3 wheel drive in that model happen be cause of the loose nut of the wheel, so the drive shaft spin free without transering force to the whee, o always carry the key to tight them and use locktite, good review in general.
@@alexjohnson2088 I had the carnage and had it running 3s with a brushless system of course and it was fine it depends what type of bashing you’re doing if it’s at the skate park then yeah it’s going to brake but in the local woods or the odd jump of the little plastic ramps you can buy in Argos you should be fine
Hello friend, great video! Do you have any problems when driving on 3S? Do you use a fan for the ESC? I also use metal reinforcement for the chassis, and I find that the downside is that it bends the front very easily. Whenever I hit something, even at low speed, the front part of the reinforcement bends.
I'm a noob at rc. Just picked up the FTX Ramraider. Brilliant little basher. Done my first rc upgrade the other day. Put a 20kg steering servo on it. Loving my new hobbie still learning as I go.
Brought 2 of these for Xmas gifts both of them snapped a front cvd, not sure if they have been a dud batch or not, hopefully get a better go out of them after repair
Hey wutsup Guys, im a noob and I would love to see a up close and a drive to. Just a normal rip. And yes i learned to check my wheel nuts before I take any truck or a car. 🤗🤗🙏✌
good thing is mjx made a better car for bashing and might be the best cheap 3s rtr Its model varient 16208 comes with clipless body just like traxxas I wish to watch on your channel mjx 16208 on this skate parrk.
![Grease the diffs WLToys 104009 [ TO STOP DAMAGE ]](http://i.ytimg.com/vi/ng82z_Adw3I/mqdefault.jpg)
![Grease the diffs WLToys 104009 [ TO STOP DAMAGE ]](/img/tr.png)
Decent cheap bash bar that to keep the chassis from snapping at the ends cheers Ben 👍
Are you missing a video these days? Looking forward to the new video. And I wish you a good end to this year and a happy new year. thank you👍👍👍
3 wheel drive in that model happen be cause of the loose nut of the wheel, so the drive shaft spin free without transering force to the whee, o always carry the key to tight them and use locktite, good review in general.
Cool RC and bashing, great information
Where you gone Ben. Missing your content. How’s the xmaxx project
This looks like a cool cheap basher. I'm still set on getting carnages for Xmas unless something better comes out
I’d honestly buy the carnage’s there a pretty safe bet and as I’ve learned the first choice is usually the right one
I've seen people moaning about them breaking but so does everything if your bashing right? And they sell parts in 2 places less than 10 miles away
@@alexjohnson2088 I had the carnage and had it running 3s with a brushless system of course and it was fine it depends what type of bashing you’re doing if it’s at the skate park then yeah it’s going to brake but in the local woods or the odd jump of the little plastic ramps you can buy in Argos you should be fine
Where are you, missing your videos
Hello friend, great video!
Do you have any problems when driving on 3S? Do you use a fan for the ESC?
I also use metal reinforcement for the chassis, and I find that the downside is that it bends the front very easily. Whenever I hit something, even at low speed, the front part of the reinforcement bends.
How s it been are all shafts metal please
I'm a noob at rc. Just picked up the FTX Ramraider. Brilliant little basher. Done my first rc upgrade the other day. Put a 20kg steering servo on it. Loving my new hobbie still learning as I go.
the problem is that you have to stop every single other hobby because of the unbelievable high cost for spares. But its great fun if the car drives
Brought 2 of these for Xmas gifts both of them snapped a front cvd, not sure if they have been a dud batch or not, hopefully get a better go out of them after repair
Hello! Havent seen a video from you for a while now. I hope you are ok and will be back soon again 🙂
Hey wutsup Guys, im a noob and I would love to see a up close and a drive to. Just a normal rip. And yes i learned to check my wheel nuts before I take any truck or a car. 🤗🤗🙏✌
No new content?
Missing your vids Ben
Thank you I’m missing making them been working away from home for weeks now.
👍👍👍
good thing is mjx made a better car for bashing and might be the best cheap 3s rtr
Its model varient 16208 comes with clipless body just like traxxas
I wish to watch on your channel mjx 16208 on this skate parrk.
Wheres the Maverick phantom?
And also I reccommend 100% Traxxas XMAX. Unbreakable, fast worth the money. The best Rc car!
Just broke mine at the front 😢, doing hardly anything at all. Sigh. How has this bash plate held up? P.s. where'd you go pal?
Great video dude, i also post similar rc content 👍liked and subscribed btw💪
Hey dude! Where you at? Hope your well 👍🏻🤘🏻🤘🏻🤘🏻
I’m well thank you just works taken me away from home till the end of feb. But I’ll be back.
@@noobrccars4392 Good stuff! 👍🏻🤘🏻🤘🏻
@@noobrccars4392 Where can you get a new body for this anyway?