Thanks for the informatiom i have been struggling trying to update my software from garmin express and it gets about half way through and then shows error but your update worked like a charm. thanks again I'm one of those senior adults that did not grow up with a computer
A big thank you for great job on explaning the downloading proceedure..for 3 days i've been fighting this download and watching your video showed me exactly what i was doing wrong..WAS'NT EXTRACTING the file..thanks again..
Thanks so much for going over this! Getting ready to update my 2 units. Wondering, I have a 93sv and 73dv. Can I use the same card and update both units w/o redownloading the card from the computer a second time.
I guess that you do the 1242sxv the same way, Just got to figure out what update to put on a new unit. Thanks for the info. I am 75 years old and this is new to me.
Just a heads up- the process for downloading and putting the files on the SD card has changed slightly. The download is no longer the wizard that copies the files for you. It's a ZIP file that you have to extract yourself and manually copy the "Garmin" folder to the SD card. There's more detailed instructions on the download page.
Ive been watching your videos for some time now and really have got alot from them. I have a 3 yr old 93sv and ive decided to update it..questions..mine has a micro SD in it now. Do i use it or get a new one and save that..? Also ive read you must power up th black box during updating. Do i need to disable sonar? Was told not good to run out of water..thanks from e tex
I have a 74sv and trying to add lakevu g3 so I can see freshwater so I just bought a micro sd lakevu from garmin. Do I need to do this to the mircro sd card before adding it into my 74sv?
great video! I am very new to this and have a question for you...I recently bought a new 2022 boat and it has twin Garmin UHD 93SV units version 14.3 US Lakes but i will be going off the west coast of Florida. I do have the BlueChart G3 map for all us and western canada. My question is do I update the units first to the most up to date version and then insert the G3 maps or vice versa? Also do i update each unit individually or can I assume they are connected together and will update together if i just do 1 of them.
@@The_Garmin_Guru so I can do like your video and update the micro SD card to just get the latest version for the units and then put the G3 Blue chart SD card in to have the maps? The SD card used for the update is removed afte the updat or does it stay in the chart plotter? One with the update card and one with the map card?
Great video! Quick technical question - my 94SV that I just bought and installed recently is extremely laggy, slow, and pixelated when zooming navigation from one area to another. Like 15-30 seconds to render the new location. All firmware and chart updates are current. Navionics on my phone was FAR more snappy and responsive. Any ideas? Garmin support was, well, unsupportive. 🤷♂
That’s strange because there support is usually top notch. But the 94 has a single processor and if you have lots of data loaded it will slow down unfortunately. Gpsmap series are much faster
@@The_Garmin_Guru Thanks for the reply. There's almost nothing stored on it. Just came out of the box last week. Only the updates. Appreciate it though. 👍
I just installed a 126SV a few weeks ago. I am going to purchase a 93SV this week and need to know weather I can use the card I used for my 126SV for the new one to update the software ? Thanks
I loaded the Garmin express app to my computer then take a blank card plug into your unit plug it into the computer then open express and hit add a device it will transfer your unit into then when there’s a update it will show it plug in a blank card upload quick and easier for me instead of stepping through Garmin’s page.
Have you looked at this process lately? I just followed along and whenever I select download under Echomap page it goes back to the original screen at 3:14 in your video. I ma trying to get from 19.20 to 20.00 on my 106SV and from 2.57 to 2.58 on my GLS10 and my Active captain and Garmin Express is not showing either upgrade available? Hoping you see this comment and have some insight. I have done multiple upgrades over the years and have never had this issue. Thanks!
having a problem after the purchase of used boat with Garmin Live Scope. It keeps saying registered to another person. Have Active Captain thru my apple phone. yet nothing will bluetooth. have a SD card in the 93. Any help or how to call someone in walking thru the steps. thanks.
So I have two 122SV's (Version 13.20) and then one 126SV (Version 17.10). Based on your tutorial it appears the software download would be the same for all three. Once I download my SD card, I can update all three in one shot without having to download the update on the SD card 3 times, correct? That being said I believe my 122SV's are linked, so they may both download at the same time. For Active Cast and Livescope, do those require updates as well? Sorry for all the questions, new to Garmin. Thank you sir!
Yes you can use the same card to update all with the same card. With the ones that are linked as long as both are powered up it will update both at the same time. As long as the black box is powered up and connected up it will update also
Just got my unit Gpsmap1022 ... Do I need to down load all updates or is there certain ones to do ... That are more app for what is needed .... Thank you
Is there a update for the black box as well? If so is it within this update? if not can you download both updates to the same card before putting in the unit?
My laptop computer must be setup different. The wizard doesn’t pop up. I’ve manually downloaded and followed the directions and when I insert the sd card the unit doesn’t show any updates on tue card.
Is this the latest software update or just update on mapping? I just did the software 2 days ago and am wondering if this was part of the update of if it is a separate update for maps. If this was for both then I just leave the SD card in and maps are updated?
Couple questions. I bought my 93sv from someone who never updated it. It’s at version 16.10. I also have the Panoptix system and am unsure what software is on the black box. My questions: do I still need to format the sd card if it is a blank, brand new out of the box SD card? 2, do I leave my black box connected via Ethernet hub during the update or do I disconnect it?
I got to the point of extracting the info , but mine didn’t show the downloading the extracting like yours did, and I never saw the Wizard . Any ideas where I could have gone wrong?
I'm trying to upload the newest software updates of my ECHOMAP 74cv using Garmin Express. I put my Garmin SD card in my computer and open Express. I get a warning that says \"Do not use Garmin Map Card. This process will reformat the card and erase all of it's current data." Do I need to get a new blank SD card and run the update onto that and then upload it into my GPS? Sorry man, I'm not the brightest bulb in the pack when it comes to this stuff.
I didn’t see anything about this here…. And some people have separate/disconnected power to there black box… So when updating off water in your garage, etc., Garmin told me to make sure black box has power and is connected to your display unit, transducer connection is not necessary for update…. From Garmin Support. ??
There is a new method. See attached video. Garmin Livescope Update: How To Download New Update To A SD Card and The Heavy Hitters Winner ua-cam.com/video/XJqi_6mw2xM/v-deo.html
@@The_Garmin_Guru I had a guy on my boat on monday and he showed me some things, but the weather went crappy. So I'll try what we learned from him and go from there. Hope your ok with the scary weather down your way. Believe it or not I was thinking of you, when I heard about the tornadoes. God Speed to all those affected.
I live in longbeach Mississippi .bass fisherman . Anybody close by who would help a 67 year old man with a little hands on update . I have a 93 -a 106 and live scope . I need help please .I’m on the ms coast . Longbeach ms
@@The_Garmin_Guru I could never get the chartplotter to work but I bought the 93sv that was supposed to come pre installed. So after a year of mess around with it, I bought a Garmin maps SD card thinking well maybe this will work. Still doesn't. I got a friend that's supposed to take a look at it and then I was going to call Garmin support.
@@The_Garmin_Guru hey. When i download the updates then put the card into my 126sv unit, the Promted screen pops up but only says manage user data, copy built in map, and create active captain memory card.. it doesnt say anything about the software update.
Thank you from all us old guys! Finally someone who understands we need step by step instructions.
I had. Tons of step by step guides in my video library
Finally an update vid for those of us that arent tech heads...yah Im an old guy lol
Thank you yall are our greatest generation
Thanks for the informatiom i have been struggling trying to update my software from garmin express and it gets about half way through and then shows error but your update worked like a charm. thanks again I'm one of those senior adults that did not grow up with a computer
That’s awesome bud. Y’all are our greatest generation
A big thank you for great job on explaning the downloading proceedure..for 3 days i've been fighting this download and watching your video showed me exactly what i was doing wrong..WAS'NT EXTRACTING the file..thanks again..
Yes sir. Glad I could help
Once again, you did an AWESOME job of explaining AND showing the details. I'm going to send you a PM on FB with a few questions about updating.
Yes sir. Message away.
Thanks so much for going over this! Getting ready to update my 2 units. Wondering, I have a 93sv and 73dv. Can I use the same card and update both units w/o redownloading the card from the computer a second time.
Yes sir you can
Literally doing my Initial setup and updates today on my 73sv and 93sv. Thanks for the info 👍🏻👍🏻
Awesome. Any questions
Feel free to message me at any time
I guess that you do the 1242sxv the same way, Just got to figure out what update to put on a new unit. Thanks for the info. I am 75 years old and this is new to me.
Email me if you need help bud
@@The_Garmin_Guru Thanks very much.
Great 👍 video for us older guys, keep them coming
Awesome. Glad I could help bud
Just a heads up- the process for downloading and putting the files on the SD card has changed slightly. The download is no longer the wizard that copies the files for you. It's a ZIP file that you have to extract yourself and manually copy the "Garmin" folder to the SD card. There's more detailed instructions on the download page.
I have a more recent video posted. But this video is still relevant if you have older software updates still on your computer
Ive been watching your videos for some time now and really have got alot from them. I have a 3 yr old 93sv and ive decided to update it..questions..mine has a micro SD in it now. Do i use it or get a new one and save that..? Also ive read you must power up th black box during updating. Do i need to disable sonar? Was told not good to run out of water..thanks from e tex
I have a 74sv and trying to add lakevu g3 so I can see freshwater so I just bought a micro sd lakevu from garmin. Do I need to do this to the mircro sd card before adding it into my 74sv?
Will it erase all data on the card currently in my unit if I use that same card? Or do I have to get a new card?
It won’t erase any data on your card
Enjoying your video. And im looking at my format. It only has exfat. No fat32. Is that ok. Appreciate all your help
It had to be fat32 for the fishfinder to recognize it. Most pc have that option.
@@The_Garmin_Guru thank you for the info. I appreciated
Very helpful,thank you much.
You are welcome!
great video! I am very new to this and have a question for you...I recently bought a new 2022 boat and it has twin Garmin UHD 93SV units version 14.3 US Lakes but i will be going off the west coast of Florida. I do have the BlueChart G3 map for all us and western canada. My question is do I update the units first to the most up to date version and then insert the G3 maps or vice versa? Also do i update each unit individually or can I assume they are connected together and will update together if i just do 1 of them.
It’s time for an update. If they are both networked together and powered up they will update one right after the other bud.
@@The_Garmin_Guru so I can do like your video and update the micro SD card to just get the latest version for the units and then put the G3 Blue chart SD card in to have the maps? The SD card used for the update is removed afte the updat or does it stay in the chart plotter? One with the update card and one with the map card?
Great video! Quick technical question - my 94SV that I just bought and installed recently is extremely laggy, slow, and pixelated when zooming navigation from one area to another. Like 15-30 seconds to render the new location. All firmware and chart updates are current. Navionics on my phone was FAR more snappy and responsive. Any ideas? Garmin support was, well, unsupportive. 🤷♂
That’s strange because there support is usually top notch. But the 94 has a single processor and if you have lots of data loaded it will slow down unfortunately. Gpsmap series are much faster
@@The_Garmin_Guru Thanks for the reply. There's almost nothing stored on it. Just came out of the box last week. Only the updates. Appreciate it though. 👍
@@kenossowicz1280 the smaller echomaps tend to be slower
I just installed a 126SV a few weeks ago. I am going to purchase a 93SV this week and need to know weather I can use the card I used for my 126SV for the new one to update the software ? Thanks
You can
@@The_Garmin_Guru So I can just put it in the unit and it will update automatically? Thanks for your help !!
@@bill-qv3er if they are networked together I will do both at the same time
@@The_Garmin_Guru Thank you sir !!
I loaded the Garmin express app to my computer then take a blank card plug into your unit plug it into the computer then open express and hit add a device it will transfer your unit into then when there’s a update it will show it plug in a blank card upload quick and easier for me instead of stepping through Garmin’s page.
Nice to know.
Can you use the same card again with the old updates on it or do you have to erase the old update before downloading the newest updates?
I would erase it. The old update will still be on your computer if you feel the need to go backwards
Have you looked at this process lately? I just followed along and whenever I select download under Echomap page it goes back to the original screen at 3:14 in your video. I ma trying to get from 19.20 to 20.00 on my 106SV and from 2.57 to 2.58 on my GLS10 and my Active captain and Garmin Express is not showing either upgrade available? Hoping you see this comment and have some insight. I have done multiple upgrades over the years and have never had this issue. Thanks!
After talking to Garmin there servers are down as of right now
@@The_Garmin_Guru Thank you!
What type of sd card should I buy. Like GB's and all that? TIA
Any brand 16gb will do. Always format to fat32
I just bought a UHD 93sv and haven’t even turned it on yet. Will I need to ubdate it as soon as I hook it up or should it be good to go?
Depends on when it was made
@@The_Garmin_Guruok thanks. I don’t know when it was made. I should be able to check for updates.
How did you powered the unit outside of the vessel?
I don’t really understand what you’re asking
I think yours was connected to the boat. I mean if you need to use it in an office for example.
@@2000masf a 12 volt battery
having a problem after the purchase of used boat with Garmin Live Scope. It keeps saying registered to another person. Have Active Captain thru my apple phone. yet nothing will bluetooth. have a SD card in the 93. Any help or how to call someone in walking thru the steps. thanks.
You’ll have to get the previous owner to delete it from their active Captain if that’s not possible then you’ll have to call Garmin.
Good info old man, thx, Kentucky
Thank you sir
If you have 2 units that are not linked can you use the same card two update both units
Yes you can as long as they are the same family group
My unit is currently multiple updates behind. Would I need to install each individual update or could I just install the most recent one? Thanks.
The most recent will get you current.
So I have two 122SV's (Version 13.20) and then one 126SV (Version 17.10). Based on your tutorial it appears the software download would be the same for all three. Once I download my SD card, I can update all three in one shot without having to download the update on the SD card 3 times, correct? That being said I believe my 122SV's are linked, so they may both download at the same time. For Active Cast and Livescope, do those require updates as well? Sorry for all the questions, new to Garmin. Thank you sir!
Yes you can use the same card to update all with the same card. With the ones that are linked as long as both are powered up it will update both at the same time. As long as the black box is powered up and connected up it will update also
When turning unit on to do the update should we turn off the transducer because it’s not in water?
No it’s not gonna hurt it for that short amount of time.
Just got my unit Gpsmap1022 ... Do I need to down load all updates or is there certain ones to do ... That are more app for what is needed .... Thank you
Each family series has a particular download. For your unit it will be software update 26.2
@@The_Garmin_Guru thank you very much 👍🎣
Is there a update for the black box as well? If so is it within this update? if not can you download both updates to the same card before putting in the unit?
Yes sir it’s within the update for the unit. As long as the black box has power and is connected to the unit it will update also
@@The_Garmin_Guru Thanks!!! Keep up the hard work. My new favorite channel!
I got a card in the mail from Farmington do I still need to format it and download off the website
I’m assuming you meant Garmin. If you format it then it will erase it. Turn on your unit and insert it. Follow the onscreen instructions
My laptop computer must be setup different. The wizard doesn’t pop up. I’ve manually downloaded and followed the directions and when I insert the sd card the unit doesn’t show any updates on tue card.
Brother that’s the old one. I’m gonna post the new updated how to updating your units.
ua-cam.com/video/XJqi_6mw2xM/v-deo.html
So to the guys who have unit on boat just put a bucket of water under the transducer?
Why?
Can you update multiple units with the same sd card without downloading again?
Yes sir you can
Hey man . After doing updates so I need to rest sonar defaults ?
Yes sir
Is this the latest software update or just update on mapping? I just did the software 2 days ago and am wondering if this was part of the update of if it is a separate update for maps. If this was for both then I just leave the SD card in and maps are updated?
Echomaps is the series bud.
So I just leave the SD card plugged in now or does it matter?
Couple questions. I bought my 93sv from someone who never updated it. It’s at version 16.10. I also have the Panoptix system and am unsure what software is on the black box. My questions: do I still need to format the sd card if it is a blank, brand new out of the box SD card? 2, do I leave my black box connected via Ethernet hub during the update or do I disconnect it?
When you update to the new version it will update your black box also to the current version. Leave it connected and it will update everything.
@@The_Garmin_Guru YES FORMAT THE SD CARD TO FAT32,ANYWAY.THAT WAY ITS RIGHT.😎 MICK
I got to the point of extracting the info , but mine didn’t show the downloading the extracting like yours did, and I never saw the Wizard . Any ideas where I could have gone wrong?
This is the old way. There is a new method now
ua-cam.com/video/XJqi_6mw2xM/v-deo.html
Can I update my 1022? I'm lost with the updates and the difference of unit types.
Watch this
ua-cam.com/video/XJqi_6mw2xM/v-deo.html
Will the LVS 34 Work with the 126sv?
THANKS CHRIS
Yes sir it will.
@@The_Garmin_Guru Thanks a lot!
I have been using ActiveCaptain to update my units without any problems. What’s the difference?
It’s real glitchy. Most everyone that went back and reinstalled with a card reported better quality images
If you have your units connected with a GMS10 do you have to update each unit ?
No sir it should update each unit one at a time once it finishes each unit
I'm new to live scope, I have 1022 gps maps. I did not update the new version, but my question is can I download to a card navionics US maps?
I’ll need to check on that bud. Not real familiar with all the new mapping and stufg
@@The_Garmin_Guru thanks just let me know....
Great video thank you!
Thanks for watching bud
Do you have to remove Sim card after update,or leave it in
You can remove it or leave it in
I'm trying to upload the newest software updates of my ECHOMAP 74cv using Garmin Express. I put my Garmin SD card in my computer and open Express. I get a warning that says \"Do not use Garmin Map Card. This process will reformat the card and erase all of it's current data." Do I need to get a new blank SD card and run the update onto that and then upload it into my GPS? Sorry man, I'm not the brightest bulb in the pack when it comes to this stuff.
I would def get a new card if you didn’t want to lose the data on your card just for safety sake.
I’m sure it was good for them. Kentucky
Yes sir.
Will this work with the echomap 73sv? The discontinued version?
If there is an update available it’s the same steps
I didn’t see anything about this here…. And some people have separate/disconnected power to there black box… So when updating off water in your garage, etc., Garmin told me to make sure black box has power and is connected to your display unit, transducer connection is not necessary for update…. From Garmin Support. ??
I don’t guess it’s absolutely necessary but just wondering why it would be disconnected in the first place
You might be surprised at how many fisherman turn off all their electronics when off the water as they worry about battery drain…
When I say “turn off” I mean disconnect, unplug, etc.
My garmin doesn’t even read that there’s in SD card in it… any way to fix it?
Usually if that happens it’s downloaded onto the card properly.
I downloaded the file, but can't find the set up wizard despite downloading the same file, what do I do?
There is a new method. See attached video.
Garmin Livescope Update: How To Download New Update To A SD Card and The Heavy Hitters Winner
ua-cam.com/video/XJqi_6mw2xM/v-deo.html
Good job . Probably the dumbest guy watching . That helps a lot .updating today I hope .
where is the set up wizard
It’s no longer there. Lots easier now
@@The_Garmin_Guru so all you do is extract the file to the SD card?
Yup that's me, the old dude, that wants to throw his sht overboard!
No sir. Feel free to message me at anytime and we will get you figured out.
@@The_Garmin_Guru I had a guy on my boat on monday and he showed me some things, but the weather went crappy. So I'll try what we learned from him and go from there. Hope your ok with the scary weather down your way. Believe it or not I was thinking of you, when I heard about the tornadoes. God Speed to all those affected.
@@jeffreyriddle4645 thank you bud that means a lot. Good luck and if you need help you can message me.
I live in longbeach Mississippi .bass fisherman . Anybody close by who would help a 67 year old man with a little hands on update . I have a 93 -a 106 and live scope . I need help please .I’m on the ms coast . Longbeach ms
This is just too much bs. Wish I had never wasted the money on this fish finder/ chartplotter
Why do you say that. Message me back and I can help you.
@@The_Garmin_Guru I could never get the chartplotter to work but I bought the 93sv that was supposed to come pre installed. So after a year of mess around with it, I bought a Garmin maps SD card thinking well maybe this will work. Still doesn't. I got a friend that's supposed to take a look at it and then I was going to call Garmin support.
@@The_Garmin_Guru hey. When i download the updates then put the card into my 126sv unit, the Promted screen pops up but only says manage user data, copy built in map, and create active captain memory card.. it doesnt say anything about the software update.
@@JoeHousel which updates bud
@@The_Garmin_Guru i believe its the 2024.1002.0. I am a few updated behind.