it is looks like eazy in this video, cus he is pro. I have some knowledge about my Toyota Sienna 2000. I spent time 4hours replace rear valve cover gasket and sparks plugs. litttle different with my car in this video clip, There are 2 brakets behind the valve cover, it is really hard to reach open and rock bolts, and power grounds. Anyway, I replaed rear gaskets, and PCV valve, cleaning Throttle body, it was reall tough and hard job. After that I proud my self. I recommand you go to garage to fix your car.
@@JM-AUTO I think the confusion is that when they were originally installed, the spring around the seal was on the inside of the valve cover, but when you installed the replacements the spring around the seal was on the outside of the valve cover?
@@oldpartsnrust not the first to be confused about this gasket on these siennas, you will see some people installing them the other way and some the way i did it, you can install it either way but the other way it will soon leak oil, i have seen only one or 2 guys installing it the correct way. hope this helps.
Oops. I just did this horrible job and installed the spark plug seals the other way. NEVER gave it a second thought because the back of them looked like the original seals. Hopefully it will be ok......
Nice video! But what a pain for just a valve cover gasket! I’m buying an in-line 4 next time…
yes it is kind of a lot of work to do the valve cover, thanks for visiting this channel I really appreciate it.
it is looks like eazy in this video, cus he is pro. I have some knowledge about my Toyota Sienna 2000. I spent time 4hours replace rear valve cover gasket and sparks plugs. litttle different with my car in this video clip, There are 2 brakets behind the valve cover, it is really hard to reach open and rock bolts, and power grounds.
Anyway, I replaed rear gaskets, and PCV valve, cleaning Throttle body, it was reall tough and hard job.
After that I proud my self.
I recommand you go to garage to fix your car.
thanks appreciate your time on the channel and thanks for sharing.
Great details. Thanks. I’m a little confused about the position of the Grommets ?
thanks for visiting my channel, did you see when I installed the grommets, that is how they go in the valve cover. thanks again
@@JM-AUTO I think the confusion is that when they were originally installed, the spring around the seal was on the inside of the valve cover, but when you installed the replacements the spring around the seal was on the outside of the valve cover?
@@oldpartsnrust not the first to be confused about this gasket on these siennas, you will see some people installing them the other way and some the way i did it, you can install it either way but the other way it will soon leak oil, i have seen only one or 2 guys installing it the correct way. hope this helps.
This is the right way.
Thanks for sharing great video ever🌴🌴
Glad you enjoyed it, thanks for sharing, very much appreciate it.
Great video. Very detailed. Thank you.
Glad it was helpful! thank you.
damn this engine is really caked up, they probably changed oil every 20k miles if that😂
Esto funciona cuando tata pasando anticongelante también o ese es otro tipo de empaque??
este es empaque de tapa de valvula, yo creo q usted se refiere al empaque de cabeza q divide el agua y el aceite si tengo razon entonces este no es.
@@JM-AUTO ok
Gracias es que está pasando anticongelante
Very informative
Glad you liked it.
Great video. Thank you!
Glad you liked it! thank you.
How much for this job?on 2007 toyota avalon
hoigame travajo de un dia pero hay que aserlo Dios te Guarde grasias por esta ecenansa
gracias Amigo
Thank you papa
thank you
Great video easy to follow
Glad you liked it, stay bless.
please make video 08 sienna water pump replacement
here is the link for 07-2017 sienna: ua-cam.com/video/Qz1Rk1eEEn4/v-deo.html
Oops. I just did this horrible job and installed the spark plug seals the other way. NEVER gave it a second thought because the back of them looked like the original seals. Hopefully it will be ok......
Oh no. How did it turn out? Are they leaking? Im doing this job now. Has taken several evening after work.
Seems to b ok@@vintage35171
That's weird in the other video there the other way. I believe this job has been done before on this van
I did that too, about 45,000 miles ago and it's leaking pretty good again. bout to do it again...
mucho gracias sir
you welcome and thanks for visiting my channel.
What is the bank # of the O2 sensor? AND great descriptive video how to.
bank 1 is the rear cylinder head by the fire wall, bank 2 is the front cylinder head.
@@JM-AUTO thank you!
tape gos on top of wiper lol
thanks for the visit, I appreciate it.
The air filter wrong position
Man everytime we get a newer car they get harder to work on. 2006 4runner was so much easier
totally agree with you. thanks for the visit.
Toyota puts stuff in hard to reach places