Thank you so much for uploading this video.as you may know understanding of wellhead is very hard and now I know the differences between casing spool.tubing spool and ... well Thank you
In the video, he said a scentence which is " The surface pipe is drained " , what does he means ?? How to drain surface casing ?? Can you please explain more ??
@ghostdevill There are some more parts to install before we set up the oiljack ( pumping unit ). Such as ( inside the well ): tubing pump 2" + tubing production 3" + tubing hanger /tubing head. Tubing head is istalled /sit inside the wellhead /casing head. More parts ( inside the production tubing ): plunger ( will run into the tubing pump ), sucker rods ( above the plunger till the tubing head /tubing hanger ). More parts on the tubing head /tubing hanger: pup join 3" × 2' + T 3" + stubbing box + polish rod + pony rod. The polish rod will connect to the oiljack ( pumping unit ) by using some clamps. The plunger + sucker rods + polish rod + pony rod will go up and down to pump out the oil. The oil will go aside by the T 3" and enter the flow line heading to the gathering station.
from 7:07 , it become totally wrong, drill out the production casing float shoe will let the formation fluid came into the casing. When the producting start, you will find not only gas and oil that you want.
Very useful animation, thank you. Did you leave out removing the wear bushing before running casing to not make the animation overly complicated or do you not need to remove the wear bushing for your wellhead?
In the video, he said a scentence which is " The surface pipe is drained " , what does he means ?? How to drain surface casing ?? Can you please explain more ??
Iam new one in this field after learn can better work .Because professional in any trade such as Electrical,Mechanical Engineering can learn better after watch video.
In the video, he said a scentence which is " The surface pipe is drained " , what does he means ?? How to drain surface casing ?? Can you please explain more ??
@@user-kn9it6be4b In the video, he said a scentence which is " The surface pipe is drained " , what does he means ?? How to drain surface casing ?? Can you please explain more ??
All is good but how can you nipple down diverter before cutting the casing above the diverter ? This dose not make any sense … first cut the surface casing above the diverter then nipple down diverter
In the video, he said a scentence which is " The surface pipe is drained " , what does he means ?? How to drain surface casing ?? Can you please explain more ??
In the video, he said a scentence which is " The surface pipe is drained " , what does he means ?? How to drain surface casing ?? Can you please explain more ??
I always enjoyed machining the various spools, adapters, bushings, hangers, annulars and ram blowout preventers but even more to see how they’re used.
I am truly interested in more videos about Completion and Workover processes ...Keep up the good job
Best video I have seen explaining the well head and BOP installation
Ibrahim..Thanks for step by step information..really helpful
Thank you so much for uploading this video.as you may know understanding of wellhead is very hard and now I know the differences between casing spool.tubing spool and ... well Thank you
Elie Meyer, the wear bushing is removed, otherwise there would be no space for the casing hanger to be installed in the casing head housing / spool.
Short and very understandable!! Thanks for this
In the video, he said a scentence which is " The surface pipe is drained " , what does he means ?? How to drain surface casing ?? Can you please explain more ??
@@الاميرعبدالكريمراضي If u have got the answer, Could you please tell me??
Even I have the same doubt..
Sir very informative video
Thank you sir
Fantastically useful video, i would recommend to add some explanations for devices used like a bushing etc.
Thanks so much for the video Ibrahim.
But how does this wellhead works with a oiljack?
@ghostdevill
There are some more parts to install before we set up the oiljack ( pumping unit ).
Such as ( inside the well ): tubing pump 2" + tubing production 3" + tubing hanger /tubing head.
Tubing head is istalled /sit inside the wellhead /casing head.
More parts ( inside the production tubing ): plunger ( will run into the tubing pump ), sucker rods ( above the plunger till the tubing head /tubing hanger ).
More parts on the tubing head /tubing hanger: pup join 3" × 2' + T 3" + stubbing box + polish rod + pony rod.
The polish rod will connect to the oiljack ( pumping unit ) by using some clamps.
The plunger + sucker rods + polish rod + pony rod will go up and down to pump out the oil.
The oil will go aside by the T 3" and enter the flow line heading to the gathering station.
Very interesting video. Thanks for your post
from 7:07 , it become totally wrong, drill out the production casing float shoe will let the formation fluid came into the casing. When the producting start, you will find not only gas and oil that you want.
Here after "The Ice Road".
thanks Ibrahim, very helpful
why we drill with 30 inch or more casing while we will end up with 7 or 8 inch? I mean why we don't drill with 8 inch casing from the start?
Very useful animation, thank you. Did you leave out removing the wear bushing before running casing to not make the animation overly complicated or do you not need to remove the wear bushing for your wellhead?
Informative and well animated :)
In the video, he said a scentence which is " The surface pipe is drained " , what does he means ?? How to drain surface casing ?? Can you please explain more ??
Soutwoods city
@@الاميرعبدالكريمراضي? I hope you know drilling mud used
Iam new one in this field after learn can better work .Because professional in any trade such as Electrical,Mechanical Engineering can learn better after watch video.
Thank you brother for this video which help me to understand what I have been study
GREAT VIDEO. Thanks for sharing.
Test plug only goes neck up to install wear bushing and to retrieve wear bushing after drilling is complete
How can connect with u
Do u have linked email sent it to mr
In the video, he said a scentence which is " The surface pipe is drained " , what does he means ?? How to drain surface casing ?? Can you please explain more ??
@@user-kn9it6be4b
In the video, he said a scentence which is " The surface pipe is drained " , what does he means ?? How to drain surface casing ?? Can you please explain more ??
All is good but how can you nipple down diverter before cutting the casing above the diverter ? This dose not make any sense … first cut the surface casing above the diverter then nipple down diverter
What dose people called working in assembly shop
its very u use full
thank u so much................
THANK YOU MATE. HOW CAN WE GET THIS ILLUSTRATION SOFTWARE
nice video. but i think u can add in when we remove the wear bushing. anyway thanks for sharing
In the video, he said a scentence which is " The surface pipe is drained " , what does he means ?? How to drain surface casing ?? Can you please explain more ??
it is very good animation , but it will be better if you should made it with more details
Thanks a lot😍it was very useful ❤🥳
Good vid. What kind of programe is that though, is it downlodable?
Thank you very much 🤗🤗🤗
From where I can get this learning material
good video, thank you very much
Great video!
Very informative. Thanks for sharing.
it is very clear, thank you
Pwoli saanam.
Very Informative ... Thank you
excellent !!
I WOULD LIKE to know more about istalation well head...thanks
In the video, he said a scentence which is " The surface pipe is drained " , what does he means ?? How to drain surface casing ?? Can you please explain more ??
By creating holes in the pipe
Interview ma kis type kyy questions put kra gyy
what is wellhead tie-in sir
Very useful. Thank you
Good information those working per API 6A
great video!
Curious. What is the actual source material that you took this from?
Great video! Thanks!
thank you so much it's really help full
informative one. Great
Thank you
Joss
Pressureformationknowlegefromwhat? Oressuregafe
Thanks friend!
Good job
very knowledgable...
thks
اسمه ايه الكورس ده ؟؟ اسطواناته اسمها ايه ؟؟؟ونحملها منين ؟؟
Ты кто такой?
wellhead installation &multi-zone completion
Well information
Thank you very much
Excelente!!!
Good ,,,
Test plug goes neck down to test bop.
i find out after ice road movie
I mean its a great video but leaves many questions
Installation!
thank you
Nice
Ibrahim: please correct Wellhead Installation.
This picture worth a thousan word point stated do it right the firsr time
شكرًا احسنت
Good job thanks
nice
4:43
No entendí nada amigo, esta todo en ingles xD
super
(y)
thanks Ibrahim, very helpful