As a newbie to tech, this worked well, thank you! Couple of questions: 1.Once it's installed, can we delete the .iso file (5+ GB) which we downloaded or does it need to stay for everything to work? 2. If we want to 'uninstall' everything we just did and go back to getting the full memory of the macbook back , what are the steps to do that? Thanks in advance!
Please read and reply to help me to get out of confusion. Will it work as smooth as in Windows laptop? If i install window 10/11 with help of UTM in MacBook Pro i7 16GB & 512GB.
Hi, Thank you for this, it is very helpful. But i have some issue with VM. I did all things you do on the video but the VM doesn't work. I have this on the screen when I start the VM: UEFI Interactive Shell v2.2 EDK II UEFI u2.70 (EDK II, 0x00010000) Mapping table FSO: Alias (s) :CD0a65535a0: :BLK1: PciRoot (0x0) /Pci (0x1F,0x2) /Sata (0x0,0xFFFF,0x0) /CDROM (0x0) FS1: Alias (s) :F0a65535a: :BLK2: PciRoot (0x0)/Pci (0x1F,0x2) /Sata(0x0,0xFFFF,0x0) /VenHedia (C5BD4D42-1A76 -4996-8956-73CDA326CD0A) FS2: Alias(s) :F0c65535a: :BLK5: PciRoot (0x0) /Pci (0x1F,0x2) /Sata(0x2,0xFFFF,0x0) /VenMed ia (C5BD4D42-1A76 -4996-0956-73CDA326CD0A) BLKO: Alias (s) : PciRoot (0x0) /Pci (0x1F,0x2) /Sata (0x0,0xFFFF,0x0) BLK3: Alias (s) : PciRoot (0x0) /Pci (0x1F,0x2) /Sata (0x1,0xFFFF,0x0) BLKA: Alias (s) : PciRoot (0x0) /Pci (0x1F,0x2) /Sata (0x2,0xFFFF,0x0) Press ESC in 4 seconds to skip startup.nsh or any other key to continue.
Once I shut down it and I can't open the same windows. it is installing a new one everytime when open after I shutdown. Is there any way open the same windows everytime?
@@TheAnalystLens It did not work even after multiple attempts. I also tried to install windows 10 both x86 and x 64 still it did. not work. It is restarting and then asking to setup windows again.
in UTM power bi is downloaded but how should i download it in mac? Its showing that parallels is needed to install power bi in mac? i didn’t get that. pls tell me
@@TheAnalystLens yes i still have the iso file, but is there is any performance difference between VMware fusion and UTM, i am using it only for running and developing Power BI reports. Also thank you so much for replying! :)
Hi , I am trying to follow the method here. UTM & Sky Fletcher download is fine but the windows 11 keep getting rebooted all the time. I have uninstalled & re-installed the ISO file again & consequently the Windows 11. Can you please help ? Also, would buying the paid UTM version help ?
Guys this worked only for the first time, after that this is not working tried multiple times, gone through every comment and it's replies, it's again and again redirecting to windows setup and Installation process
When I tried to run window 11, it shows a mapping table that you did not have on your video. So I totally get stuck at 7:06 and cannot move more. Please help me!
Hello, brother I hope that this has been handled; if not, please follow the instructions below. Click "ESC" if the installation window error appears after you have completed the entire process as shown in the video. I had the same problem at first, but eventually everything worked as it should have. "no need to do set up again and again" Thanks and @TheAnalystLens Thanks for the nice video.
bro i need ur help its going till the installation page and getting installed but wen it asks to restart it goes back to the same installation page again i have macbook 2017 version i5 processor help please
excuse me my laptop is MacBook Pro M1 and I followed your steps and I finish the setup process, but it doesn't open the desktop it keeps getting me back to the setup step. how can I fix this problem please?
Lo hice y pude acceder al sistema windows pero reinicié y no arranco mas. Intente hace nuevamente el proceso y crea como un loop en en UTM, no avanza a permitirme acceder . No se que hacer porque me di cuenta que no instala las herramientas lo he hecho mil veces ya
@@TheAnalystLens hello This worked for me at the first time But then it suddenly stopped working ! Could you help me please? I get stuck on the shell and it does not start up ! I tried deleting everything and doing all steps again But it did not work Could you please help me ??
For this you need to reinstall the ISO image file in Utm , maybe because of some technical error internet is not enabled. If you want We can upload a video on this topic for this comment, "INTERNET ERROR" .
Does it lag or cause any issues and can you give a solution to use microsoft office for free in mac offline, because the subscription and license is way too expensive
Hi sir can u help me with a problem that after I used power bi in windows- mac & after switching off the laptop again while opening all the data’s that I entered got deleted & again I have to enter the datas & install the power bi again & again.. can anyone help me with this problem ASAP…
i am on a mac 2016 with macos 12. I was able to install windows and then after installation I was able to see the 'restart' option. As soon as the restart was done it is asking to install the windows os again. did anyone face the same issue ?
Maybe your system is booting the ISO image file again and again for this you can do one thing delete the existing UTM application and then reinstall it. Thank you
If u are facing this problem it means there is a configuration problem for this u can just remove the windows image file and then reinstall it again. Thank you
@@TheAnalystLens Hi. Thank you for the video. I feel I am so close to getting this working, but I am also not seeing a wifi connection option. I have removed and reinstalled but this has still not fixed the issue. any other ideas?
As a newbie to tech, this worked well, thank you! Couple of questions:
1.Once it's installed, can we delete the .iso file (5+ GB) which we downloaded or does it need to stay for everything to work?
2. If we want to 'uninstall' everything we just did and go back to getting the full memory of the macbook back , what are the steps to do that?
Thanks in advance!
Thank you buddy keep supporting us.
@@TheAnalystLensit would be nice to have your responses to the questions asked in my comment. Thanks
@@anandm5849 hey how'd you get .iso file separately because it's only the app itself from the app store that
i downloaded...
Thank you, it worked, but it's a bit laggy. Also tried to install SSMS, but I don't know, what would you do mate?
Hey your welcome, I'm working as a business analyst
Hey your welcome, I'm working as a business analyst
After the installation I am facing an issue with drivers, I get stuck as there are no WIFI drivers, so the setup doesn't move forward.
Please read and reply to help me to get out of confusion.
Will it work as smooth as in Windows laptop? If i install window 10/11 with help of UTM in MacBook Pro i7 16GB & 512GB.
It will smooth well but it also depends on the application you are using on the windows
Hi,
Thank you for this, it is very helpful.
But i have some issue with VM. I did all things you do on the video but the VM doesn't work. I have this on the screen when I start the VM:
UEFI Interactive Shell v2.2
EDK II
UEFI u2.70
(EDK II, 0x00010000)
Mapping table
FSO: Alias (s) :CD0a65535a0: :BLK1:
PciRoot (0x0) /Pci (0x1F,0x2) /Sata (0x0,0xFFFF,0x0) /CDROM (0x0)
FS1: Alias (s) :F0a65535a: :BLK2:
PciRoot (0x0)/Pci (0x1F,0x2) /Sata(0x0,0xFFFF,0x0) /VenHedia (C5BD4D42-1A76
-4996-8956-73CDA326CD0A)
FS2: Alias(s) :F0c65535a: :BLK5:
PciRoot (0x0) /Pci (0x1F,0x2) /Sata(0x2,0xFFFF,0x0) /VenMed ia (C5BD4D42-1A76
-4996-0956-73CDA326CD0A)
BLKO: Alias (s) :
PciRoot (0x0) /Pci (0x1F,0x2) /Sata (0x0,0xFFFF,0x0)
BLK3: Alias (s) :
PciRoot (0x0) /Pci (0x1F,0x2) /Sata (0x1,0xFFFF,0x0)
BLKA: Alias (s) :
PciRoot (0x0) /Pci (0x1F,0x2) /Sata (0x2,0xFFFF,0x0)
Press ESC in 4 seconds to skip startup.nsh or any other key to continue.
Just delete the existing data from the utm
@@TheAnalystLensI m having the same issue it’s stuck what should I do
Is 4 gb ram is enough for windows ? Or should i upgrade?
It's enough
Facing issues with the wifi drivers installation
Once I shut down it and I can't open the same windows. it is installing a new one everytime when open after I shutdown. Is there any way open the same windows everytime?
Please delete the current iso file image and then restart your mac and upload new iso file image.
I have mac os catalina. which doesn't allow me to download the crystal fetch iso downloader on apple app store. so how can I go further? plz help me
Please share the screenshot
hi it keeps asking me to install windows multilple times even after installing . can you please tell me what to do
A mi también me esta pasando
Same here can anybody help?
Please delete the existing iso image file and repeat the same process.
When you're done installing windows and it asks you to press a key again, you don't press any key but you just wait.
@@TheAnalystLens It did not work even after multiple attempts. I also tried to install windows 10 both x86 and x 64 still it did. not work.
It is restarting and then asking to setup windows again.
how can you get that UA-cam icon on bar & how is your icons are highlighting while you moving your curser on that icons
U can do it while uploading ur video on UA-cam.
Is it safe , can i start my office work with this ?
Yes it is completely safe
@@TheAnalystLens does it crash while using?
in UTM power bi is downloaded but how should i download it in mac? Its showing that parallels is needed to install power bi in mac? i didn’t get that. pls tell me
You can connect us over mail
Hi,
The system is repeatedly restarting and the same process needs to be done. can you help me with this?
Please delete the existing iso image and then repeat the process
@@TheAnalystLens I tried twice bro, still same problem ! please give any solution for this as soon as possible, my work is pending !
can we do all this in an external ssd
No, because iso image needs to be saved in internal
I’m stuck at minute 6:52, when I tried playing the windows set up it just keeps saying error QEMU exited from an error…..
I use a Mac book pro 2023
Delete your current iso file image and repeat the same process after restarting your machine
@@TheAnalystLensRestarting the machine means what ? What Should we restart ? Can you tell that clearly ?
Hey can you tell me if we can have MS Office (Power Point, Excel) installed here ?
No u need to install it separately.
I wanted to know does it harm the mac processor as you are running and using windows on it... please lmk
I have M1 2020 version
No it wouldn't harm your MacBook.
do need the crystal fetch app if we already have an iso file ?
If you have an iso file you can directly upload it on utm
@@TheAnalystLens yes i still have the iso file, but is there is any performance difference between VMware fusion and UTM, i am using it only for running and developing Power BI reports.
Also thank you so much for replying! :)
Hi, i followed the procedure but I am getting an error saying QEMU error, failed to lock byte 100
Please connect us through mail.
I am trying with the same steps but it keeps installing the windows again and again.......any clue what I am doing wrong?
Delete your current iso file image and repeat the same process after restarting your machine.
Hi , I am trying to follow the method here. UTM & Sky Fletcher download is fine but the windows 11 keep getting rebooted all the time. I have uninstalled & re-installed the ISO file again & consequently the Windows 11. Can you please help ? Also, would buying the paid UTM version help ?
No you don't need to buy the paid version of the UTM. Delete the current Utm application and then install it again.
Guys this worked only for the first time, after that this is not working tried multiple times, gone through every comment and it's replies, it's again and again redirecting to windows setup and Installation process
Once you setup the window interface on mac you don't need to repeat this process again and again.
Thank you
I'm stuck at the UTM website because it would not download. But when I click on Mac App Store , it loads.
Try to download it again
@@TheAnalystLenslike I can’t download it at all.
finally work for me but how will I import data
You need to connect your mail
where can I download the ISO file?
You have to download it from crystal fetch
does this work for macbook air intel processor ?
Yes
@@TheAnalystLens no
no
I'm stuck here 7:01 , it shows black page with weird codes and a lot of "mapping" and don't go forward
me pasa igual necesito ayuda :(
Please delete the existing iso image file and repeat the same process.
@@TheAnalystLens same problem - i've deleted the iso file and downloaded again, but the result is the same :(
@@TheAnalystLenssame with me brother
But doesn’t work after deleting and making another iso file
@@TheAnalystLensplease asap
It’s very urgent for me to download
Your process did work for me, Thank you so much for this video.
Please support us. Thank you share this with others too
When I tried to run window 11, it shows a mapping table that you did not have on your video. So I totally get stuck at 7:06 and cannot move more. Please help me!
My Mac is Mac Air 13 is one of M1 chip
Yes it will work you just need to re configure it.
Am stuck here too.
@@TheAnalystLensI’m stuck. The same thing it’s happening to me
@@TheAnalystLens How do I reconfigure it?
its is asking me the process of instalattion in utm for windows again and again please help me with the solution
First delete the existing utm application and then repeat the same process
Hello, brother I hope that this has been handled; if not, please follow the instructions below. Click "ESC" if the installation window error appears after you have completed the entire process as shown in the video. I had the same problem at first, but eventually everything worked as it should have.
"no need to do set up again and again" Thanks and @TheAnalystLens Thanks for the nice video.
bro i need ur help its going till the installation page and getting installed but wen it asks to restart it goes back to the same installation page again i have macbook 2017 version i5 processor help please
Delete the current iso file image and repeat the process.
Having issue with internet when switched to windows
You need to restart the utm once
Like how to switch off the laptop & not getting the data’s deleted in windows- mac while I m opening .. pls reply ASAP
Please login to your power bi account in UTM.
excuse me my laptop is MacBook Pro M1 and I followed your steps and I finish the setup process, but it doesn't open the desktop it keeps getting me back to the setup step. how can I fix this problem please?
Please repeat the same process again.
@@TheAnalystLens I repeated it three times and it keeps restart on setup process
??
free option is asvilable for learning power bi
LOCKED BYTE EEROR is showing up what to do ?
Please reinstall the iso file image
It didn't work for me. Is there a way to communicate to show you the problem?
Connect us over mail
The resolution of the window in UTM is not good, Its a little blurry and lags to much, what to do?
While installing the iso image in utm choose the higher version of windows which will improve the resolution of your windows.
Can you please provide the link to get .iso file?
You need to download the ISO file on your MacBook.
Thanku you
Bro have you got the link... Could you please provide the link
Can you give a link to download windows 11
You need to download the iso image file from Crystal fetch.
@@TheAnalystLens Thank you 😊….
Hello.
The installation of Windows 11 is not working on my MacBook Pro. What do I need to do?
Is it completely not working or laging
It worked, thank you
Your welcome 🤗
It is taking me to a command prompt page after i and done with with adding the iso file in UTM and press the play button. Please HELP!
same happened with me
no idea what to do
It's due to the Mac specification first re-start your mac and then upload a new iso file image and then click on start.
This video was of great help. Much needed thing . Thanks for this one.
Thank you keep supporting us.
Could have been better if you could have included the steps for downloading "Windows ISO Image File".
It's a one step process and already included in the video.
Hiii…it is showing error when tried to press the play button in UTM …can you please help?
Remove the current iso image file and repeat the same process.
Lo hice y pude acceder al sistema windows pero reinicié y no arranco mas. Intente hace nuevamente el proceso y crea como un loop en en UTM, no avanza a permitirme acceder . No se que hacer porque me di cuenta que no instala las herramientas lo he hecho mil veces ya
Thanku
Lets connect to a network after this i didn’t getting next option even i am connected with wifi still is it showing connect to a network
Sure will u please describe ur issue
Bro, is the existing wifi of mac running on UTM windows?
Yes it's running
after downlading crystal fetch windows is not getting installed what to do ?
Please connect us over mail with your issue
It worked for me first time, now its showing “cannot access TPM data” , can anyone help on this.
Maybe there is some bios issue, try to login it again
Thankyou soo much sir !!!!!!! this video is really helpful for me
Thanks for supporting us.
@@TheAnalystLens Thankyou sir !!!!!!!
Facing UEFI interactive shell v2.2
Delete your current iso file image and repeat the same process after restarting your machine
Worked like a charm! thank you so much
Thank you for this supporting us.
@@TheAnalystLens hello
This worked for me at the first time
But then it suddenly stopped working !
Could you help me please?
I get stuck on the shell and it does not start up !
I tried deleting everything and doing all steps again
But it did not work
Could you please help me ??
How much free disk space is needed to instal windows ??
Up 12gb
Hey bro... I'm unable to het into the windows 11 after installing UTM and all... Its asking for command... Please help me
Please Delete the iso image file and load it again in UTM.
It's still not work and same, the command appear
hey, i'm not able to connect to wifi bro,please helppp, i'm using macbook pro m2 chip
Please delete the existing iso file image and reinstall it on utm.
The new office were installed but I can't connect to the internet to download Power BI ... How can I connect it to the internet by wifi ?
For this you need to reinstall the ISO image file in Utm , maybe because of some technical error internet is not enabled. If you want We can upload a video on this topic for this comment, "INTERNET ERROR" .
INTERNET ERROR@@TheAnalystLens
@@TheAnalystLens internet error 🥲
I am getting "start boot option" after installation. What to do. Plz help
please reinstall the iso image file again.
Does it lag or cause any issues and can you give a solution to use microsoft office for free in mac offline, because the subscription and license is way too expensive
No it doesn't lag much it will be a helpful way to use windows application.
does this version of windows iso file not work with apple silicon??
It works on the silicon version too I am using it on that.
Yes, it will work.
Thanks bro I needed this
Any time
Hi sir can u help me with a problem that after I used power bi in windows- mac & after switching off the laptop again while opening all the data’s that I entered got deleted & again I have to enter the datas & install the power bi again & again.. can anyone help me with this problem ASAP…
You must login to your power bi account in utm in order to save data permanently
How to swiftly switch from UTM to mac screen
just minimise the UTM tab and close it .keep supporting us
bro it got downloaded but i am unable to downlaod powerbi bcoz it showing network not conncected so how to connect in utm
You need to give the access permission at the beginning of the process.
Wow. Very detailed. It helped me. Thank you.
You're welcome!
My Mac Air is use x86, can I use UTM?
Yes, please check your disk size also.
iPad me kese karu?
I will upload a video for this
thanks brother you solved a very big problem
Thanks for supporting us.
Thank you very much for the clear guidelines
thank you
Is rly running smooth like on windows ??
Omg it really worked, thank you so much
Thanks you. Please support us.
i cant connect the windows to any wifi :/
Please reinstall the Iso image file in utm. Thank you
will the laptop crash or some virus attack
No it's safe.
i am on a mac 2016 with macos 12. I was able to install windows and then after installation I was able to see the 'restart' option. As soon as the restart was done it is asking to install the windows os again. did anyone face the same issue ?
some time you face this issue due to technical configuration. please repeat the same process again.
I don't know how its work on your Mac but I tried several time and its not working
Will you describe the issue you are facing?
Thank you so much dear it helps me be blessed
It means a lot.
@@TheAnalystLens All the best keep going
Thank you so muchhh
Your welcome keep supporting us
Hii is it working fine ? Can you help me out ?
Mine keeps asking me to install windows setup. It completes then asks again. Please help
Nvm got it.
Please uninstall the utm and then again install it and upload utm image file.
thankyou so much
Keep supporting us
Thank you very much
Keep supporting us
Keep supporting us
I am unable to connect to the internet using UTM
For you need to do some settings which model of mac you are using.
same issue
@@TheAnalystLens please help, I use MacBook air m1
Thankuhh...it worked for meee
Thank you keep supporting us
i am stuck after installing it on UTM at 6:57
Please connect me over mail
Thanks , it worked for me too
Keep supporting us
are bhai ye baar baar installing windows kyu ho ra h??
iske aage ka kuch nhi aa ra h, and laptop heat b bohot ho rha h.
Maybe your system is booting the ISO image file again and again for this you can do one thing delete the existing UTM application and then reinstall it. Thank you
It is not working fior me. I tried closing UT,m and again open it still not working and also my macbook getting hetaed . Please help
Which version of MacBook are you using?
@@TheAnalystLens M3 Air
Muito obrigado! Passo a passo simples, rápido e GRATUITO
Thank you
thanks a lot, It worked!
thank you
bro it is showing qemu error
Delete your current iso file image and repeat the same process after restarting your machine
It’s not working on MacBook Air intel
Which version are u using?
There is no WiFi option in virtual machine
If u are facing this problem it means there is a configuration problem for this u can just remove the windows image file and then reinstall it again.
Thank you
I am facing the same problem can u explain how to Remove it please 😢
@@nidhishukla2832 Did it work?
@@TheAnalystLens Hi. Thank you for the video. I feel I am so close to getting this working, but I am also not seeing a wifi connection option. I have removed and reinstalled but this has still not fixed the issue. any other ideas?
Thank you
You're welcome
Keep supporting us
idk why it again and again asking to set up windows
In this case just close the utm and again start the window file in utm.
Thank you
@@TheAnalystLens does not work)
You skipped the downloading the iso image of windows 11
I already downloaded that but i mentioned the process of downloading the iSO file image
i can't install CrystalFetch ISO Downloader as MacOS 12+ version is required.
Yes same. Please help with another alternative.
You can try parallel space for this
FOR ME ITS SHOWING ERROR
Will you please delete the current iso file image and repeat the process.
@@TheAnalystLens okk sir
thanks bro
Welcome brother keep supporting us
it for free?
Yes it's completely free.
It is completely free and you can use it without any charges.
did it work?
@@jenniferyepez1947yes it works really better than parallel which is paid. Very helpful video
yes it really work.
@@jenniferyepez1947
QEMU error
Please reinstall the iso file image