! it will be best for home automation on the cheap !!
Can't equal alexa! Any noise in the background causes failure. (motor running sound on robot, TV set, other people in room making noise) Also, over time your voice changes so you have to re-train it again. Sensitive to volume level. (you must be close to microphone or many fails.) Won't work for different people. Some words can't be trained successfully. (these are problems I ran into)
You sound more like "what a time to be alive". Legends will know 😌
Woooooooow weeeeeeee I love it...you have a new sub
This is really cool (and the pokit too )
Thanks for sharing! I can see many use cases for this 👍🏼
Anyone know the IC used on the board? Can the black gue be removed somehow to reveal the chip? 🤔🤓
Beautiful module and excellent explanation
Thanks
Indeed
Hello sir I want your help in one of my project. Can you pls guide how I can detect sound in the electrical panels ziiiii like chirping sound in the electrical system.
Great video and very nice module. Does the library work with ESP32?
I have the same question
Thx a lot for this great video!!
When I'm searching for the module, or clicking on the Ali-Link you provided, the actual V3 only shows 80 possible commands.
Do you know, if there is still a 254command version available, somewhere?
thx and greetings!
Hi... great video. How would i use the voice command module to hear a keyphrase or word and reply with a prerecorded wave file thru an onboard speaker?
Vraiment très intéressante vidéo, Merci beaucoup
@Eletronoobs Sir please can you share final code for controlling led?
This looks good, but I suspect people will compare with natural language processing systems. Does this require that you don’t slur words together? Must the user know that commands should be fully separated with a tiny amount of space? It seems a shame that they cannot include double the amount of storage / analysis buffer ie 3000ms. Interesting video though.
Good idea and simple. thanks for sharing
Ahhhh If I could submit 1000 likes at once. You are outstanding man.
I think you are making Jarvis.
Very cool! Would this work for other languages as well?
Are you seriously asking that stupid question or is it a joke?
Any lenguage
It's only recognising the tones of your voice, so it'll work with any language, even completely made up words, but it will have a trouble trying to understand two people with different accents
@@longdongsilver4719 yes, I'm seriously asking. Glad you are so smart to already know it, even though you didn't answer!
Nice product
can we record a request like if i want to do a chat gpt robot i will say the wake word and after that i want the module to record what i say after and then when i say im finished the arduino send this voice to a speech to text api and then removes the record from the module
Fantastic video. Thank you!!! 😊
Awesome 👏🏻
HI , I'm interested in the code , i liked the way implemented the combination of commands . can you share the code ?
Hi, thank you. Do you think if it 's possible to use this module to reconize a number between 0 and 100?
You can only max out at 7 commands a group, so you would have to do something like
“Get a number from 1-7”
“6”
“Get a number from 30-37”
“32”
tempted to use thia with my esp32 internet radio media player, not sure how well it will work from a diatance and ahilst music is playing
o my is this programming or magic??? 😎 the voice control would also be cool for using modbus plc registers for IOT machine control. 😍 thanks
Make a video about using a voice recognition V3 with a program access port137
Great video on a really cool module... Thanks friend....
Sweet! Thank you A LOT!!!!!!
For every command it is showing timeout.The only functioning command is 'help'.
How can I fix it?
Dd you check for tx and rx pins??
Dude i literally was just building a project with this lmao
Where do I go to learn more about these? Is there a forum or another resource that I could have dialogue with someone?
Hello, I have a question, do you use Voice Recognition Module - 254 Voice Commands + UART with raspberry, I have migrated some projects from Arduino to Raspberry, Will be this case?, i am interested too, add commands to smart car or others apps
Nice video ! Have you tried the new Arduino Pro Nicla Voice ?
Not yet!
@@ELECTRONOOBS ok, thank you ! It would be great a video on it !
I wad following the same way u said ... But while loading the voice it says voice untrained.... Can u help me what to do next
Am facing the same issue
Did you get the solution
Where is the code your example you provide in the video ?
@ELECTRONOOBS ???
Ok but does it save the commands in flash? Or it will reset after power cycle?...
Hola genio. Feliz año. Tienes esto en español??
just bought it, thank you
very well done. thanks for the tutorial.
This is awesome !
Awesome you just help me with my project
You probably get hundrets of questions like this. I have a channel with Arduino contant. I am monetised but it is not growing as I would like. Not saying that I am loosing my faith but I would lie to know what avarage watch durations you get on your videos. My tutorials get 25% to 40% and I do not know if it is decent result on the technical channel like this.
looks like a pain to configure, have you tried the mikro e speak up click board for comparison?
Could be better if you show us the screen in closer. Btw good job. Thank you for make this and share.
Hey thanks so much for sharing. I followed the steps and when i tpyed " train 0 " and entered, "speak now" didn't show up and instead it said " train time out" what should I do to fix? I have no idea what to do now
Iam having the same issue.
Not just for train, for every command it's saying timeout, the only functioning command is 'help'.
Did you fix it?
If did, please share how to fix it.
great video!
i have doubt whether we can connect the voice module without arduino board.? Please clarify.
It can only store up to 80 voice commands, not 254. You can cleary see that in the aliexpress product page, and also the parameter for the"record" command, is a number between 0 and 79, giving the total 80 voice commands. Please, update the video title, it's giving misinformation.
The version he is using is v3.1 while the link he provided is to buy the v3.0. I found the 3.1 on ebay but I would l to know if there is another way to buy it, maybe cheaper.
@@Mattiaeragiapreso The 3.1 version also has 80 voice commands.
How sensitive is the microphone? how close you need to be to it for it to recognize anything?
Hello I'm using this same module once i started training the voice but by mistake i trained 2 in same sigtrain after its showing timeout error
would it be possible to add the code that was used in the video to your website?
It would be great to have it and change variables on it so it can control what suits my application.
rather than writing everything again. especially since in new to arduino writing arduino code.
thank you
Can you make a video on connecting this setup to Arduino Uno rather than Arduino mega?
Why not just use raspberry-pi-like thing and get full voice recognition? Is it only about power usage?
Can it it be trained and recognise clap sound?
May be your views are less
But your information is marvellous
Always make videos like this sir❤️❤️❤️❤️
if anyone have a timeout error do this
Click ctrl F and search timeout it will pop up then go 7 lines up u will find this line "if(ret >= 0)" change the 0 to -0 that's all the base code is wrong hope that works if u are wondering im just 14 years old i am not an expert
Hello sir can this module recognize sirens, horns etc? Other than the human speech commands?
thank you, very informative
Can it understand commands indifference accent if only one accent is trained with
I am from India and you speaks like a cute boy and I like it.