You didn't mention the best feature of all, IMO. I needed a device to amplify my Bluetooth signal around my house, and the Bluetooth that comes with my PC is really only good for the same room. With this device in TX mode, I can broadcast a Bluetooth signal all over my house. This is really useful because I'll play a podcast on my main PC and I can listen to it all over the house with my headphones, as I move around.
The manual doesn't state a thing but a commenter on Amazon says the following: "Some people, including 1mii support, have answered this here that is does indeed support AAC. I don’t know if that is TX & RX? didn’t believe it supports AAC, just registers as SBC via status light on the unit, for example when receiving FROM an iPhone. That said, the 1mii B03 Pro that has the upgraded DAC sounds terrific when receiving even the SBC sound because of the 32 bit / 384 kHz DAC. It upsamples somehow, I think… or it does really receive unaltered AAC from iPhone and decodes it. For transmitting from the unit TO headphones, it is either taking the analog (using an ADC) or SPDIF digital input and sending via Bluetooth codec supported by the receiving device (Bluetooth headphones/speaker). If you have the Sony XM4, AND it truly supports AAC (no way to see on 1mii lights), it should be AAC. I have the XM3’s which strangely support SBC, AAC, aptX, aptX HD, and LDAC. don’t know why Sony dropped aptX on the XM4. The transmission to my XM3’s does show the AptX and HD lights on the 1mii, so I guess I “know” it is aptX HD. Hope this helps."
Thanks! Don't get much reviews on this unit anywhere else. Was there any discernable difference in audio quality compared to other bluetooth transmitters/receivers? since it has a built in DAC?
No, record players require a preamp input which includes built in "deemphasis" EQ curve to compensate for the preemphasis curve present on all records (also known as the "RIAA curve"), so you should only use a phono preamp input. If you plug a turntable output direct to regular RCA aux inputs, the signal will be very quiet, plus it will sound incredibly shrill/tinny and lack almost all of its bass.
Hi, all my wall mount speakers’ wire is in the basement. I bought a Bluetooth receiver to connect those wire , but it only work in phone. Since my tv is on 1st floor it doesn’t catch Bluetooth signal . So I bought this 1Mii B310. It works well in phone but tv doesn’t catch signal again. If i stand next to tv and try connect my phone to 1Mii , it works but not tv. Any help???
They have speakers that pair to each other but I believe your phone is only going to pair to one item at a time - I may be wrong. Anyone else have the answer?
From 1Mii's information it seems that this doesn't support LDAC -- they list available codecs as: aptX-HD, aptX-LL, aptX, FS, SBC. AAC and LDAC are not listed. The ESS SABRE DAC isn't a codec, it's the chip that converts the digital signal to audio. If you want more info on the ESS DAC it's model 9018Q2C
Apparently not this version. There seems to be a newer version, *PRO+* which supports LDAC. So the newer version with the "+" sign after the model number & "pro" has it. You can do a search online to confirm.
oh my god what a terrible review !!! no explanation whatsoever as where the cables are connected. Suggestion : PLEASE turn the Bluetooth Adapter around to SHOW where exactly how to connect the cables ? Also turn your filthy Pioneer amplifier around, again to show us the connection. Batteries and Volume Controls ? Very relevant? What about audio quality, APTX etc etc etc
Could i use 2 of these as a means of connection between 2 units that both are not bluetooth devices? So i will transmit from one source like a mixer and use the other in rx mode to receive the signal and play it through a bigger sound amplifier?
Small addition, if you use USB (power) from your PC it also supports sound -by-usb (be aware that overrules analog/optical input!).
Good info!
You didn't mention the best feature of all, IMO. I needed a device to amplify my Bluetooth signal around my house, and the Bluetooth that comes with my PC is really only good for the same room. With this device in TX mode, I can broadcast a Bluetooth signal all over my house. This is really useful because I'll play a podcast on my main PC and I can listen to it all over the house with my headphones, as I move around.
So I can hook up to Bluetooth speakers like block rockers to my TV if it's hooked up to the tv the right way and I have 2 or 3 speakers at 1 time
Should work as long as your TV outputs can connect to the input of the transmitter.
Thank you!
You're welcome!
Can you connect two Bluetooth devices wired to one speaker?
Thank You. Excellent instructions.
I have the 1mii bo6 which I love
Tô numa dúvida cruel se vale a pena comprar. Meu aparelho de som é antigo. E com ele poderia conectar o celular via bluetooth e muito mais. ...
Any idea how to switch it from sbc to aptx? I CANNOT figure this out.
The manual doesn't state a thing but a commenter on Amazon says the following: "Some people, including 1mii support, have answered this here that is does indeed support AAC. I don’t know if that is TX & RX? didn’t believe it supports AAC, just registers as SBC via status light on the unit, for example when receiving FROM an iPhone. That said, the 1mii B03 Pro that has the upgraded DAC sounds terrific when receiving even the SBC sound because of the 32 bit / 384 kHz DAC. It upsamples somehow, I think… or it does really receive unaltered AAC from iPhone and decodes it.
For transmitting from the unit TO headphones, it is either taking the analog (using an ADC) or SPDIF digital input and sending via Bluetooth codec supported by the receiving device (Bluetooth headphones/speaker). If you have the Sony XM4, AND it truly supports AAC (no way to see on 1mii lights), it should be AAC. I have the XM3’s which strangely support SBC, AAC, aptX, aptX HD, and LDAC. don’t know why Sony dropped aptX on the XM4. The transmission to my XM3’s does show the AptX and HD lights on the 1mii, so I guess I “know” it is aptX HD. Hope this helps."
Thanks! Don't get much reviews on this unit anywhere else. Was there any discernable difference in audio quality compared to other bluetooth transmitters/receivers? since it has a built in DAC?
Maybe I'm not a true audiophile, I can't discern a huge difference in my setup:-)
@@Pondsisawesome124 Thanks for the reply. Cheers buddy!
Curious to know, How much Wattage is required for power via USB-C ?
Maybe contact the manufacturer or ask on Amazon as I have no data for that.
Can I connect my record player directly to this device? Audiotechnica at-pl 300?
Not that I'm aware of.
No, record players require a preamp input which includes built in "deemphasis" EQ curve to compensate for the preemphasis curve present on all records (also known as the "RIAA curve"), so you should only use a phono preamp input.
If you plug a turntable output direct to regular RCA aux inputs, the signal will be very quiet, plus it will sound incredibly shrill/tinny and lack almost all of its bass.
Thanks for the review. Maybe a better mic, or overdub next time.
So if I hook this to my home jukebox CD jukebox just like they have in bars it transmitted to a wireless speaker
Should work fine.
Hi, all my wall mount speakers’ wire is in the basement. I bought a Bluetooth receiver to connect those wire , but it only work in phone. Since my tv is on 1st floor it doesn’t catch Bluetooth signal . So I bought this 1Mii B310. It works well in phone but tv doesn’t catch signal again. If i stand next to tv and try connect my phone to 1Mii , it works but not tv. Any help???
Range on Bluetooth can vary greatly especially depending on building materials, etc.
@@Pondsisawesome124 thanks for reply. Got tv connected to Bluetooth and works as well but speakers are making humming sound now.
How is the latency? I’ve tried other receivers in the past and am frankly soured on how bad the latency is with them.
It seems fine for what it is but I'm listening to Amazon music from my iPhone which has it's own set of issues anyway:-)
I m trying to send my phone blutooth music to multiple Bluetooth speakers is it possible 🤔
They have speakers that pair to each other but I believe your phone is only going to pair to one item at a time - I may be wrong. Anyone else have the answer?
How’s the range?
While I didn't test it to max range bluetooth typically has a range of approx 30 feet. I had this one out to approx. 15 feet with no issues.
has NFC ??
No, not according to the specs.
@@Pondsisawesome124 thanks. too bad. the basic model has.
plugged in not plugged up thanks
In the south people generally use the term plugged up. Like shopping buggy as opposed to cart etc. :-)
@@Pondsisawesome124 when i hear plugged up i think backed up toilet or sink
hi this device can use power bank?
Yes you can since it's USB port powered.
@@Pondsisawesome124 aite thanks man
Got one more q.
If i want to pair with my hp or ipad with 2 blutooth speaker is this device working? Sync with 2 spekaer at one time?
You should be fine as long as the speakers are setup to pair to each other:-)
@@Pondsisawesome124 okies. Thanks for clarification.
Can it do ldac
The specs state "Built-in ESS SABRE DAC". Hope this helps you:-)
From 1Mii's information it seems that this doesn't support LDAC -- they list available codecs as: aptX-HD, aptX-LL, aptX, FS, SBC. AAC and LDAC are not listed.
The ESS SABRE DAC isn't a codec, it's the chip that converts the digital signal to audio. If you want more info on the ESS DAC it's model 9018Q2C
@@irridiastarfire ess sabre dac, which is arguably just as important
Apparently not this version. There seems to be a newer version, *PRO+* which supports LDAC.
So the newer version with the "+" sign after the model number & "pro" has it.
You can do a search online to confirm.
oh my god what a terrible review !!! no explanation whatsoever as where the cables are connected. Suggestion : PLEASE turn the Bluetooth Adapter around to SHOW where exactly how to connect the cables ? Also turn your filthy Pioneer amplifier around, again to show us the connection. Batteries and Volume Controls ? Very relevant? What about audio quality, APTX etc etc etc
Could i use 2 of these as a means of connection between 2 units that both are not bluetooth devices? So i will transmit from one source like a mixer and use the other in rx mode to receive the signal and play it through a bigger sound amplifier?
Exactly! Not even a showcase of hpw good/bad latency is.. terrible review..
Very shabby review nothing in depth at all for the beginner