How To Set Up A Youtube Video Recording System For The Workbench or Hobbyist. Hardware & Software
Вставка
- Опубліковано 1 лип 2024
- A Subscriber asked me if I would describe the video recording system I use for this channel, in detail. Oh well here goes... This setup is one example of how to do this, I think a similar setup would work for any sort of hobbyist use that involves making things, repairing things, and just about anything similar
I work in collaboration with:
The Electronics Channel (with Carlos and Detlef)
/ @theelectronicschannel
Gran Canaria Uncovered
/ @grancanariauncovered (with Detlef and Julie. Not electronics related)
Det Builds Stuff - / @detbuildsstuff8128 (Detlef)
Retro Upgrade - / @retroupgrade (Carlos)
For All Your PCB needs: free $5 discount coupon
www.pcbway.com/setinvite.aspx...
Equipment used in my videos. These are affiliate links, you pay the normal price and I make a small commission.
TEST METERS
Aneng AN8009
s.click.aliexpress.com/e/_DdW...
amzn.to/469ZgOS
www.banggood.com/custlink/mD3...
KM601
s.click.aliexpress.com/e/_DBw...
www.banggood.com/custlink/KD3...
VC480C+
s.click.aliexpress.com/e/_DEY...
amzn.to/3Q3LEz7
amzn.to/46tmNdo
MESR-100 ESR METER
amzn.to/3tiy8hK
amzn.to/3RwvejK
s.click.aliexpress.com/e/_Dmi...
XC6013L CAPACITOR METER
s.click.aliexpress.com/e/_DmX...
amzn.to/3t71Nul
amzn.to/3LDdcbO
TM-902C TEMPERATURE METER
s.click.aliexpress.com/e/_Dm9...
amzn.to/3LFzERv
amzn.to/3PTwuvW
LCR-T4 LOW COST COMPONENT ANALYZER
s.click.aliexpress.com/e/_Dmq...
www.banggood.com/custlink/KKK...
amzn.to/46uzV1R
amzn.to/3RHsmAN
FNB58 USB ANALYZER
s.click.aliexpress.com/e/_Dmd...
amzn.to/3tb1QW8
amzn.to/46oMn30
www.banggood.com/custlink/mKm...
PCI POST ANALYZER
s.click.aliexpress.com/e/_DBs...
amzn.to/46m9Gep
TL460S Plus PCI_E ANALYZER
s.click.aliexpress.com/e/_DnB...
amzn.to/3ZERvOs
TOOLTOP ET829 SCOPE METER
s.click.aliexpress.com/e/_DBw...
www.banggood.com/custlink/KGv...
MULTIMETER PROBE KIT KET05
s.click.aliexpress.com/e/_DE7...
OSCILLOSCOPES
FNIRSI 1014D
s.click.aliexpress.com/e/_DEz...
amzn.to/3RxMFk1
www.banggood.com/custlink/KKG...
FNIRSI DSO-TC3
s.click.aliexpress.com/e/_DC8...
amzn.to/3RBsgdS
www.banggood.com/custlink/Gm3...
FNIRSI DPOX180H
s.click.aliexpress.com/e/_DBX...
amzn.to/468oooT
www.banggood.com/custlink/GGG...
BENCH PSU
NPS3010W
s.click.aliexpress.com/e/_DDP...
amzn.to/3rxsuIf
www.banggood.com/custlink/3DD...
SOLDERING
T12 Station with M8 9501 Handle
s.click.aliexpress.com/e/_DFV...
amzn.to/3FdG8Ul
M8 9501 HANDLE
s.click.aliexpress.com/e/_De0...
T12-BC3 Tip
s.click.aliexpress.com/e/_DeN...
amzn.to/3EUFpqQ
amzn.to/3PB8axw
SUGON T26D
s.click.aliexpress.com/e/_DFx...
QUICK 861DW
s.click.aliexpress.com/e/_DDo...
amzn.to/3PBOKZH
amzn.to/3RCSqNh
PROS'KIT SS-331H
s.click.aliexpress.com/e/_DDo...
SS-331H Spare Parts
www.aliexpress.com/item/40002...
THERMAL CAMERA
Infiray P2 Pro
s.click.aliexpress.com/e/_Dmu...
amzn.to/457PgEb
www.banggood.com/custlink/DDG...
MICROSCOPES
Amscope Optical Microscope (copy)
s.click.aliexpress.com/e/_Dlh...
uk.banggood.com/custlink/mKGy...
amzn.to/4675Qp0
amzn.to/459uvrY
ANDONSTAR AD407
s.click.aliexpress.com/e/_Dl4...
amzn.to/3PSQKxJ
amzn.to/48sxej4
EEPROM Programming
TL866 II+
s.click.aliexpress.com/e/_Dls...
amzn.to/3RTCRB9
amzn.to/3LDu3Lu
CH341A
s.click.aliexpress.com/e/_Dk0...
amzn.to/48IZiir
1.8V ADAPTER
s.click.aliexpress.com/e/_Dci...
CONSUMABLES
NC-559-ASM FLUX
s.click.aliexpress.com/e/_Dda...
DESOLDER BRAID (I use size 8045)
s.click.aliexpress.com/e/_Dl5...
s.click.aliexpress.com/e/_DFJ...
MECHANIC HX-T100 Solder 63:37 (I use 0.6mm)
s.click.aliexpress.com/e/_DeZ...
ESD-11 TWEEZERS
s.click.aliexpress.com/e/_DCZ...
amzn.to/3PVfO7e
Learn Electronics Repair is now on Discord! Come and join the fun, it's free.
/ discord
If you would like to support this channel
You can send donations
www.paypal.com/paypalme/youtu...
You can subscribe to Patreon
/ learnelectronicsrepair
Or you can click Join to become a channel member
Thank you
Richard
I'm an engineer / hobbyist with decades of experience, and I've learned loads from your videos.
Your videos are a joy to watch, you are the epitome of a seasoned pro.
Great video as always, Richard. 😊⚡💡
I recently discovered your channel and I just want to say thank you. I've watched several hours every day for the past two weeks. I would say I had good knowledge in electronics before, but I always learn something new from your videos.
You are a very good teacher, thank you for all your work, it's amazing that you can get such great education for free!
Thanks, good to know.
Thanks for doing this Richard.
looks like space is at a premium around your workbench. I found that quite interesting and the investment you have made in time and equipment shows is the quality of your output.
Thank you, I just downloaded OBS and will start to use it.
Thanks for sharing Richard, very interesting Cheers
Thanks Richard, that's very good information! 😀
Very valuable insights and information! Thank you!
Thanks heaps for the great tips Richard! I'll be using this as inspiration for some videos on my own channel.
great video thankyou for sharing great stuff been watching for awhile now and love it , thanks from Brisbane Queensland Australia
Ok, how to say it? I think you should upgrade your fluorescent strips lights, which provide that (signature?) ghostly green tinge. You could probably, and quite easily, use a reel or two of 12v LED strips, mounted closely together and soldered up. It might even be enough to use the existing light fixture you have once the tubes are removed. You could choose a pre-set colour temperature, or mix between different temp LED strips. Your light would then balance to something more natural and just as bright. I believe some brands give a broader spectrum, avoiding their own eerie colour limitations, so research is a good idea. Cheap too, though an unlikely boot sale find. I think this will immediately improve the look of your videos.
Thanks for the suggestion, I will give this a try and they would be easy to mount on the existing tube fitting
Top notch Richard! Thanks so much! Was much more complex than I was imagining. Great ideas all around! Super informative. 👍🏻👍🏻
Cheers. Most of the equipment is not expensive, the Navceker was about €70 on a special offer, the webcams are cheap. The C Mount 'side' cam with 5-50mm zoom was about €60. The Sony HDR-AX2000 cam is an old model as it is 1080P but they do fetch good money for a used one. The software is all free and the computers are from the car boot sale. The mic is an AT3035
Loving the setup 🎉
Well done video. Thank you Richard
Great Video!! Thank You for taking the time to make all these videos.
Thank you very much for the time and effort to make and share that very informative video 😊
Thanks Richard for sharig. Blessigs
Great setup. I love what you do.
I'm too lazy to edit, I'm still at the click and go-for-it with my phone haha.😊
Most of the editing is just me cutting out the gaps where I had to go and find something
Setup barato e funcional. Muitos acham que precisam investir muito em equipamentos para começar. Obrigado por mais essa aula.
NIce setup.
nice 👌
The Ugreen HDMI capture card to UBC is the best from my experience, it just works compared to other
For the multimeter I use a combined multimeter + power supply, that I can connect to the PC by USB and so display everything on the software in the PC
Yeah that works too. Sorin at Electronics Repair School does something similar. I went with my solution as it fitted in well with the way I work, more than for any other reason.
Hi Richard 🤗🤗
You forgot the most important point of all. 😱
What kind of coffee machine you use and what you need😭😭.
Thanks for your Video 👏🖖🤗
Evian Water doesn't need any machine.
Coffee? Actually I don't drink that 🙂
@@LearnElectronicsRepair how dare you ? 😱😱😱😭😭😭😳😳😳🤣🤣🤣🤣.
Wow. Interesting but complex setup
It wasn't built that way it just evolved that way. Everyone's solution would be different but I believe this video gives a good guideline on how to go about it. Bear in mind I had no prior experience in this field
Well as a viewer I would say it's a good setup - your videos work very well.
Quick question, how long do you spend editing the video? And for this one for example, how much did you shoot?
Yeah it depends, but I don't do much editing, I keep the content real and just cut out the gaps. I would say I can edit a 30 mins video in 60 minutes
Really interesting to see how you’ve set yours all up, thank you. I’ve gathered a couple of cheap cameras and a Elgatto card, bought an hdmi microscope and had a few dry runs of doing some repairs on camera but the quality has been so poor I’ve not bothered uploading them. Only thing I have uploaded has been set to private for the last year as I haven’t had the confidence to post it and that’s just me an my son working on our car. I’ll post it now, you’ve kinda given me a nudge and you never know, people might be having trouble sleeping and might find it useful 😂
Go for it, my first published videos were filmed on my phone
I use Linux. OBS for capturing and Flowblade for editing.
Heya, I have a similair setup but whit half of camera's I olso use OBS but for editing I use power director 365 pack I pay about 100 euro for a year. I find edititing pretty challenging. having film for 2 or 3 hours and bringing it back to unther and hour or unther 30 minutes is a challance
thank you Sir for these video Tips. I've been trying to "improve" my general camera-functions and these tips will comne in Handy.
is there a surefire way to stay away from Dutch Angles?
thanks, -jason
ELP is a really good brand from my experience 😉
I think your setup works great for your video production. People often wonder how someones setup is. Me personally i feel everyone will eventually have there own individual setup. As every ones environment and condition is different. Every one will have to create there own comfort zone. Thanks again Richard!!! Excellent quality video an insight.
USED GPT-4 to READ CHINESE MANUAL and Equipment Labels from iPhone video ... I'm sure the rest of you have been doing this, but I took a video on my iPhone of a Chinese label that I needed to understand and screen-captured a still image from the video and cropped the image of the labels and then uploaded the images one at a time into GPT-4 and asked Chatgpt to tell me what they said in English. I later found the English version I had misplaced of the manual showing the labels in English and checked and GPT-4 had given me the correct translation. Have used it a few times to read some labels on some tools I have and their schematics. Also Data Sheets. So in a pinch when have something in the shop and need to know what it says GPt-4 will translate from a photo taken with iPhone.
Try Google Lens or similar, plenty of ways nowadays!
@@deedeelabricolade Thank you. I'll check out Google Lens. It's very helpful when rebuilding old vintage machines that have schematics inside but can't read the language. Wonder what tech they will have in 10 years from now.
G,day Richard from Sydney Australia. As a beginner, I'm interested in building a bank of ideas for an electronics lab.
There are some really exciting multifunctional (cheap) instruments through Vevor and Amazon. Some without the feature range e.g pF, Hz Frequency (handheld scopes) magnifying cameras.
🌏🇦🇺
Did you replace the guts of the desoldering gun? I was under the impression that the colour of the SS-331 and the gun denoted how many pins were in the connector
There are affiliate links to all the SS-331 spares in the video description
I just use a Pixel 3 phone with poor battery :D
The richrig
Logitech in tripod?
No it's a cheapo 1080 webcam from Aliexpress
hi a do find them I computers very slow i had help with AMD 4 computer gov start up they played 50% of the rig
they are alot of old computers old there i have a computer with a olt tape drive on note if the computer is not working right the tape drive softwear will tell
you nova back up has alot of tools in it note it can run all the makes of drive note you can tell the drive to look for any kind of data back up
done on any tape drive i have 40 tape drive that are working 100% all because the sellers on ebay did not know what they are doing
Hello Richard,
First of all, you don't have the Observer (Control) in the back of you, so the the work banch is not complete 😂.
Zweitens haben Sie au der linken Seite kein Det und auch ist die Werkbank unvollständing 🤣🍻.
Third, many times, in the afternoon, I felt aslep a little while watching the videos, so your "beautiful voice" really works.
Just joking.
I really like your videos. ❤
hi can see now why some have very low audio levels snd i am all ways turn up the vol when making video's check the level i have obs
some will let you change the audio up the gain on the levels some do'n't i have watch you video you have a safe set up
there one i will not say who he is
is one is going to have gear coming down on him and the insur will not cover him there is fine print in the insur beware of this
and you don't have to show you face at all best not to there alot of evil trolls out there and like me ihave to use a voice changer now i sound like a man with a bad cold all the time so please be carefull start up a channel
Using decent Mic and DJ mixer along with an audio compressor (hardware or software) then using noise reduction in post editing is the key to good audio. And I have tried quite a few other setups before I got to this one.
Agreed, the lighting and camera above the bench are on 2x1 wooden batten and a 1x1 steel square section tube respectively. The steel square section is clamped to the shelving either side of the bench using G clamps. The wooden batten for the lighting is moveable backwards and forwards but too long to ever be able to fall off the shelving no matter what you did with it
Show your face, I mean would you walk into a bar or club or down the beach with a box over your head? Use you own voice, what can Trolls possibly do to you anyway, I don't give a f#ck, they are welcome to their opinion but it wouldn't bother me what anyone thinks. Anyway I turn into a wolf at full moon so the trolls better beware 🤣 👹