This video has a lot of good information, the walkthrough on how to actually use the program and showing what the different parts are meant is a huge help. I am getting toward the end of a build on a 2000 trans am that i am putting a supercharged LQ4 based 408, i was looking at the costs of getting it running since im not sure the stock LQ4 tune would work or if it would damage the engine. The quotes i was being given were anywhere between $700-1,200, and since i want to make several changes that will definitely need another solid dyno tune for, i decided to look into the costs and difficulty in tuning my own cars.
You know how to use the file comparison tree view? By far the fastest way to see any and all differences and be able to copy complex tables in one click, great overview, green screen is no bother
I have not used that actually. I'll have to give it a look. Appreciate the green screen feedback. I thought for sure it would cause a comment section meltdown. Maybe my excuse to finally switch to Vegas. Lol.
I have a Datsun 280ZX had a small block 406 upgrading to the lq4 6L I think this definitely is going to help me get started tuning thanks for going into depth on the options 2 Hp tuner little easier to understand than some of these other guys that talk too fast and don't explain exactly what they're doing
I'm glad you made this video I've been on the fence for a while about buying it and I think I'm gonna take the plunge now, keep up the good work I can't wait to see the next video!
Good stuff. Keep em comin. Bought me a micro this week with Tuner Studio Ultra and Megalog viewer so any and all tuning videos I watch with great interest.
Great video! just finished watching this and probably will go over it a few more times. I’m interested in learning this stuff I’m currently swapping a TBSS ls2 into a third gen Fbody maybe this will help, At least I could use this to disable vats for starters. Thanks for making this
Hey love the videos. any way you could help a newbie? I have a 5.3 in a 2002 S10 and I'm new to tuning. I've only changed cam and springs so looking for advice on making it safe and not sure we're to start. Any info would be appreciated. Thks
great video love the information with the fundamentals hptuners, wish i saw this earlier! and one thing with such a long video you should go through it and make a table of contents in the description so if someone needs to reference back to it one day they can find a spot about lets say map sensor characteristics or something for example just some advice for future vids man.
i would love to see you do a video on how to real time tune injectors that didn't come with the needed data, i have accel 36# (150136) injectors that didn't come with much information: Drive Circuit: "Saturated", R-C Voltage Suppression, 14.0 VDC Coil Resistance: 14.5 ohms Fuel Compatibility: Standard Gasolines and Ethanol Flex Fuels Fuel Pressure: 300 kPa (43.5 psi) Static Flow Rate: 252 gm/min n-Heptane Dynamic Flow Rate: 7.56 mg/pulse at 2.5 ms, 10 ms period (100 Hz) Approximated Time Offset: 0.70 ms Approximated Slope: 4.20 mg/ms Minimum Linear PW: 1.38 ms Linear Flow Range (SAE): 15.3 Opening Time: 1.35 ms Closing Time 0.67 ms SMOV: 4.23 volts not sure i can give the ecm the needed injector data from what you see above, what are your thoughts on this?
I Apologize in Advance for the green screen at transition points. I spent a couple hours trying to remove it but no luck. May try a different editing software for screen capture.
What software are you using to screen capture now? I'd like to be able to do videos like these but that green screen is distracting lol I appreciate you going through this software to walk me through what is what. I'm used to aftermarket ECUs so this is just getting used to the software display and its strategies.
Hi a21bravo, good video. I just need to send my tuner a copy of my current car file so he can tune it. I’m already running a previous HP tune. I have the mvpi 1. How do I use that to retrieve the car file, copy, save and send?. I don’t need to dink around with anything just copy save and send. I’ve never used this stuff myself before. Thanks
Hello a21bravo...I know it's been a while since you made this vid; but at about time 53 min where you are playing back a saved Log File, the Accelerator Pedal Position does not change from 0% on the Channel List value throughout the log. I am having similar problems with PIDs that don't record or worse yet when it does record in the Channel List Values and then using the same Channel List on another Log, it does not record. Do you know what is going on and what I need to do to correct the problem. Thanks...this is the best video I have seen on HPT Scanner/Editor and definitely the most comprehensive.
Soo when i went to tune for longtube headers for my friends 2017 mustang gt, where would i go for that?? Im still having some issues , with forums or depository
Great video bro😉😉 i been looking for more info on the wideband wired to the ac pinout but haven’t have any luck 😖😖 i was wondering if you can help me out 🤔🤔
A21bravo, appreciate the time you took to make this video. Question Just bought hp tuners aslong as i have credits can i read and write ecm without internet connection? Thanks
Does HP tuner have the capability of changing parameters that will cancel the Fuel System Control Module call for MIL illumination, a Trouble code showing up on the dash. Working on a 2009 Silverado and changed everything including fuel pressure sensor, FSCM, fuel pump and still get trouble code. The truck runs perfect as it did before I changed everything including ground and wiring check.
@a21bravo Off topic question. I have to bay better scanner ($150-200) to program/relearn Crankshaft position sensor. I have LS-edit. My first experience to reprogram 5.3L was cost me an engine (road throw the block). I not able to make LS-Edit to work with Win7 and Win10. I planning to purchase HP Tuner. Can I use HP tuner program/relearn Crankshaft position sensor?
Yes, there are some special instructions that pop up when doing the conversion. Mainly using the "save as" function, saving as a new file, then using the "write entire" function for the first write of the new file.
I’m using a Lenovo think pad and tried it on my acer computer and I can’t pull up the vcm editor or scanner, what am I doing wrong? I installed vcm suite. I’m using mpvi 2plus
whats up dude! i love watching your videos! i got a 5.3l turbo ranger also, do you happen to know what setting to use to get the factory tachometer output to read right? right now i have high resolution 3 and low 3 but its off by 1k rpms.
I have a question pretaining to this and changing some parameters, is there a better way to contact you, so that I can explain to you in full detail with my question?
How do you go about doing say, OS upgrade, VATS delete, and segment swap? Can you do it all at once and just write entire 1 time or is there a particular order you must do them in?
So, question I have 8 gm trucks and suvs 1999-2007classic what would be my best option to be able to work on them all? 1999z71 1999 2500hd 2001 yukon 2003 suburban 2003 z71 2004 3500hd 2005 ss silverado 2007 2500 hd
Getting ready to tune my first car soon. As far as licensing goes I don't want to waste any credits but I have a p59 with IAC. The os is drive by wire currently. I'm a little confused on the best way to get a base tune without wasting credits, would the simplest way be to buy my ecm vin and one of sloppys flex/ 3 bar sd tunes and then shut off the trans segment (running th400)
Tuned my 97 GMC 454 with a hypertech programmer... have Volant cai, Jet MAF, Flowmasters...very easy to tune and update....HP tuners is not for basic tunes....essentially for shops, weekend and regular racers. A class for tuning....multiple classes...videos etc.... got this to tune a 12 caprice and 09 tahoe....feel like i have to train for 6 months first 😳😵🤦
I appreciate the video, a21bravo! I am on the fence of purchasing the HPtuner & credits. My current set up is a bone stock and high mileage GMC Envoy SLT with the 4.2. I want to use that as a starter for gaining fuel efficiency and/or power before diving into a separate project car I want to LS swap. My intent is to daily the Envoy and make very marginal changes. The bigger goal is to learn the HPtuner front to back. The Envoy is well kept and in great work order with no SEL lights. Any advice on which direction I should go to learn the software? Whether it be more youtube, or parameters to dabble in first? Thanks! Ted
a21bravo I licensed my camaro 4 credits , then I sent the base tune to my tuner, did I essentially waste 4 credits, should of I waited for my tuner to send back the tune then used my 4 credits, I think I did it backwards, Someone told me I should of sent him the base tune using no credits, then when my tuner sent back the tune i should of selected “write vechile” then used the 4 credits
can someone actually tune your chip and they live another state and cant up the obd1 up and see the reading they just going by the information you gave them of what you got in your car...i would think its hard to get the chip burn correctly especially the frist time..the reason i ask you that because im having that problem now..
So right now ive got a 2002 Mustang gt N/A. ive got a Vortech v3 kit with power pipe i will be installing soon and im really on the fence. i bought a Moates Quarterhorse and Binary Editor and im just having trouble getting it to work im sure its probably user error and theres just not a lot of support. so its either pay the tuner at the speed shop $500 for a dyno tune or go with the HP tuners. Its tough because love the thought of doing it myself and not having to pay someone.
Really depends how much time you're willing to spend on it, and what risk you're willing to accept. If a lot of time and possible broken parts are an issue the tuner may be the best option. If that's not and issue, or you change parts/upgrade a lot, tuning yourself is worth it in the long run.
Very nice man.... I'm not good at tuning... feel free to build me one for my LS 6.0 WITH LJMS STAGE 2 TURBO CAM holley high rise intake 80 lb injectors 102 mm throttle body... lol😁😁
Has anyone here used hptuners on ford cars? I ended up using sct for my 2.3t ranger because i couldn't find any ford/hptuner reviews, might still try it some day.
I just don’t understand.. this cost just as much as to get the ECU FLUSHED by a professional, you got more chance to screw things up and more things to worry about , more reading and understanding... why don’t just go to a professional team and make a great tuning with a hard disk of backup to go back to stock ?? You can also get a better increase of HP in this way..
Depends on the person. If you're going to build something once, and never touch it again, id recommend taking it to someone. Since I bought this, I've done 3 ECU's. Once of the ECU's I've flashed hundreds of times because I've changed turbo, injectors, exhaust, added methanol, changed fuel pressure, season changes, increased boost level etc. How many times have you watched someone on a video dyno their car and say "I'm running out of injector, I'll have to come back"... They're now buying new injectors and spending another $400-$600 to get it re-tuned. Depends on the person. I take my stuff to the track so I'm constantly changing things.
a21bravo k i see , this is stuff for people that keep on modifying their vehicle.. but if you don’t crave so much and keep you limit to a CAI and exaust, and as per my case now considering some extra power..would you still suggest that ?
@@Italianborn Might need a a light tune for that, but not worth buying the software. Unless you're really wanting to understand how everything works... I bought it knowing full well that I was going to break stuff (which I have). But pulling the motor, rebuilding the trans etc. doesn't bother me. But it's not for everyone.
a21bravo so i might be better to stick around a diablosport intune i3 or something like that ? Sorry for bugging you but i have a Ram 1500 v6 and not all the tuning works on my engine..
This video has a lot of good information, the walkthrough on how to actually use the program and showing what the different parts are meant is a huge help. I am getting toward the end of a build on a 2000 trans am that i am putting a supercharged LQ4 based 408, i was looking at the costs of getting it running since im not sure the stock LQ4 tune would work or if it would damage the engine. The quotes i was being given were anywhere between $700-1,200, and since i want to make several changes that will definitely need another solid dyno tune for, i decided to look into the costs and difficulty in tuning my own cars.
You know how to use the file comparison tree view? By far the fastest way to see any and all differences and be able to copy complex tables in one click, great overview, green screen is no bother
I have not used that actually. I'll have to give it a look. Appreciate the green screen feedback. I thought for sure it would cause a comment section meltdown. Maybe my excuse to finally switch to Vegas. Lol.
I have a Datsun 280ZX had a small block 406 upgrading to the lq4 6L I think this definitely is going to help me get started tuning thanks for going into depth on the options 2 Hp tuner little easier to understand than some of these other guys that talk too fast and don't explain exactly what they're doing
I'm glad you made this video I've been on the fence for a while about buying it and I think I'm gonna take the plunge now, keep up the good work I can't wait to see the next video!
Another great tuning HP tuner video, thanks!
Just got delivered my hp tuners today! Thanks for the well explained video
Just picked one up today. I want to become a tuner when I grow up😂 my first victim is my 2007 impala ss.
Bravo! I'm a tuna now!! Watch out world!! But for real, great overview, keep them coming. I picked up quite a bit in this one !
Same as you
Good stuff. Keep em comin.
Bought me a micro this week with Tuner Studio Ultra and Megalog viewer so any and all tuning videos I watch with great interest.
Best info ever i did get about turning.
Thank you very much
Excellent run through, thank you 😊
Great video!
just finished watching this and probably will go over it a few more times. I’m interested in learning this stuff I’m currently swapping a TBSS ls2 into a third gen Fbody maybe this will help, At least I could use this to disable vats for starters.
Thanks for making this
I seen you an delete egr can you delete downstream O2's? Thanks great video
Hey love the videos. any way you could help a newbie? I have a 5.3 in a 2002 S10 and I'm new to tuning. I've only changed cam and springs so looking for advice on making it safe and not sure we're to start. Any info would be appreciated. Thks
I was going to suggest this the other day when you asked ideas. You read my mind, yer a wizard harry. Lol
Was the green screen thing an issue? I'm trying to find a way to remake it without that.
@@BlaserBuilds no issue, wouldn't even have noticed it if you hadn't posted about it
a21bravo not even a little
Big thanks for posting this!
Thanks dude! This is like the only good vid on how hp tuners works 😂
Thanks.
great video love the information with the fundamentals hptuners, wish i saw this earlier! and one thing with such a long video you should go through it and make a table of contents in the description so if someone needs to reference back to it one day they can find a spot about lets say map sensor characteristics or something for example just some advice for future vids man.
Not a bad idea! I did that with my transmission rebuild video, but that was a 2.5 hour video... I may do that, thanks.
Anxiously waiting for mine to get delivered so I can make some changes to my DTS and play with my Bonneville SSEi.
Awesome video! Thanks
Very good info thank you sir
great video thank you kindly for the video I learned a lot
Awsome info just awsome!!!
Thanks for the sharing, best regards of México
I Love the File .hpt " Fucking Piece of shit is a damn piece of sh..." :-)) 13:13
Great info man!!!
Best ever seen...... for me as junior...LQQking for more same ..GOOD LUCK
Great information .
Thank you. Good info.
i would love to see you do a video on how to real time tune injectors that didn't come with the needed data, i have accel 36# (150136) injectors that didn't come with much information:
Drive Circuit: "Saturated", R-C Voltage Suppression, 14.0 VDC
Coil Resistance: 14.5 ohms
Fuel Compatibility: Standard Gasolines and Ethanol Flex Fuels
Fuel Pressure: 300 kPa (43.5 psi)
Static Flow Rate: 252 gm/min n-Heptane
Dynamic Flow Rate: 7.56 mg/pulse at 2.5 ms, 10 ms period (100 Hz)
Approximated Time Offset: 0.70 ms
Approximated Slope: 4.20 mg/ms
Minimum Linear PW: 1.38 ms
Linear Flow Range (SAE): 15.3
Opening Time: 1.35 ms
Closing Time 0.67 ms
SMOV: 4.23 volts
not sure i can give the ecm the needed injector data from what you see above, what are your thoughts on this?
I Apologize in Advance for the green screen at transition points. I spent a couple hours trying to remove it but no luck. May try a different editing software for screen capture.
Do you have to buy credits for turning off anti theft systems
What software are you using to screen capture now? I'd like to be able to do videos like these but that green screen is distracting lol I appreciate you going through this software to walk me through what is what. I'm used to aftermarket ECUs so this is just getting used to the software display and its strategies.
@@TheProPilot OBS. What I do now is render the unedited clips into its own video, then edit that one. Then it doesn't do the green screen after cuts.
Hi a21bravo, good video. I just need to send my tuner a copy of my current car file so he can tune it. I’m already running a previous HP tune. I have the mvpi 1. How do I use that to retrieve the car file, copy, save and send?. I don’t need to dink around with anything just copy save and send. I’ve never used this stuff myself before. Thanks
What can cause mafs not givnig a good signal? Brand new GM MAFS
Hello a21bravo...I know it's been a while since you made this vid; but at about time 53 min where you are playing back a saved Log File, the Accelerator Pedal Position does not change from 0% on the Channel List value throughout the log. I am having similar problems with PIDs that don't record or worse yet when it does record in the Channel List Values and then using the same Channel List on another Log, it does not record. Do you know what is going on and what I need to do to correct the problem. Thanks...this is the best video I have seen on HPT Scanner/Editor and definitely the most comprehensive.
Have looked at TorquePro yet?
So...what did I learn about watching this?.... That I know well enough to leave it alone because I understood about 5% of what you were talking about.
can u show how to change a vin
Soo when i went to tune for longtube headers for my friends 2017 mustang gt, where would i go for that?? Im still having some issues , with forums or depository
Great video bro😉😉 i been looking for more info on the wideband wired to the ac pinout but haven’t have any luck 😖😖 i was wondering if you can help me out 🤔🤔
A21bravo, appreciate the time you took to make this video. Question Just bought hp tuners aslong as i have credits can i read and write ecm without internet connection? Thanks
good video my brother
Does HP tuner have the capability of changing parameters that will cancel the Fuel System Control Module
call for MIL illumination, a Trouble code showing up on the dash. Working on a 2009 Silverado and changed
everything including fuel pressure sensor, FSCM, fuel pump and still get trouble code. The truck runs perfect as it did before I changed everything including ground and wiring check.
@a21bravo Off topic question. I have to bay better scanner ($150-200) to program/relearn Crankshaft position sensor. I have LS-edit. My first experience to reprogram 5.3L was cost me an engine (road throw the block). I not able to make LS-Edit to work with Win7 and Win10.
I planning to purchase HP Tuner. Can I use HP tuner program/relearn Crankshaft position sensor?
Great Video. I'm still learning but this confirms I'm doing some shit right. haha
9:50 can you save a stock file and later write the stock file (unmodified) back to the ECM without using credits?
Awesome Video man. I Really appreciate it. Im getting ready to buy the MPV12. Do you know if the new MPVI2 will write and scan over bluetooth? Thx
Yeah it will do all of that. I heard the original versions had issues with logging wideband over Bluetooth, but I think they have that fixed now.
hi how are you. I like to lern to doo anti thef of in a ls ecm s what tools do I need for that? o how can I do it? thanks
If I switch operating system to speed density are there any special steps as to not brick my ecm?
Yes, there are some special instructions that pop up when doing the conversion. Mainly using the "save as" function, saving as a new file, then using the "write entire" function for the first write of the new file.
I’m using a Lenovo think pad and tried it on my acer computer and I can’t pull up the vcm editor or scanner, what am I doing wrong? I installed vcm suite. I’m using mpvi 2plus
whats up dude! i love watching your videos! i got a 5.3l turbo ranger also, do you happen to know what setting to use to get the factory tachometer output to read right? right now i have high resolution 3 and low 3 but its off by 1k rpms.
Mine is off a bit too... Reads high. I don't really use it enough to care, but may have to do with the resistance on the pullup circuit.
Good video need more of them actually learn something LOL
I have a question pretaining to this and changing some parameters, is there a better way to contact you, so that I can explain to you in full detail with my question?
How do you go about doing say, OS upgrade, VATS delete, and segment swap? Can you do it all at once and just write entire 1 time or is there a particular order you must do them in?
So, question I have 8 gm trucks and suvs
1999-2007classic what would be my best option to be able to work on them all?
1999z71
1999 2500hd
2001 yukon
2003 suburban
2003 z71
2004 3500hd
2005 ss silverado
2007 2500 hd
Getting ready to tune my first car soon. As far as licensing goes I don't want to waste any credits but I have a p59 with IAC. The os is drive by wire currently. I'm a little confused on the best way to get a base tune without wasting credits, would the simplest way be to buy my ecm vin and one of sloppys flex/ 3 bar sd tunes and then shut off the trans segment (running th400)
That's how I did mine for flex, licensed one of the tune cabinet files and wrote that...
Should have more views man
Good video man
Thanks.
So if i bought the mvpi1 used, I would need to buy the vcm software too?
Download off web site...
My friend have question some one make everything in my project tuned my pcm and my harness now motor dosen't turn on just turn on for few seconds.
Does it fire then die right away? Or does it actually run and struggle for a bit then die?
@@soychingon3324 Might need to turn off the VATS. That would be the fist thing to check.
Tuned my 97 GMC 454 with a hypertech programmer... have Volant cai, Jet MAF, Flowmasters...very easy to tune and update....HP tuners is not for basic tunes....essentially for shops, weekend and regular racers. A class for tuning....multiple classes...videos etc.... got this to tune a 12 caprice and 09 tahoe....feel like i have to train for 6 months first 😳😵🤦
What if you swap your engine does it cost more credits
The credits are tied to the VIN for the computer. If you keep same computer you don't need to use more credits.
@@BlaserBuilds thanks
I appreciate the video, a21bravo! I am on the fence of purchasing the HPtuner & credits. My current set up is a bone stock and high mileage GMC Envoy SLT with the 4.2. I want to use that as a starter for gaining fuel efficiency and/or power before diving into a separate project car I want to LS swap. My intent is to daily the Envoy and make very marginal changes. The bigger goal is to learn the HPtuner front to back.
The Envoy is well kept and in great work order with no SEL lights. Any advice on which direction I should go to learn the software? Whether it be more youtube, or parameters to dabble in first?
Thanks!
Ted
All of the above. Read, watch, tune, break everything and figure out how not to break it, honestly.
a21bravo I licensed my camaro 4 credits , then I sent the base tune to my tuner, did I essentially waste 4 credits, should of I waited for my tuner to send back the tune then used my 4 credits, I think I did it backwards,
Someone told me I should of sent him the base tune using no credits, then when my tuner sent back the tune i should of selected “write vechile” then used the 4 credits
Cool thx I need one lol
did you need to replace your ecu to use the tuner
No, this tunes stock ECU.
can someone actually tune your chip and they live another state and cant up the obd1 up and see the reading they just going by the information you gave them of what you got in your car...i would think its hard to get the chip burn correctly especially the frist time..the reason i ask you that because im having that problem now..
I need to del. Vats and stuff so I can do my ls turbo swap in a 73 240z
Where can I buy this and wich one to get for GM
Yes you cam delete VATS, and you can buy on HPtuners website shown in the video.
Helium?
So right now ive got a 2002 Mustang gt N/A. ive got a Vortech v3 kit with power pipe i will be installing soon and im really on the fence. i bought a Moates Quarterhorse and Binary Editor and im just having trouble getting it to work im sure its probably user error and theres just not a lot of support. so its either pay the tuner at the speed shop $500 for a dyno tune or go with the HP tuners. Its tough because love the thought of doing it myself and not having to pay someone.
Really depends how much time you're willing to spend on it, and what risk you're willing to accept. If a lot of time and possible broken parts are an issue the tuner may be the best option. If that's not and issue, or you change parts/upgrade a lot, tuning yourself is worth it in the long run.
Do you have to have a wide band for basic tuning?
I would recommend it... You may be able to do some part throttle tuning with fuel trims, but I would trust that for mid/wide open throttle tuning.
Which wide band would you recommend?
@@zacharyharmon1571 AEM.
When I hit the OS tab, nothing shows up. It's blank. 00 GMC Sierra. Trying to change to a 3 bar MAP for a 7875 Turbo. Any ideas?
Usually its blank when the OS has already been changed. Should be able to look at the details and see what type of OS it is.
@@BlaserBuilds is there a video on how to do that? I am VERY new to HP Tuners
More of these,more in depth,mor,mor,mor!
Sir how to install hp tuners
What do you think about the new version?
I haven't used the MVPI2 but the software seems fine so far.
Very nice man.... I'm not good at tuning... feel free to build me one for my LS 6.0 WITH LJMS STAGE 2 TURBO CAM holley high rise intake 80 lb injectors 102 mm throttle body... lol😁😁
Good stuff man. Been following for awhile now. More in depth on the idle tuning would be great. I’m having issues dealing with the Holley Hi Ram.
how do you download the vcm scanner ? i have the editor but the scanner doesn’t pop out to download am i missing something?
You should be able to find it in the HPtuners program files on the computer.
a21bravo Yeah i have it but its just folders not the application is it because i have the mpvi 2?
thanks man :)
Has anyone here used hptuners on ford cars? I ended up using sct for my 2.3t ranger because i couldn't find any ford/hptuner reviews, might still try it some day.
TIL how to disable the speed governer! :)
48:47 Speedo, Speed limiter.
Great vid!You look like Seth Freakin Rollins!!👍👍👍👍
MVPI2 comes with ZERO credits. Only the original unit came with credits loaded.
When you gonna put a hemi or big block in the ranger 🤣😂🤣😂😎😎😎
Tuesday.
Which big block or hemi???
@@mattsadach5208 All of them...
Guy looks like Robin Williams with a beard.
What I've learned about this is leaving it well alone because it messes up the ECU no thanks I'm too poor
I just don’t understand.. this cost just as much as to get the ECU FLUSHED by a professional, you got more chance to screw things up and more things to worry about , more reading and understanding... why don’t just go to a professional team and make a great tuning with a hard disk of backup to go back to stock ?? You can also get a better increase of HP in this way..
Depends on the person. If you're going to build something once, and never touch it again, id recommend taking it to someone. Since I bought this, I've done 3 ECU's. Once of the ECU's I've flashed hundreds of times because I've changed turbo, injectors, exhaust, added methanol, changed fuel pressure, season changes, increased boost level etc. How many times have you watched someone on a video dyno their car and say "I'm running out of injector, I'll have to come back"... They're now buying new injectors and spending another $400-$600 to get it re-tuned. Depends on the person. I take my stuff to the track so I'm constantly changing things.
a21bravo k i see , this is stuff for people that keep on modifying their vehicle.. but if you don’t crave so much and keep you limit to a CAI and exaust, and as per my case now considering some extra power..would you still suggest that ?
@@Italianborn Might need a a light tune for that, but not worth buying the software. Unless you're really wanting to understand how everything works... I bought it knowing full well that I was going to break stuff (which I have). But pulling the motor, rebuilding the trans etc. doesn't bother me. But it's not for everyone.
a21bravo so i might be better to stick around a diablosport intune i3 or something like that ? Sorry for bugging you but i have a Ram 1500 v6 and not all the tuning works on my engine..
@@Italianborn Could just have a shop dial it in then you could just drive it and not have to worry about changing anything.
This informatio is in spahis
NO you cant brick ECU by reading the ecu.......HP tuners guys in a Live webinar even state this
Sloppy knows what's up
TorquePro is 5.00$,without the Pimp Fee!
This serves a different purpose than Torque Pro... This is scanner, diagnostics, and full emissions compliant tuning capability.
Hola no padrian gravar es videos en español
Looks at algebra to me🥴🤯
MPVI not MVPI
Well shit. Now I have to remake the whole video.
Pls translation in hindi language
Sure they don't want one of your children? That credit bullshit is a scam!
Xdistà