Diy concrete steps #1 grades and forms

Поділитися
Вставка
  • Опубліковано 8 січ 2025

КОМЕНТАРІ • 81

  • @iraklishengelia687
    @iraklishengelia687 4 роки тому +92

    -You talking to yourself?
    -Nope, just helping a lot of people.
    Thank you man, you're a champ!

  • @HinesInSight
    @HinesInSight 4 роки тому +13

    I'm contemplating redoing my front steps on our 114 year old house. This video really helps me to figure it out. With a $3000 estimate to have it done; I may just try it myself. Great video.

    • @VanDamArtisan
      @VanDamArtisan  4 роки тому +6

      Yeah, you can save a bunch doing it yourself. I would recommend having a helper or two but $2-300 in labor to help with the pour is a lot different than $3000. Good luck with your future projects!

    • @evalzeyn9730
      @evalzeyn9730 3 роки тому +1

      Heck yeah man, you got it 🙌 nothing is impossible. Just finishing the concrete can be a bit tricky

    • @eddyflo2978
      @eddyflo2978 Рік тому

      114 year old house, sounds like a new one is due 😆

  • @Jarrygames86
    @Jarrygames86 3 місяці тому +1

    This is what UA-cam should be!! Good information about something that helps. Hell yea! I didn't even know I needed to know this. But hell I'm glad I watched.
    Good show man 👏

    • @VanDamArtisan
      @VanDamArtisan  3 місяці тому

      Thanks for that! I forgot to bevel the face forms though. It makes it easier to finish later, but not essential.

  • @krummstadt
    @krummstadt 2 роки тому +9

    - Are you talking to yourself...?! - Yes! lol

  • @4doors_m0r3wh0r3s
    @4doors_m0r3wh0r3s 3 роки тому +35

    When Americans find out about screws they will become unstoppable!

    • @VanDamArtisan
      @VanDamArtisan  3 роки тому

      I'll look into that!

    • @allgutsnoglorywtg
      @allgutsnoglorywtg 3 роки тому +6

      Screws are pretty trash for concrete. The heads fill with concrete or dust/ dirt. You spend more time on stripped screws than anything.

    • @VanDamArtisan
      @VanDamArtisan  3 роки тому +4

      Plus they tend to break much easier than nails.

    • @4doors_m0r3wh0r3s
      @4doors_m0r3wh0r3s 3 роки тому +3

      @@VanDamArtisan that's like saying paracord is longer than rope, a half inch thick coach screw with a hexagonal head on it isn't going to break easily or get cement in the head

    • @VanDamArtisan
      @VanDamArtisan  3 роки тому +1

      Touche

  • @mattbeck3933
    @mattbeck3933 3 роки тому +4

    Nice work. Am preparing to do my own landing/steps off my deck.

  • @ntoomey2147
    @ntoomey2147 4 роки тому +14

    I like the used oil idea. I mean why pay for something specifically made for a task, when you've already bought and no longer need something that will work that you've already paid for. Now THAT my friend is recycling in it's truest form. I know that was a long way to a point however, considering the cost of the tools to pour, grade and form concrete these handy dandy ideas can save a way overblown budget for a newbie like myself. Very nicely done video. Ty

    • @VanDamArtisan
      @VanDamArtisan  4 роки тому +2

      Thanks for the nice comment and for watching!

    • @mikep4391
      @mikep4391 10 місяців тому

      Used motor oil is full of carcinogens. Using used oil on form boards deposits the carcinogens in the soil. Anything that is planted there can pick up the carcinogens. Using used motor oil is not a good idea, it's foolish way to contaminate the environment you live in and depending on how much used oil is used, you risk contaminating waterways and other people's property.

  • @hokulea8655
    @hokulea8655 3 роки тому +8

    "Are you talking to ya self" "yes i am" i spat my coffee out laughing😂

    • @VanDamArtisan
      @VanDamArtisan  3 роки тому +1

      Nice!.... Sorry about the coffee mess

  • @kuyajonjon13
    @kuyajonjon13 2 роки тому +2

    more power sir sana mas marami pa kayong mashare na kaalaman sa amin po

  • @rmd35501
    @rmd35501 6 місяців тому +1

    Great tips

  • @GeneracionGoshen777
    @GeneracionGoshen777 2 роки тому +1

    Hi how much a service like this could cost?

    • @VanDamArtisan
      @VanDamArtisan  2 роки тому

      Probably around $10/ square foot. It depends though because most people don't like doing steps so they charge more.

  • @trublitz1007
    @trublitz1007 4 роки тому +3

    Use a lazer. Shoot the top, shoot the bottom, ÷ 7 or 6 or 6.5 ........

    • @VanDamArtisan
      @VanDamArtisan  4 роки тому

      That's definitely the dead on way to do it. Plus, you can establish your steps in relation to the house and yard and driveway much easier

    • @benl3rd
      @benl3rd 4 роки тому

      Why 7 or 6 etc is that the number of steps

    • @VanDamArtisan
      @VanDamArtisan  4 роки тому +1

      I believe he's talking about the height in inches of each step

  • @swiss6253
    @swiss6253 2 роки тому +1

    Why is it so hard to get a construction job.
    Tried all my life and never got so much as a call back.

    • @VanDamArtisan
      @VanDamArtisan  2 роки тому

      Contractors are flaky by nature. Try showing up at their job site. That usually works.

  • @Vvision456
    @Vvision456 Рік тому +2

    3:00 lmfaooo

  • @Ruben901
    @Ruben901 3 роки тому +2

    I thought it was Jean Claude Van Damme's concrete company for a minute 🤣🤣

    • @VanDamArtisan
      @VanDamArtisan  3 роки тому +1

      I have a hard time filming while doing the splits and finishing concrete. But I do it anyways concrete I'm a VanDam!

  • @Doorbuster456
    @Doorbuster456 Рік тому +1

    1:19 volume warning would've been nice

  • @bradleywiseman2649
    @bradleywiseman2649 3 роки тому +2

    Brilliant

  • @jtrujillo784
    @jtrujillo784 Рік тому +2

    U talkin to yaself ? 😂🤣🤣🤣🤣
    Yes

  • @Jenuin
    @Jenuin 3 роки тому +2

    3:00 are you talking to yourself? that's what us youtubers do lol

  • @Electriclynn
    @Electriclynn 3 роки тому +1

    XoxoxoxoX I love you 💕. Said this slug

  • @reidarbensaude349
    @reidarbensaude349 2 роки тому +2

    Wtf did I just learn here?

  • @michaelrossbach8683
    @michaelrossbach8683 2 роки тому +1

    Camera way to close

  • @juliogochezbajoquinto9539
    @juliogochezbajoquinto9539 4 роки тому +4

    Are you talking yourself?! 😂

    • @VanDamArtisan
      @VanDamArtisan  4 роки тому

      Those darn voices just won't stop!

    • @scaredyfish
      @scaredyfish 4 роки тому +1

      I’m talking to the UA-cams!

  • @666lockupeviltrump
    @666lockupeviltrump Рік тому +1

    yeah, I have to use nails, nails, nails nails......... ever hear of screws?

    • @VanDamArtisan
      @VanDamArtisan  Рік тому +1

      Is that those funny looking nails with the swirl things up the sides?

  • @happynursemama
    @happynursemama 3 роки тому +1

    I made a comment on this guys videos on my wife's UA-cam. Within 1 hour he turned around and creeped my wifes account and trashed talked her in a reply. Stay classy buddy. You might want to post better videos if you can't take a reasonable poor review. WOW. Seriously

    • @VanDamArtisan
      @VanDamArtisan  3 роки тому

      I believe you threw the first blow. Not exactly classy.

    • @VanDamArtisan
      @VanDamArtisan  3 роки тому

      Maybe you should give your wife advise instead of me.

    • @VanDamArtisan
      @VanDamArtisan  3 роки тому

      Wow

    • @VanDamArtisan
      @VanDamArtisan  3 роки тому

      Maybe you should have the balls to trash talk from your own channel.

  • @dalejohnson9031
    @dalejohnson9031 3 роки тому +1

    Nice try but not very helpful buddy

    • @VanDamArtisan
      @VanDamArtisan  3 роки тому +3

      Well, I have 3 different videos to choose from so hopefully you'll find something eventually.

  • @jordanabergel6408
    @jordanabergel6408 3 роки тому +1

    Wasted my time. Wanted to see the whole thing. Not half way